www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' EagleĀ® Road KingĀ® => Topic started by: cmcarr88 on November 15, 2014, 12:07:24 PM
-
inspired by "Wachuko" .. ;D .. a time line of my mods .....
4-Point Docking Hardware Kit (52300354)
H-D Detachables Sissy Bar Upright (54248-09)
CVO Road Glide Custom Short Passenger Backrest Pad (52300300)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/backrest_zps74926fd2.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/backrest2_zpsd5dc4490.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/backrest1_zpsfea436b0.jpg)
-
removed reflector .....
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/tag_zpsc4e96a5c.jpg)
-
inspired by "Wachuko" .. ;D .. a time line of my mods .....
4-Point Docking Hardware Kit (52300354)
H-D Detachables Sissy Bar Upright (54248-09)
CVO Road Glide Custom Short Passenger Backrest Pad (52300300)
Looking good :2vrolijk_21:
-
Looks good, backrest a possible mod for next year! Thanks for posting.
-
Looks like you have the 4 docking bracket in black. That wasn't available last year, so must ne new?
-
Looks like you have the 4 docking bracket in black. That wasn't available last year, so must ne new?
yes it's new ..... http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1 (http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1)
-
usually the first mod I do on any bike ..... just now thinking about it tho .... removing the reflectors
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/mod_zpsa942e128.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/mod2_zps3bf7253e.jpg)
-
speaking of reflectors ..... those Fugly tag reflectors HAD to go .....
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/tag2_zpsf457684a.jpg)
-
last addition .....
Gloss Black Rear Saddlebag Guards (90200788)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/bagbars_zps7ed93bc0.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/bag4_zpsc8a72e95.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/bag3_zpsd12ee38c.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/bag1_zps192c2b9b.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/bag_zps2d412c13.jpg)
for today .....
-
yes it's new ..... http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1 (http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1)
Thanks! I think I will add it to mine as well.
-
going to be a long week ..... :orange:
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/busy_zpsffd906c3.jpg)
-
going to be a long week ..... :orange:
(http://i1281.photobucket.com/albums/a518/cmcarr88/FLHRSE6/busy_zpsffd906c3.jpg)
Mine should also arrive soon.. :)
-
Power core 2" with s&s power dual collectors.
Works find but a bit too loud for me....
-
Everything looks great! I have the same bike.... I was "lucky" (or stupid depending on your point of view) and I was able to get everything I wanted rolled into the purchase. I got the Airwing passenger backrest for the wife...she says she doesnt like it as much as the "old" one (2010 Road King). I like that the Road Glide seat matches....will probably switch it out. I got the saddlebag guards too...I was surprised they didnt have those on the bike. I got GPS installed as well, but if I had a chance to do it over I would have just gone with the Garmin 660. The Sirius SUCKS on the bike.
-
Personally , one of the things I like is no saddle bag guards. I always liked the Street Glide because it didn't have them. I was going to buy a standard RK, but costed to have the guards removed. My wife is short, so the guards always rested on the back of her legs. Each to their own :)
-
Personally , one of the things I like is no saddle bag guards. I always liked the Street Glide because it didn't have them. I was going to buy a standard RK, but costed to have the guards removed. My wife is short, so the guards always rested on the back of her legs. Each to their own :)
I am with you, I do not like bag guards. In fact on my 2015 CVO Road Glide Ultra I removed them one week after I got the bike. I sued the bag supports from my wifes new Road Glide special and put the bag guards on it as she insits on having them. I am glad my King does not have them.
-
yes it's new ..... http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1 (http://www.harley-davidson.com/store/4-point-docking-hardware-kit-pa-01-52300354--1)
In person, does the black docking hardware really look better? I was thinking that the chrome might blend in better than the orange. Am I wrong?
-
I like the chrome one on my orange SERK but I did already have the chrome rack and backrest from my last RK.
Sent from my iPhone using Tapatalk
-
I've got the chrome 4 pt with black rack, looks fine on my green bike
-
I have the black which I prefer but that's just what it is; a preference. I also changed the chrome saddlebag latches to black which ties in very well with or without the docking hardware.
