Photos are good, but you took the bike a lot further apart than we did, I guess. I unplugged everything but did not remove radio from the fairing or frt bracket, in fact buddy just held the inner fairing asm while I changed the inner bracket then splipped it right back on. He kind of slipped it forward as I guided the wires thru the hole and then just stood there until I had bracket changed (a couple minutes) then slid it back over wires as I feed them thru the hole. That was the reason for no photos, we neither one had a free hand and with him standing there holding the inner fairing I kind of hurried as much as possible.
The posting above worried about stripes lining up, look at your bike now, they don't line up perfectly with original brackets, due to fairing flairing at the rear the optical illusion just does not show a change.