Well, I bit the bullet and went for a King TourPak to match the Hard Saddlebags for my SERK. I ordered it in primer and will send it out to Paint By Gene for a matching paint job.
I ordered the whole package from Jenny at Charlies HD. KTP in Primer, all required hardware and key matched lock, Detachable TP Rack, TP Spoiler in Primer, Contoured TP Luggage Rack, TP Liner Bag, TP Interior light kit, TP & Saddlebag Organizer Kit, and all required mounting hardware. Grand total with shipping is $1350. The seat-matching Corbin Flame-stitched Trunk Rest is another $239. About $1600 plus paint for the whole setup. I hope Binx really likes having a TP now! ::)
Of course, I'll get pictures for ya'll when the whole thing is completed. Be patient, it'll take a few months for this to come together.
And it's still not a FD and never will be! ;)
Hoist! 8)
That's true Howie. Not a full dresser at all.That's right Howie, remember it's all about Binx and her comfort while riding. She wants tunes.
(it's a MD [mostly dresser] {so where you gonna hang the radio next?})
That's true Howie. Not a full dresser at all.
(it's a MD [mostly dresser] {so where you gonna hang the radio next?})
That's right Howie, remember it's all about Binx and her comfort while riding. She wants tunes.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
I just love it when someone reads my mind ;D
Anyone remember Elvis before the croc bags and seat ? Can't help but think that's where Howie's headed.
B B
While you're at it Howie, might as well get it all over with at once. http://www.hoppeindustries.com/spstrhb.htmlOr Dragonfly (http://www.dragonflycycleconcepts.com/fairings.htm)?? I'm sure Neal could assist you in deciding which would be the right one. :huepfenlol2:
You can't fight it forever. ;D
:indian_chief:
Remember Gary, they're in helmets all the time now. She can just velcro one of those small iPods and a pair of little digital speakers to the back of his lid. All the controls will be handy and she'll finally be putting his noggin to good use :bananarock: !Oh he!! yea!!! Howie would need to get speakers in the KTP, and then she could borrow JR's speakers for Howie to wear for front speakers pointed back to her. :huepfenlol2:
(I'll be damned, just noticed on the calendar that it's "Yank Howie's Chain Day!")
Well, I bit the bullet and went for a King TourPak to match the Hard Saddlebags for my SERK. I ordered it in primer and will send it out to Paint By Gene for a matching paint job.
I ordered the whole package from Jenny at Charlies HD. KTP in Primer, all required hardware and key matched lock, Detachable TP Rack, TP Spoiler in Primer, Contoured TP Luggage Rack, TP Liner Bag, TP Interior light kit, TP & Saddlebag Organizer Kit, and all required mounting hardware. Grand total with shipping is $1350. The seat-matching Corbin Flame-stitched Trunk Rest is another $239. About $1600 plus paint for the whole setup. I hope Binx really likes having a TP now! ::)
Of course, I'll get pictures for ya'll when the whole thing is completed. Be patient, it'll take a few months for this to come together.
And it's still not a FD and never will be! ;)
Hoist! 8)
so rider forward its a Road King and BSR back its a FD
best of both worlds to keep both happy
Howie, Congrats on your award and more importantly the great trip that came with it. Question for you re your seat. When you talked to Corbin did they tell you they were going to put flames on the 07 SERK seat? As you may recall Becky with Corbin in Florida had originally told me they would do that. She was to have sent me some samples so I could decide if I wanted to try and match the braids/welts on the seat to my bike. Anyway I had not received the samples so when I was at a rally last weekend I asked the Corbin rep about the seats and samples. Corbin rep (John, also from Florida) stated that the new company policy was "no flames" on the 07 SERK seat. He stated that the 07 SERK seat would come with the stripe that is pictured on their web site, though we did have a choice as to the material for the stripe. Anyway was just wondering what the heck was going on as I keep getting conflicting stories. jj
Thanks jj! I've not gotten one indication from anyone that a Flame-stitched Corbin for the SERK is a problem. Rich 07 has one on his now. His has a slight clearance issue at the tank panel, which supposedly Corbin has corrected now. Is your problem a non-heated version. Both of our seats are heated. A heated seat needs some type of stitching pattern in it. Maybe that's the difference. If they won't make a plain one for you, just order a heated one. Can't come up with any other reason that you'd be having trouble getting one. :confused5:
Hoist! 8)
Holy crap! Not! :P
Don't think I wasn't prepared for the onslaught! The Fairing just isn't going to happen. I think ya'll already know that. Neal secride it best:
....
