www.CVOHARLEY.com
CVO Technical => Intake/Exhaust/ECM => Topic started by: longlast on August 11, 2018, 08:10:14 PM
-
No issues with the with the pipes but for sometime I've been trying to identify what type of V&H muffler they are.
What I do know is that they are oval slip-one's but what mobile.
V&H also have these ovals
Oval W/Duals, Slash Cut Slip-on's, Slash Cut Slip-on's W/Duels , Oval Slip-on's,
They where on the bike when I got it. I've been also trying to get in touch with V&H to ask them too identify what model they are but haven't been able to find a home page with a contact.
Anyone with information on this would be a big help.
If you expand the pic you can see the pipe better .
-
Those look a lot like Monster Ovals to me, but I've bee wrong plenty of times :huepfenlol2:
I did find this contact info on their site:
CALIFORNIA LOCATION
13861 Rosecrans Ave.
Santa Fe Springs, CA 90670
Business Hours: 8am-5pm PST
Phone: (800) 592-2529
Fax: (562) 802-0110
And an email for general inquiries : info@vanceandhines.com
Good liuck
-
Don’t know the model number but those are the older model ovals (no longer in production) I had a set on my bike before I switched to the Eliminator 400’s. They sounded and performed great but I just wanted a different look and sound. I sold them to a buddy who loves them and they work very well with his 95”
-
Twin Slash Ovals????
-
I'm also thinking Twin Slash ovals. I had a set of Monster Ovals on my '08, and they did not have the inner piece that sticks out from the outer piece.
-
Took this better pic today . Sent an e-mail with this pic to V&H today if they get back I'll post what they say.
-
I'm also thinking Twin Slash ovals. I had a set of Monster Ovals on my '08, and they did not have the inner piece that sticks out from the outer piece.
If they are twin slash then the V&H fuelpak numbers are wrong. The numbers on the fuelpak map correspond with just oval Slip-on's
I've seen the fuelpak mapping for Twin Slash Ovals and the numbers are way different
-
See attached link: Vance & Hines 16727 “Oval Dresser Slip-on”.
http://vanceandhines.com/download/D400IN.pdf
-
See attached link: Vance & Hines 16727 “Oval Dresser Slip-on”.
http://vanceandhines.com/download/D400IN.pdf
That's the ones :2vrolijk_21:
Cheers SIKBIRD I'll have one for you or two or three :drink: for that.
I checked my fuelpak mapping and it is set up to the part number 16727
That one more off the check list of unknowns for my bike
-
That's the ones :2vrolijk_21:
Cheers SIKBIRD I'll have one for you or two or three :drink: for that.
I checked my fuelpak mapping and it is set up to the part number 16727
That one more off the check list of unknowns for my bike
Happy to help!