www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Custom® => Topic started by: SDCVO on August 26, 2018, 12:27:37 AM
-
Looking to xfer over the LED foglights and highway pegs to the 19 Roadglide but worried it will look horrible and to busy on the smaller engine guard. Has anyone done that (or either) that can post some pics? Even thought of maybe just doing the foglights and going with the Ciro highway pegs that attach under the floorboards but not sure they will fit with the larger boards of the RG. I really don't want to give up either one as I constantly use the highway pegs and live in the boonies and need that extra light down low getting through the pitch black twisties at night on the way home.
Hoping someone has already done it on a 18 RG and it looks ok!
-
Maybe you could look at Motolights?
https://motolight.com/product/light-set-caliper-mount/
-
Maybe you could look at Motolights?
https://motolight.com/product/light-set-caliper-mount/
My problem is I already have both the HD LED Foglights and highway pegs and Harley has agreed to install on new bike. Obviously installing pegs no issue but running the wires through the crash bars is a task but don't want to have them do it just because they committed to it and then not have it look right. Why I am hoping someone has done it and looks ok.
-
I put the Ciro pegs on they hit running board and the road glide is an inch lower! So if you ride aggressively be careful there is no give at all ! So I did not use them a little to low for my liking! Good luck!
Sent from my iPhone using Tapatalk
-
I put the Ciro pegs on they hit running board and the road glide is an inch lower! So if you ride aggressively be careful there is no give at all ! So I did not use them a little to low for my liking! Good luck!
Sent from my iPhone using Tapatalk
I was thinking about them so thats really good info, thanks!