YOU FD GUYS KILL ME! ;)
Hoist! 8)
-- - - especially since he's in process turning his SERK into a sport tourer ;)
B B
Not that he will admit that he is heading down that path.
At least not right now.
Maybe not for a month or six.
Let's see what a year brings. ........
but you can do so much more with a fairing
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=12006.0;attach=25533;image)
Is it Mike's (Puzzled)? :nixweiss:
N
Whose bike is that?
Do you have a better picture?
:nixweiss:
Yep it is. See this thread - Pioneer AVIC N2 install (http://www.cvoharley.com/smf/index.php?topic=12006.0).
N
Whose bike is that?
Do you have a better picture?
:nixweiss:
And just for the record ------- I'm not a FD guy!!!!!!!!!!!!!!!!!
Thanks jj! I've not gotten one indication from anyone that a Flame-stitched Corbin for the SERK is a problem. Rich 07 has one on his now. His has a slight clearance issue at the tank panel, which supposedly Corbin has corrected now. Is your problem a non-heated version. Both of our seats are heated. A heated seat needs some type of stitching pattern in it. Maybe that's the difference. If they won't make a plain one for you, just order a heated one. Can't come up with any other reason that you'd be having trouble getting one. :confused5:Hoist, I have had a flame stitched, non-heated, Corbin seat for several months. When I noticed that the gap between the tank and the seat was wider than it had been when I first installed it I contacted Corbin and that is when I was advised that Corbin had initially sent me the wrong seat. That is also when the issue of flame stitching and whether or not one could get it on the CVO seat came up. I was initially told no flames on CVO seat but after I complained Becky told me they would do it since the original mistake had been theirs. However as I said when I talked to a Corbin rep last week he said they would not put the flames on the CVO seat. Guess we will know for sure when your seat comes in. I may just go ahead and get the Corbin with the stripe down the center and try and match it to the blue on the black ice. http://corbin.com/harley/king/hdrkcvo7dt.shtml Seems like the only thing we know for sure is that if you ride it you will get a rear head gasket leak. ;D Oh well there are bigger problems to worry about than this. Flames or stripes it will still beat the stock seat. jj
Hoist! 8)
That's true Howie. Not a full dresser at all.
(it's a MD [mostly dresser] {so where you gonna hang the radio next?})
Hi Hoist. What color are you going to paint youre tour pak? I have thought of doing the same thing but can't decide what to do about color. I need help!!! kb
Howie,
I believe this is the system from 2WheelTunes. JP Cycles carries them among others. The best part of this system is that you could utilize the wires that used to run to your directionals before relocating to the nacelle. that were inside the bars. That should make you go DOH! I thought of it as I was cutting off the wires flush to the switch housings. I heard them at Sturgis, but not while on the road.
By the way, with a tour pak you can be a half-fast FD.
Link to JP Cycles
http://www.jpcycles.com/productgroup.aspx?GID=985EB816-B9AC-471D-BEBB-BDBFD2B6F322&brand=2wheeltunes
Howie...Zumos..Devices...interfaces..Roadking..GPS..TP's
Howie, I don't know you any more. I'm really let down. no....It's depressing.... sigh... :D
Thanks Phil. If I'm not mistaken, that's the system I'm using to connect to the Garmin Zumo/XM system, instead of using a portable device. The XM interfaces nicely with the Zumo screen for control. Overall, it made for a nice system, not much bulkier than just adding GPS alone. Appreciate the link.Hoist. Are those the speakers that your friend mounted on his serk? Any problems with them hitting the tank when handlebars turned all the way to one side? I have been thinking about getting a set of external speakers for my zumo. Was waiting to see these when they came out, were supposed to have been out this fall but looks like it is not going to happen. http://www.kuryakyn.com/products.asp?bn=harley&ci=3889 Also as to the kuryakyn adjustable pegs, I have them mounted on my bike. You will have to enlarge (drill) the small hole where the peg goes to allow your peg to attach. jj
On another note, I spoke with Gene (painter) today. He agrees with my paint scheme for the KTP. Leaf flames on the sides, marbling on both sides of the lid, raised flame in the recessed center of the lid, and Screamin' Eagle logo on the rear panel. It should match up really well with the paint scheme he used for my hard bags.
