www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: lifter noise  (Read 3743 times)

0 Members and 1 Guest are viewing this topic.

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
lifter noise
« on: July 15, 2020, 01:03:51 PM »
I greet you members cvo h-d
I am writing to you from Europe-Slovakia
I would like advice I'm going to change S&S hydralic lifters HL²T
Adjustable Pushrod screamin eagle how many turns do i need S&S writes 4 and screamin eagle two and a half turns
motorcycle ultra SE2 thank you for the advice

DAKUJEM  ;)
Logged
ELECTRA GLIDE SE2  2007

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #1 on: July 15, 2020, 01:15:07 PM »
Read the h2lt instructions.  The thread pitch changes the preload turns. The h2lt has a very different adjustment process. The limited lifters do not eliminate noise, they are best for high spring pressure builds to help with hot starts.
Logged

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #2 on: July 15, 2020, 01:17:56 PM »
Quote from: HD Street Performance on July 15, 2020, 01:15:07 PM
Read the h2lt instructions.  The thread pitch changes the preload turns. The h2lt has a very different adjustment process.
could you please advise me how many turns i should give


according to this table there should be 4 turns
https://www.sscycle.com/tech-info/pushrod-adjustment
« Last Edit: July 15, 2020, 01:39:48 PM by Medal41 »
Logged
ELECTRA GLIDE SE2  2007

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #3 on: July 15, 2020, 04:32:02 PM »
About .050" off the bottom. Without the thread pitch no way of knowing the turns
Logged

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #4 on: July 15, 2020, 04:38:02 PM »
Logged
ELECTRA GLIDE SE2  2007

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #5 on: July 15, 2020, 05:04:49 PM »
Not 4 turns from the top. Bottomed without oil in them and 1 turn up, .042 off the bottom.
Logged

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #6 on: July 15, 2020, 05:18:02 PM »
Quote from: HD Street Performance on July 15, 2020, 05:04:49 PM
Not 4 turns from the top. Bottomed without oil in them and 1 turn up, .042 off the bottom.
if i understood 4 questions correctly? thank you for your answer
Logged
ELECTRA GLIDE SE2  2007

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: lifter noise
« Reply #7 on: July 16, 2020, 09:58:09 AM »

S&S uses 32 threads per inch.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #8 on: July 16, 2020, 11:02:31 AM »
Jerry, he has SE pushrods, 24tpi
If we were really splitting hairs, the 24tpi will obtain the same extension at 3/4 of a turn vs the S&S instructions for the h2lt of 1 turn with their pushrods. In my experience not critical. At 1 turn we  are talking about a
.009" difference.
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4063

Re: lifter noise
« Reply #9 on: July 16, 2020, 03:06:03 PM »
This should help watch till the end it will show how to figure out how many turns to adjust

« Last Edit: July 16, 2020, 03:13:23 PM by longlast »
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #10 on: July 16, 2020, 03:57:27 PM »
Adjusting off the bottom is not conventional but it is required with the h2lt lifters
Logged

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #11 on: July 17, 2020, 04:06:06 PM »
Dakujem pekne za vaše rady

thank you for your advice
Logged
ELECTRA GLIDE SE2  2007

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #12 on: August 15, 2020, 09:56:16 AM »
hello I replaced the cams S&S 585 do I have to go change the fuel map?  because I feel that the speed of 2000-3000 is a restless engine thank you for the answer
these components I replaced everything from S&S pushrod.  cams 585 chain tensioner rods
Logged
ELECTRA GLIDE SE2  2007

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3118
Re: lifter noise
« Reply #13 on: August 15, 2020, 11:47:56 AM »
By changing the cam you changed the engines requirements. It needs to be retuned.
Logged

Medal41

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • www.CVOHARLEY.com
Re: lifter noise
« Reply #14 on: August 15, 2020, 01:28:13 PM »
Quote from: HD Street Performance on August 15, 2020, 11:47:56 AM
By changing the cam you changed the engines requirements. It needs to be retuned.
do you think i should also change the gas injectors for bigger? or it is not necessary
Logged
ELECTRA GLIDE SE2  2007
Pages: [1] 2  All
« previous next »
 

Page created in 0.13 seconds with 21 queries.