CVO Technical > Drive Train
Clutch Lever Master Cylinder Kit
(1/1)
Rimjam:
Clutch lever master cylinder on the '00 SERG started leaking slightly at the wiper recently (not the cap). Hydraulic clutch assy was installed by previous owner. Time for a rebuild kit. Prices on eBay about $55 for the clutch kit but only about $18 for the front brake kit. They're both 11/16" & appear identical - what gives? OK to use a brake kit in the clutch?
Rimjam:
OK, a brake m/cyl kit will NOT work in a clutch m/cyl. Parts are almost the same but the brake wiper will not pop into the clutch m/cyl housing. I ruined two new wipers in the attempt & had to buy complete kits each time (can't buy just the wiper). I finally bought a Drag Spec clutch kit online ($30) & managed to install it AFTER fabricating a piece of PVC pipe to squeeze the rubber cupped washers down to bore size (PVC I.D.=.70). If anyone HAS used a brake kit in their clutch m/cyl please chime in & tell me how you got that #&!% wiper in there.
Navigation
[0] Message Index
Go to full version