When all this is done, Binx should really be happy back there on longer trips, we'll both have tunes, I'll still be on a normal bike from my seating position, and I can strip it all down quickly anytime I want. All-in-all, this will add another dimension to Cybil, my girl with many personalities! And with the new engine, hopefully without breaking or leaking anymore either! ;)
Hoist! 8)
Hoist. Are those the speakers that your friend mounted on his serk? Any problems with them hitting the tank when handlebars turned all the way to one side? I have been thinking about getting a set of external speakers for my zumo. Was waiting to see these when they came out, were supposed to have been out this fall but looks like it is not going to happen. http://www.kuryakyn.com/products.asp?bn=harley&ci=3889 Also as to the kuryakyn adjustable pegs, I have them mounted on my bike. You will have to enlarge (drill) the small hole where the peg goes to allow your peg to attach. jj
The speakers I'm using are the ones referred to by Phil in the J&P Cycles link below. They're actually bullet turn signal housings that mount where the original SERK turn signals were mounted, before I relocated the to the spot lights. So they clear everything without a problem.
Actually, I'm taking it a step further now. Since I'm adding the KTP, I figured why not add speakers to the TP, Ultra style! :o I ordered the 6.5" Speaker Pod Housings from eGlideGoodies (yeah I know) as recommended by Jim. Jim is sending me a 150W/Ch Hawg Wired amp to mount in the KTP for the rear speakers, which I'll make detachable with the rest of the KTP.
This way, I'll have some really decent sound when the KTP is mounted. Yet, I'll still have something, with the 50W/Ch front amp and Bullet Speakers, when the KTP is detached. I hadn't seen this done yet with the Zumo on a RK, but I didn't see why it couldn't be done. Jim thought it was a great idea, and sees no reason why it won't work!
So, my next question.....Has anyone ever heard of companies called Dragonfly or Hoppe?
NOT!!!
;D ;D ;D ;D ;D
Hoist! 8)
:zroflmao: :zroflmao: :zroflmao:
The speakers I'm using are the ones referred to by Phil in the J&P Cycles link below. They're actually bullet turn signal housings that mount where the original SERK turn signals were mounted, before I relocated the to the spot lights. So they clear everything without a problem.
Actually, I'm taking it a step further now. Since I'm adding the KTP, I figured why not add speakers to the TP, Ultra style! :o I ordered the 6.5" Speaker Pod Housings from eGlideGoodies (yeah I know) as recommended by Jim. Jim is sending me a 150W/Ch Hawg Wired amp to mount in the KTP for the rear speakers, which I'll make detachable with the rest of the KTP.
This way, I'll have some really decent sound when the KTP is mounted. Yet, I'll still have something, with the 50W/Ch front amp and Bullet Speakers, when the KTP is detached. I hadn't seen this done yet with the Zumo on a RK, but I didn't see why it couldn't be done. Jim thought it was a great idea, and sees no reason why it won't work!
So, my next question.....Has anyone ever heard of companies called Dragonfly or Hoppe?
NOT!!!
;D ;D ;D ;D ;D
Hoist! 8)
Then there is Deadcenter Fairing Howie (80 watt, ipod compatible, polk audio drivers, ciggy lighter and the biggie, it is removable)....
I picked up a KTP myself...Big a$$ rack on top with a spoiler and speakers. Now to gut the harness and find a source for those little black 3 pin wiring connectors to light it (any ideas)....I like the idea of your paint scheme, I'll do something similar too...Leafed side flame, marbleized top insert and if you don't mind a SE logo on the back too!
Good luck with your projects this winter
Miker
You're SERK is awesome miker, but you took it 1 step further than I'd like to. NO FAIRING! ;D
Have fun with your winter work. Oh yeah, you don't get winter down there! ::)
Hoist! 8)
Thats right Howie, riding season is here! Don't worry pal, I still go topless now and then big fella! No windshield, no fairing. I do like the fairing for bug season during the summer and to hide behind during toad stranglin downpours...You know where to go when winter is getting old, come on down and ride the hand shifter or the dyna or the monkey!
We are off to somewhere (no gps, no plan, no clue) in soflo next week slurp a few beverages...
