www.CVOHARLEY.com
CVO Technical => Wheels/Tires/Suspension/Brakes => Topic started by: cossack on January 08, 2016, 07:28:42 AM
-
trying to find out if Performance Machine make a 6 piston caliper for my bike?
any ideas/info etc. ?
PM haven't replied to my email as yet about my issue.
Left front, 11.5" rotor, to go on my CVO Springer 2008.
thanks boys
-
No, just a 4 piston, which is a huge improvement over the single piston unit that's on there stock
PM Part# 0053-2916-CH
You'll also need the bolt kit Part #0109-0100-CH
-
thanks HD,
Agree the standard front brake is VERY average.
I'll have a look on Evilbay ( USA ), they're normally a little cheaper than back here in Australia.
-
i reckon the 0053-2916, is the right hand one.
0053-2919 is the left hand one i might need.
No one can still tell me if IT will fit my bike.
-
You need the right hand brake, as it sits reversed (in front of the fork leg) on the springer. I have an 08 in the shop now that I'm doing this change to. Parts will be in Monday and I'll post picks then.
-
http://www.cvoharley.com/smf/index.php?topic=75084.msg1032784#msg1032784
Older thread from me on the exact same subject , nearly 3 years ago !
I've just "got used" to the old Evo caliper on the front of mine , albeit with Lyndall LRB 7059 GOLD+ pads
My CVO Breakout has the 4 piston Brembo clone caliper AND stock OEM ABS. Never gunna match that on a Springer CVO sadly !!
-
:oops: :oops: :oops: :oops:
thanks HD, this dumb arse totally forgot about reversing the caliper, even after posting a fckn photo.......
-
Here's a pic of the 4-piston unit on an 08 FXST
-
thanks mate,
PM sent
-
finally bought one from ridersdiscount from the states.
will post pictures when fitted etc.
Now for the fournales front shock, to go with the Shotguns, already fitted.