www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Fat Boy® => Topic started by: tunedse2 on January 09, 2006, 03:32:11 PM

Title: tag bracket
Post by: tunedse2 on January 09, 2006, 03:32:11 PM

Is the tag bracket on an 06' removeable? And If so what part# do you plug
the bolt holes with.

Title: Re:  tag bracket
Post by: AUSSIE_FLSTFSE on January 10, 2006, 04:14:43 AM

What do you intend to do with your tag?
cheers
 [smiley=drink.gif]

Title: Re:  tag bracket
Post by: AUSSIE_FLSTFSE on January 10, 2006, 04:16:30 AM

I removed mine on the 05, but refitted a layback bracket!

cheers
 [smiley=drink.gif]

Title: Re:  tag bracket
Post by: tunedse2 on January 10, 2006, 08:15:31 AM

I was going to put it on the side- on the swingarm...

Title: Re:  tag bracket
Post by: fatboyse2 on January 10, 2006, 06:18:38 PM

There are a few options for pluging the holes if you move your plate somewhere else, though you will still have 3 dots there to deal with.  There are chrome semi flush plugs that will clip into the hole and look reasonable.  I used these to cover the upper support mounts for my stock pipes when I put on a Thunderheader (uses the standard lower mounting holes).

I saw this cool LED turn signal kit which replaces the side mounted rear turn signals with an LED license plate mounted bracket which places the turn signals as an LED arrow > on either side of a laydown license plate frame.  They are independent so they could be mounted closer together if you removed the plate.  You may need to make or find a cover (or HD skull medalion might do) to cover the mounting kit.  Wish I took a picture of this.

Title: Re:
Post by: sefatboyscott on January 19, 2006, 09:58:41 PM

 [smiley=worthless.gif]how bout one or two? O have a Kuryukun Panacea taillight with intergrated turns, I removed my rears completely and legally.