Miker
Just spoke to Jenny. All the parts but the TP itself are in. Everything should ship this week. Once I get everything, off it goes to Paint By Gene in WA. The engine should be done and I should have the bike back, before the TP comes back from Gene. We can mount & wire the Zumo and front amp/speakers, and get all the wiring run for the rear TP amp/speakers and TP spoiler light. Then just mount the amp and speakers and plug it all in, when it arrives back from Gene. This should be cool! ;)
Hoist! 8)
Is the order from the dealer all TP parts? If so why not have her send it to the painter and save an extra round of shipping $$$?
I'm shipping Gene more than just the TP. I wanted to check evrything out first, then send him everything that he's painting/assembling. Thanks! ;)
Hoist! 8)
d'uh, one of the bad things about this place is it's too easy to type the first thought that is in your head at the moment without thinking (at that moment) that it's probably a pretty dumb thought.... :huepfenlol2:
Hey, you're spending quite a bit of time down here in the SERK section lately, aren't you?!? :nixweiss: :huepfenlol2:
Buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine, buy the '02 Candy Brandywine!
I'm shipping Gene more than just the TP. I wanted to check evrything out first, then send him everything that he's painting/assembling. Thanks! ;)
Hoist! 8)
Howie, can you pm me Genes address and phone....I just found out today my painter is back spraying cars...seems the big custom chopper thing is dead down here and he had to close his shop....I will look locally in the meanwhile.
Thanks for your time
Miker
I emailed him but today I will snoop around the indy chopper shop to see if I can find a local just to spray it in black ice.
It was off a uc and has all the lights, tenners and crap on it, so I don't how much room there is to serk it, if you know what I mean.
It has a little grind on the lid and 3" crack in the box, so it would make it tough on Gene to ask for a quote or turnaround time...
It is vivid black now and I can use it but....but.
Thanks again Howie.
Miker
Howie, call me if you are interested in a deadcenter fairing painted to match our paint job.
the inner is painted too, plus a cigar lighter.
seriously
TN
same pod/speakers i have. it will be a tight fit
Howie, call me if you are interested in a deadcenter fairing painted to match our paint job.
the inner is painted too, plus a cigar lighter.
seriously
TN
What about with one of those speaker extention collars?
Hoist! 8)
why the fairing phobia??....the sound system makes up for alot. :drummer:
you need to be healed .... :idea2:
Yeah, noisy rocker box slamming itself and whinning trannies.
TN
Wouldn't you need the antenna when you put the fairing w/radio on the front? :nixweiss: :devil: :evilgrin:
That was just to easy to resist. :huepfenlol2: :lolk: :zroflmao:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
What to do? :nixweiss:
The new primered KTP finally showed up today. But it's the wrong one! They ordered me a EG KTP, not a RK one. It has the antenna connector already mounted in it. Now there's a hole for that mount. Should I remove it and have the hole patched, or return it for a new clean one? As usual, nothing's straightforward as it should be! Damn! >:( ::)
Hoist! 8)
Could you put a flag mount init?
I think the hole is too close to the edge for good support. I use the clip on flag mount anyway.
The new TP's are a plastic material, and won't take a patch like the FG ones. After a little time, you'll see the circular patch outlines in the paint. So I'd rather start clean. ;)
BTW, before I ship it back, does anyone need it?
Hoist! 8)
Ahh, I see, says the blind man.
I don't need it, my UC pak will be done this week, I hope. I need to order the little sticky foam gackets for under the spoiler though, I forgot to when I stepped into "that place".
I'd love one of those SE inserts the 08's have on the back.
Miker
Wouldn't you need the antenna when you put the fairing w/radio on the front? :nixweiss: :devil: :evilgrin:
That was just to easy to resist. :huepfenlol2: :lolk: :zroflmao:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Gary doesn't miss an opportunity! You going to let that one slide Howie ? :apple: :carrot: :jalapeno: :cucumber:
I haven't seen it. You got a pic of it? Thanks. :2vrolijk_21:
Hoist! 8)
Not if is duracell brown though.... :nervous:
Miker
Well, good news from Jenny! She located a Black TP for my bike, and a TP LID Spoiler. She's getting them in, and shipping them directly to Gene in WA. He should have everything by the end of next week. :2vrolijk_21:
Don't know why she didn't go this route in the first place though. :confused5:
Hoist! 8)
Because it's your chit so it can't be easy.
