Does anyone know how to remove the antenna stud on the tour pak, thought it would just unscrew but that does not seem to be the case?
Remove antenna lead from inside tour pack.
Loosen thin nut inside tour pack on antenna wire lead stud.
Find a 1/2" fine thread nut and jam it against thin nut.
With the 2 nuts locked together, screw the antenna lead post out enough so you can then lift the antenna post out of the outside of the tourpack.
You can take the inside lead post all of the way out of the tourpack or just enough to lift the outside post up and out of the way.
CB post-the inside lead post has a allen recess cut into it. Find the right size allen and screw that small lead psot out until you can remove the outside post.
Basically the inside wire lead posts have a indention on them that retains the outside posts that the antennas screw onto.