-
I have the black which I prefer but that's just what it is; a preference. I also changed the chrome saddlebag latches to black which ties in very well with or without the docking hardware.
Would you happen to have a photo of the black latches and docking hardware?
-
In person, does the black docking hardware really look better? I was thinking that the chrome might blend in better than the orange. Am I wrong?
as db252 said .... it's really a preference thing .... I like the black better and I'm also planning to change to the black latches ..... just haven't gotten that far with the holidays and all .....
-
Would you happen to have a photo of the black latches and docking hardware?
I really don't have a good pic of that but I will take one when I get home this Monday and post it up.
-
I really don't have a good pic of that but I will take one when I get home this Monday and post it up.
Thank you, I really would appreciate that. I am on the fence about doing the same mods. Most of the pictures posted are close ups and don't give the overall look of these mods.
-
as db252 said .... it's really a preference thing .... I like the black better and I'm also planning to change to the black latches ..... just haven't gotten that far with the holidays and all .....
$80 for two latches that you don't really see.... hmm... tough pill to swallow.... You might be better to put that money into something with more impact?
-
Thank you, I really would appreciate that. I am on the fence about doing the same mods. Most of the pictures posted are close ups and don't give the overall look of these mods.
Here are some pics. Tried to get a scale of how much black is on the bike that makes those tie in so well. As you can see I also have the black Paul Yaffe plate which also brings the black all together. My wife and I commented on the latches being chrome frequently and how it didn't look right and if she notices and says they should be black, they will be black. It's a little thing but it's always is a little thing. I think that you if you have the chrome quick attach mounting kit and chrome sissy bar the latches come together better but not with the black; imo.
(http://i36.photobucket.com/albums/e23/db252/IMG_1449.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1449.jpg.html)
(http://i36.photobucket.com/albums/e23/db252/IMG_1452.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1452.jpg.html)
(http://i36.photobucket.com/albums/e23/db252/IMG_1450.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1450.jpg.html)
(http://i36.photobucket.com/albums/e23/db252/IMG_1451.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1451.jpg.html)
-
Thank you very much for taking these photos. The black does look very nice. These bikes are a little tough to choose accessories for because of the chrome and black accents. For instance, I went with black pipes after much debate and love the look of them.(chrome would look nice as well) Thanks again for the photos.
-
The Paul Yaffe plate looks great!
Why do the tell you they work for the 13 but not the 14?
Did you have them powder coated black or did they can come in black?
Was it tough to see install?
-
The Paul Yaffe plate looks great!
Why do the tell you they work for the 13 but not the 14?
Did you have them powder coated black or did they can come in black?
Was it tough to see install?
I had the exact same question. Did you need to drill holes or any modifications to make the frame fit the bike?? Strange that they would say it DOES NOT fit 2014-2015 models. So many pictures of bikes with them. Thanks much for clarifying.
-
The Paul Yaffe plate looks great!
Why do the tell you they work for the 13 but not the 14?
Did you have them powder coated black or did they can come in black?
Was it tough to see install?
I had the exact same question. Did you need to drill holes or any modifications to make the frame fit the bike?? Strange that they would say it DOES NOT fit 2014-2015 models. So many pictures of bikes with them. Thanks much for clarifying.
I wondered why they wouldn't fit the 14's as well but I think that's them just not updating there website as I emailed them and was told it would. Our 'fender' hasn't changed since 09. They do come in black and that is obviously what I got. It comes with a connector that goes right into the other stock connector but I did have to reverse the wires for the light to work which was no biggie. There is NO modification to the fender necessary at all....works as is. I did add some neoprene washers between the threaded mounts on the plate that go against the fender just for paint protection. Here is our fender without the plate on and the Yaffe plate on.
(http://i36.photobucket.com/albums/e23/db252/IMG_1343.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1343.jpg.html)
(http://i36.photobucket.com/albums/e23/db252/IMG_1344.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1344.jpg.html)
Here you can see the LEDs in the plate on.
(http://i36.photobucket.com/albums/e23/db252/IMG_1461.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1461.jpg.html)
-
Awesome looking! I have placed my order for the Stealth too and can't wait to get rid of that ugly OEM look.