Howie
Is that a black cloud over your head? Again? Still? Good luck with it and I'm sure she'll come out SWEET!
JW
Howie, you da man. How is the softy build comin?
Miker
My bad, I thought it was a softie. The 4spds with original paint are hard to find
Check this site. Adam is painting the TP for me, maybe even done today.
He builds some nasty chops. Check the "smoke out bike", single sided, does not look like it is to comfy but I love the truck tire rear.
http://www.chandleroriginals.com
Peace and Happy Holiday to you and yours.
Miker
More Woo Hoo!!! I'm told my KTP should ship next week from Paint By Gene. Only an original discussion with him about what I wanted. He basically agreed and did my hardbags for me. So I was counting on Gene's talent and judgement to come up with a matching one-of-a-kind paint job for the KTP for my SERK. Hopefully you'll be seeing some new pics soon! :2vrolijk_21:
Hoist! 8)
That is gonna look teets man...Mine is just black, I ain't even put the wiring harness together yet...
I hate it on the bike, too heavy! But it does carry lots of cigars.
Thanks Mike! Agreed on the weight thing. Even though I'm sure the sound system will be greatly enhanced with the HW amp/Polk speakers in the TP, the only times it'll be on is for trips. Gotta have the room for lots of something, huh? ;)
Hoist! 8)
Hadn't even thought of this until just now. The King paks can sometimes be awkward to get over detachable points with the wide Corbin seat anyway. Add to that the amp, speakers, etc and you're creating an even more graceful balancing act. You better teach Binx where to give the extra pair of hands to slide that puppy on and off. And you'll also want to keep an eye on the detachable points. They are wear items in normal use anyway. Watch for cracking.
One other thing, Corbin dual tour seats don't fit with tour paks unless the tour pak is mounted as far back on the detachable rack as it can be (there are two sets of holes). It won't fit at all if mounted in the forward position.
Also, Corbin offers two variants of the dual tour seat. One for use with tour paks and one for use without. Since the two projects weren't joined at the hip did you specifically order the dual tour for use with tour pak?
Its looking good Howie. :2vrolijk_21:
Can't wait to see the finished product at Ribfest. :bananarock:
Thanks Travis. Based on Don's last post here, let's hope it even works now :nixweiss: :nixweiss: :nixweiss:
Hoist! 8)
No worries. Anything can be made to work with the proper amount of drilling, cutting, bending, pushing, squezing, and cursing.
That Don has a way of stirring things up. He sold me a pair of hinges for a tour-pak, and I don't even have a tour-pak. :nixweiss:
I figure I will sell mine to Gary, for a small profit. :devilish:
I figure I will sell mine to Gary, for a small profit. :devilish:
No worries. Anything can be made to work with the proper amount of drilling, cutting, bending, pushing, squezing, and cursing.:ROFLOL: You'll have better luck selling a stock H-D 110ci motor. :P :huepfenlol2:
That Don has a way of stirring things up. He sold me a pair of hinges for a tour-pak, and I don't even have a tour-pak. :nixweiss:
I figure I will sell mine to Gary, for a small profit. :devilish:
I sure hope so! I ordered everything from Jenny all at once. The seat is for a SERK though, which doesn't have a TP. So I guess I'll find out when I get it. I hope I didn't get screwed here!!! :nixweiss: :nixweiss: :nixweiss:
Hoist! 8)
If that's the case I know damn well I don't need these new latches. :o
Travis
Gary's is a basement tour pak.
Hasn't seen the light of day in years.
Been there so long it probably has turned red.
I hear the red ones are fastest!
:nixweiss: :nixweiss: :nixweiss: :nixweiss:
Was too bugged by the possibility. The other touring models offer a dual tour for tour paks, and a dual tour for no tour pak (bigger in the rear of the seat). The Road Kings don't have that distinction though. And nowhere in Corbin's online description in the Road King section does it mention tour paks one way or the other.
I just called them. Was too bummed at not knowing. The sales guy said the Road King seats (including CVO Road King seats) will work with detachable tour paks.
Still worried though. Gene had to mount the speaker pods high enough to clear the saddle. The sales wanker at Corbin had to know what he's talking about. I wish I'd never thought of it....
No worries. Anything can be made to work with the proper amount of drilling, cutting, bending, pushing, squezing, and cursing.
