Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ghost Rider]

Looks exactly like my 07 RG did before I put the Corbin on it. Don't know what's up. Last year it was paint, maybe this year it's seats. Seems like every year the MoCo has something they eff up but good. [highlight]I blame the bean counters.[/highlight] I am sure they bid out contracts for various parts every year or two at most and probably go with the low bidder. IMO

B B

Hey, as an accountant I take great offense to that remark!  I have never told the MoCo to shortcut their quality to save a buck.  That desision comes from higher up.  Besides, we accountants are way too busy each day surfing the net and posting on message boards to dirty our hands with that kind of work.    LOL

Later,
Ghost

[SPIDERMAN]

Hey, as an accountant I take great offense to that remark!  I have never told the MoCo to shortcut their quality to save a buck.  That desision comes from higher up.  Besides, we accountants are way too busy each day surfing the net and posting on message boards to dirty our hands with that kind of work.    LOL

Later,
Ghost

Ghost,
         Actually you are part of one of my favorite fantasies. I've always dreamed of being so rich I had to hire someone to count my money.  

B B

[Ghost Rider]

Ghost,
         Actually you are part of one of my favorite fantasies. I've always dreamed of being so rich I had to hire someone to count my money.  

B B

It sounds like from your posts on other threads (8 bikes in 7 years I think), you do have someone counting your money for you.  Dare I say your local H-D dealer!  

[RJ749]

I don't think it's a seat problem.  Took it off and re-mounted it.  Front post goes in the slot and the rear bracket lines up with the bolt, doesn't get much simpler than that.  I'll take it by the dealership and see if they can move the console back or something.

By the way, [highlight]I was a little concerned by how easy it was to remove the saddlebags[/highlight].  Probably need to invest in the saddle bag locks.

dereck, check out this thread for ideas on stolen bags.  http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1164425981/0

[Ghost Rider]

dereck,

I double checked my bike this weekend, and I do have what looks like the same amount of "gap" between the front of the tank, and the rubber on the console.  And, although I never really noticed it before, there is a small gap between the seat and the console.

I don't know if that makes you feel any better, or makes me feel worse, but that is how things are.

Later,
Ghost

[dereck]

Ghost,
I'm taking it in on Saturday for the SERT and V&H slip ons and will ask them to take a look at the console.  More to follow.

[harleyteam]

dereck,

I double checked my bike this weekend, and I do have what looks like the same amount of "gap" between the front of the tank, and the rubber on the console.  And, although I never really noticed it before, there is a small gap between the seat and the console.

I don't know if that makes you feel any better, or makes me feel worse, but that is how things are.

Later,
Ghost

same here, little gap,, never noticed  till I sat on it.

[dereck]

I took it in for the 1,000 service and they didn't fix the gap.

Then I found the SERK3 service manual supplement.  I took off the console with a 1/2" wrench and 4mm hex.  On the underside, the wiring is held in place by some clamps.  I loosened the clamps with a T25 Torx, pulled the wiring harness through about 3/4".  Then I replaced the console.  The gap wasn't eliminated, but its much better than before.

[Raskul]

I think it really stinks you had to do that yourself.  It seems the dealership could have at least tried to help you out and find/do that themselves. 

[dereck]

Right, I'm changing service departments.  I tried to give them the benefit of the doubt, but now I've caught them on three different occasions telling me something that isn't exactly true.

I know there aren't a lot of CVOs out there, but if they aren't sure about something they should at least look it up before blowing smoke.   

[bobby0]

Had no gap when I first read this thread. Since then a gap has developed. I noticed it after taking speedbumps to fast. I'm around 245 lbs. My feeling is that the seat frame itself is bending downward creating the gap.

[skreminegul07]

Had no gap when I first read this thread. Since then a gap has developed. I noticed it after taking speedbumps to fast. I'm around 245 lbs. My feeling is that the seat frame itself is bending downward creating the gap.

Not the genuine PVC plastic seat pan?  That's what is happening, mine is incredibly loose.  I'll bend the front tab to tighten it up. 

[rlavigna]

I have no gap on mine.  If I did I would be pissed and make them get me a new seat.  The dealer can warranty that as a bad fit/finish item.  Rich

[SPIDERMAN]

It sounds like from your posts on other threads (8 bikes in 7 years I think), you do have someone counting your money for you.  Dare I say your local H-D dealer!  

You sound like Beags   

Hey I've had the same woman for 30 years, I indulge my slutty side by being totally unfaithful to my motorcycles.

B B

[Ghost Rider]

You sound like Beags   

Hey I've had the same woman for 30 years, I indulge my slutty side by being totally unfaithful to my motorcycles.

B B

30 years.      Thats awesome.  I've been with my wife for 25 years (20 of it in Wedded bliss) and she still manages to pull sh** that just leaves me shaking my head saying, "I never saw that one coming."     Thats why I love my Harleys, I know exactly what I am getting into with them.  I don't have to worry about my bike changing color every couple of months like my wife's hair does.   

Later,
Ghost