I am still sincerely hoping that someone comes up with black lenses for the taillights. I believe that would clean up the rear and flow very nicely with the black we have on our bikes. The 2013 and earlier models had black lenses too! So far, I have not found any vendor offering them for the new design...
-
I wondered why they wouldn't fit the 14's as well but I think that's them just not updating there website as I emailed them and was told it would. Our 'fender' hasn't changed since 09. They do come in black and that is obviously what I got. It comes with a connector that goes right into the other stock connector but I did have to reverse the wires for the light to work which was no biggie. There is NO modification to the fender necessary at all....works as is. I did add some neoprene washers between the threaded mounts on the plate that go against the fender just for paint protection. Here is our fender without the plate on and the Yaffe plate on.
(http://i36.photobucket.com/albums/e23/db252/IMG_1343.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1343.jpg.html)
(http://i36.photobucket.com/albums/e23/db252/IMG_1344.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1344.jpg.html)
Here you can see the LEDs in the plate on.
(http://i36.photobucket.com/albums/e23/db252/IMG_1461.jpg) (http://s36.photobucket.com/user/db252/media/IMG_1461.jpg.html)
MUST...... HAVE..... THIS!!!! :D
-
Awesome looking! I have placed my order for the Stealth too and can't wait to get rid of that ugly OEM look.
I am still sincerely hoping that someone comes up with black lenses for the taillights. I believe that would clean up the rear and flow very nicely with the black we have on our bikes. The 2013 and earlier models had black lenses too! So far, I have not found any vendor offering them for the new design...
I was really shocked (especially with the black chassis, etc.) that Harley didn't offer smoke lenses for the CVO! Even more disappointing that the front turn signals are not the LED units.....and they don't have them for it either! My dealer said they could "rig" LED's but I would have to buy two sets so they could make it work. Uhm... no. I wrote customer service to see if they had planned on releasing the LED units and the response was "We cannot give information on future products"... LOLZ.
Oh well... still a bad ass motha fu@&$in bike! I'm saying but I aint sayin.... :orange:
-
ma mods :-*
-
:apple:
-
:pineapple:
-
Very nice. Is it quick detachable?
Sent from my iPhone using Tapatalk
-
yes, very quick, so i use the locking detachables latch kit 90300086
-
ma mods :-*
Sweet look with the tour pack :2vrolijk_21:
I just saw your license plate and used to live less than 30min away from there. In fact, I am visiting the area right now and just thought what a gorgeous day it is for a nice ride! Hope you're out there taking advantage of it...
-
Awesome tourpak...is that the chopped version? Looks almost like the razor...very sleek.
-
It' s the chopped tourpak :) ;)
53000459 LUGGAGE RACK,TOUR-PAK, BLK
52300335 CHOPPED T-PAK PAD,FLHRSE
53000402DUG CHOPPED T-PAK, SOLID TITANIUM
90300030 T-PAK LOCK KIT (REQ KEYCODE)
90300047 LOCKING LATCH,DETACH'BL/2-PAK
a pic here is a photo of the current tour
-
Many thanks for the info...I am going to order mine next week. Going with the chopped too!
-
It' s the chopped tourpak :) ;)
53000459 LUGGAGE RACK,TOUR-PAK, BLK
52300335 CHOPPED T-PAK PAD,FLHRSE
53000402DUG CHOPPED T-PAK, SOLID TITANIUM
90300030 T-PAK LOCK KIT (REQ KEYCODE)
90300047 LOCKING LATCH,DETACH'BL/2-PAK
a pic here is a photo of the current tour
What was the total cost ..... if you don't mind me asking ..... and how long did the color matching take? ..... thanks in advance
-
picture says two things .....
1 ..... it sounds like a Harley should .....
2 ..... a VERY satisfied FullSac coustmer !!!..
SS DX pipe w/ 2.25 cores finally installed .....
-
been BUSY .....
added the floor board extensions, bagger nation heel shift adapter, new shifter linkage and changed out the horn cover ..... also added the bagger nation stealth CVO license plate holder (not pictured)
Plus road 150 miles today ..... :huepfenjump3:
-
little additions over the weekend .....
