Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Wayne G]

Assembled with plate and sticker

[DavidG]

Sorry to hear about another plate biting the dust. I went through the same thing. I will say I get a lot of comments on how cool it is. I just hope it stays on the bike. One thing I noticed though. The first one I received had a "Made in Taiwan" sticker on it (box). The replacements (2) had a spot on the box where a sticker had been removed and no "Made in Taiwan". Go figure.

[ruiner73]

ah..nice, finally a pic of a chrome one in real life, thanks! Can't wait to see one mounted on the bike. One quick question, is that black foam/rubber square the only thing between the back of the plate & the fender?

[mjb765]

ah..nice, finally a pic of a chrome one in real life, thanks! Can't wait to see one mounted on the bike. One quick question, is that black foam/rubber square the only thing between the back of the plate & the fender?

I called Yaffe about that foam and I was told on the SESG I did not have to use it. I removed it and the frame does not contact then fender when itstalled. It's close...but it does not touch. So I left it out.

[Wayne G]

The welded nuts hold the frame off the fender. I am having the nuts tig welded today,  I will post aLL the pictures as soon as its mounted.

Question   how do you attach multiple pics to a single post?

[Fired00d]

The welded nuts hold the frame off the fender. I am having the nuts tig welded today,  I will post aLL the pictures as soon as its mounted.

Question   how do you attach multiple pics to a single post?

You can only attach one file/picture per post. Those posts you see w/multiple pictures are not attached to the post they are embedded in the post from somewhere else on the internet.

 
Ride Safe,
Fired00d
 

[DavidG]

You can use a photo editing program to post multiple pics. Technically its still only one jpg per post but you can make a single jpg file from multiple photos in programs like Photoshop.

[Wayne G]

Finally got the Stealth mounted. Took some thinking and some fabrication but I was able to use the stock backing plate and harness cover. I am very pleased with the way it came out. I had the backing plate nuts tig welded to make sure it wont break off. I dont mind the night time light look, as I see it, I dont Ha Ha  I know a bad attempt at humor!

[Wayne G]

 Looking down, gap at the top

[Wayne G]

Side

[Wayne G]

Underneath inside fender without harness cover

[Wayne G]

Cover installed

[Wayne G]

I used plastic washers between the backing plate and the bike. I just couldnt mount the metal against the paint    (Nails scratching on a chaulk board)   I also used a black plastic plug in the wiring hole and poked a hole in it to run the wiring........35 years of gearheading is hard to shake!

[Wayne G]

Night lighting

[ruiner73]

Great pics! Looks good & good ideas with the washers & stock cover on the back...