www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' EagleĀ® Road KingĀ® => Topic started by: scottm2200 on March 11, 2010, 09:24:23 PM

Title: Finned Headbolt Cover Help
Post by: scottm2200 on March 11, 2010, 09:24:23 PM
Does anyone know if Harley ever made a Finned headbolt cover that matches the motor paint on a SERK 105th Ann. ? Got one from dealer in silver but way to light of a color. Any help would be great. If not what is everyone using to cover that spot? Thanks.....
Title: Re: Finned Headbolt Cover Help
Post by: grc on March 11, 2010, 09:50:50 PM

I've only seen those bridges in black or silver, and that's all I see listed in the catalog as well.  I would bet you could get your dealer to order some granite engine touch-up paint so you could paint the silver to match, at least a lot closer than it is now.


Jerry
Title: Re: Finned Headbolt Cover Help
Post by: Boatman on March 11, 2010, 09:59:25 PM
Do as GRC stated and buy the silver bridges and spray with HD Granite paint.  Not an exact match but close enough for most of us.
Title: Re: Finned Headbolt Cover Help
Post by: anglia48 on March 17, 2010, 10:51:20 AM
I'm surprised HD doesn't have a color matched bridge for the 110's. Maybe next century? I've been waiting for 2 years now. Good idea to paint one.
Title: Re: Finned Headbolt Cover Help
Post by: GregKhougaz on March 17, 2010, 12:15:10 PM
Scott, 

       HD only has the Finned Headbolt Bridge Set in silver or black.  My 09 SERG has a granite motor.  Just get some Dupont Duplicolor spray paint.  I'm not sure what color you'll need but it's not hard to match.  To match the granite motor, I painted with standard gray and cleaned off the edges of the fins with a rag before the paint had a chance to dry.  You can see the results here:  SERG AND CVO: VERY GOOD TO ME! NEXT? (http://www.cvoharley.com/smf/index.php?topic=31097.msg560287#msg560287)  Easy project with good result, I think.  Good luck!
Title: Re: Finned Headbolt Cover Help
Post by: Eqcons on March 17, 2010, 02:17:50 PM
Do as GRC stated and buy the silver bridges and spray with HD Granite paint.  Not an exact match but close enough for most of us.

Mine IS an exact match - just as you suggest, done with the HD granite aerosol:

Title: Re: Finned Headbolt Cover Help
Post by: 9 1/2 Beers on March 17, 2010, 02:53:21 PM
Mine IS an exact match - just as you suggest, done with the HD granite aerosol:



 I really like that look, that's what I've been looking for  :2vrolijk_21:

 Way to go

 Marty
Title: Re: Finned Headbolt Cover Help
Post by: Eqcons on March 17, 2010, 03:00:33 PM
I really like that look, that's what I've been looking for  :2vrolijk_21:

 Way to go

 Marty

It's easy to do.  There was some discussion about whether the match was affected by whether you started out with silver or black bridges.  I used silver, but I really doubt that it makes any difference - as I say, perfect match.  ;)

Jim
Title: Re: Finned Headbolt Cover Help
Post by: scottm2200 on March 17, 2010, 07:34:35 PM
Thanks for all the input. I ordered the paint from local HD. Helps that I also work at a bodyshop, painter said np to strip old silver and repaint with spray paint from HD.
Title: Re: Finned Headbolt Cover Help
Post by: Eqcons on March 18, 2010, 05:46:04 AM
Thanks for all the input. I ordered the paint from local HD. Helps that I also work at a bodyshop, painter said np to strip old silver and repaint with spray paint from HD.

Definitely no need to strip the old paint! 

Jim