VtwinGoodies Footboard Extender Kit ..... http://vtwingoodies.com/pages/12fl_cvo.html
and H-D Extended Reach Rider Footboard Pans ..... http://www.harley-davidson.com/store/extended-reach-rider-footboard-pans-pa-07-5414510--1
*NOTE* ..... make sure you get the Swept wing shape (54145-10) if you want to use the same inserts and ...NOT... the Traditional Shape (50409-04) ..... I made the mistake of not paying attention and had to reorder them to get the swept wing pans ..... :-[
before (left).....
(http://i1281.photobucket.com/albums/a518/cmcarr88/before_zps5fmtsfcj.jpg)
after (left).....
(http://i1281.photobucket.com/albums/a518/cmcarr88/before1_zpsod3qxejt.jpg)
after (right).....
(http://i1281.photobucket.com/albums/a518/cmcarr88/before2_zpstr3ltgyv.png)
-
I've had to dodge rain drops but got a few pics .....
BTW ..... had the blinkers moved from the bars down .....
Carlini 14" Gangster Apes ..... http://www.carlinidesign.com/Handlebars/Ape-Hangers/Gangster-Ape/Gangster-Ape-1-25-14-Stepped-Black-Throttle-By-Wire.html
H-D Custom Touring Bullet Front Turn Signal Kit (67800167) ..... http://www.harley-davidson.com/store/bullet-front-turn-signal-kit
(http://i1281.photobucket.com/albums/a518/cmcarr88/bars_zps8nmdwniv.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/bars4_zps1vbng8if.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/bars1_zpsng5gkzev.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/bars7_zpsiwgmhydn.jpg)
(http://i1281.photobucket.com/albums/a518/cmcarr88/bars6_zpssnab06gf.jpg)
-
Apes look killer! :2vrolijk_21: I am going to add them after the riding season.
The turn signal relo kit doesn't list our bikes as fitment. Did you have to modify the kit to get it to work?
-
Apes look killer! :2vrolijk_21: I am going to add them after the riding season.
The turn signal relo kit doesn't list our bikes as fitment. Did you have to modify the kit to get it to work?
the kit fits/works ..... only mod you have to do is if you want the wires hidden ..... do a forum search and you'll see some wrapped the wires around ..... I didn't like that look so I drilled a hole and put a grommet in and noticed the windshield brackets so the wires are totally hidden . ..... I'll try to get a better pic of it and post for you if you'd like .....
-
picking her up from the tuner ..... :cucumber:
FullSac SS DX with 2.25 cores & screens ..... and ..... DynoJet PowerVision
-
Looks good!
-
back at it today .....
before .....
(http://i1281.photobucket.com/albums/a518/cmcarr88/Mobile%20Uploads/image_zps3qqmslcu.jpg)
after .....
(http://i1281.photobucket.com/albums/a518/cmcarr88/Mobile%20Uploads/image_zpsfmtlnmtt.jpg)
-
Brother, you almost make me want one!
Beautiful!
-
Those latch inserts are awesome, if I may ask, where did you get them? Thanks!
-
I too would like to know where you got those latch inserts. Very nice.
-
I found them on Facebook ..... Legacy Baggers ..... look him up ..... he does some great stuff ..... :2vrolijk_21:
-
Thanks, I will look him up.
-
the kit fits/works ..... only mod you have to do is if you want the wires hidden ..... do a forum search and you'll see some wrapped the wires around ..... I didn't like that look so I drilled a hole and put a grommet in and noticed the windshield brackets so the wires are totally hidden . ..... I'll try to get a better pic of it and post for you if you'd like .....
I know this is an old thread but thought I'd try...cmcarr88....if you still have a picture of your hidden grommets I would like to see them. Actually adding the same bars 16" and kit on the same bike (mine's green) for turn signals. I have been looking everywhere for a photo, cause I wanted to show to dealer for install coming up soon.
Thanks!
-
:apple:
Man I would hate to get stung by that thing :o