That Don has a way of stirring things up. He sold me a pair of hinges for a tour-pak, and I don't even have a tour-pak. :nixweiss:
I figure I will sell mine to Gary, for a small profit. :devilish:
Screw that. Some Road King didn't show up on my lift last night and I used its hinges on the deck chute of the riding lawn mower!!
:ROFLOL: You'll have better luck selling a stock H-D 110ci motor. :P :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
i have my KTP in the back position and its a bit of work to get it on the bike do to the thickness of the sun-ray seat
oh my..... I don't even want to think about the next day freight cost on a complete tour pak with speakers hung on it. Whatever it is, I know that sometime in the misspent part of my youth I paid less for whole motorcycles. ???
I can't either. It's fully paid for, including normal shipping. This overnight thing is on them. I was surprised myself, and won't be surprised if it doesn't happen. But they really wanted me to have it in York! :2vrolijk_21:
Hoist! 8)
That's cool. Maybe you finally wore 'em down :bananarock: !!
Actually Don, believe it or not, I haven't been bugging em about it. I knew it would be a long process. And I want it to be right, not rushed. So I looked at it like, it'll get here when it gets here! Now it's close. Of course now I want it yesterday. I didn't ask them to overnight it. They emailed me and told me that's what they plan to do. We shall see. Like we've learned here many times the last coupla weeks, it is what it is!!! ;)
Hoist! 8)
Oh well, just got the word, you will not be seeing my TP in York. It'll now go out tomorrow or Fri. You guys will have to wait til KY, Adirondacks, Sturgis, or MV now! ??? ;)
Hoist! 8)
Like you're not going to post pictures.....
That looks great Howie. Very very nice. Glad you're getting that close to getting even more of it together. Can't wait to see it on the bike :2vrolijk_21: .
Outstanding, above and beyond...I guess you are gonna keep that SE TP insert, huh?
Last one. Next time you see it, it'll be on the bike in the Cybil Thread! ;)
Hoist! 8)
Nice TP with the Se insert but it'll be finished with the billet hinges ! 8)
Jacques
Howie,
TP looks AWESOME, glad you finally got it after all these months
Mark
Looks great. Binx will never want to ride without it. When you get the Batwing fairing on no one will be able to tell what model bike you have. It will be Cybil squared!
Nobody would have to know if you got a pop off fairing Howie...I was in the FD closet for years...
Yeah Mike, like there's any chance of that happening around here!!! ::) ;D ;D ;DNobody would do anything like that. :innocent:
Hoist! 8)
Nobody would do anything like that. :innocent:
Accept me and a few of my EBCM bro's and sis'
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Zactly my point. Although don't for a minute think that would stop me. You see what I've endured with my changed mind so far. So a little ribbing over changing my mind over this would be simple stuff. Youze guys don't skeer me!!! :P :D ;)I'll make it even easier on you....
But it ain't happening anyway. No desire whatsoever. D00d will have Chrome Billet Hinges way before I ever get a Fairing! :o ::) ;D ;)
Hoist! 8)
I'll make it even easier on you....
"D00d will have Chrome Billet Hinges, Chrome Starter, SE Linkage, etc. etc. way before I ever get a Fairing!"
Now just don't you and Don get any evil ideas to press me into buying the above.
:pumpkin:
Ride Safe,
Fired00d
:fireman:
And this is how I have to park my bike to not get contaminated by all those FD's! 8) :DYou sure it wasn't the other way around. They didn't want that "FD Wanna Be" next to the real FD's. :huepfenlol2: :huepfenlol2:
Hoist! 8)
Hey Howie. You have got to be one happy guy. It was serenely worth waiting for. Thanks for inspiration. Kevin
You sure it wasn't the other way around. They didn't want that "FD Wanna Be" next to the real FD's. :huepfenlol2: :huepfenlol2:
:pumpkin:
Ride Safe,
Fired00d
:fireman:
Don't be hate'in !!!!
See d00d, by Kevin's post alone, it appears that you really do have it backwards! ;D ;)Maybe, maybe not?? When I grow up I want to be like this guy..... ;D
Hoist! 8)
"D00d will have Chrome Billet Hinges, Chrome Starter, SE Linkage, etc. etc. way before I ever get a Fairing!"<-- Now THAT is some funny chit !!! :bananarock:
Nobody would have to know if you got a pop off fairing Howie...I was in the FD closet for years...Cant wait till Gene gets mine done!