www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Custom® => Topic started by: Fire-Medic on May 02, 2012, 12:36:32 AM
-
I was curious if anyone knows who makes the black braided clutch and upper brake line that comes stock on the '12 CVO RGC's? I am getting close to getting a new set of bars, but can't find anyone who has lines that match what comes on the bike?
I have emailed a few people (vendors) and no dice. My dealer is not sure if they can get me HD lines that match but are longer.......?
Thanks
FM
-
I think HD makes them longer or some one makes one that matches. I know a guy who had the local dealer put 14" apes on his brown CVO glide and they had to do longer lines. If I remember right it looked just like stock cables.
I just sent the Local HD dealer service manager and e-mail about it as they did the work on the other CVO with the apes.
-
I think HD makes them longer or some one makes one that matches. I know a guy who had the local dealer put 14" apes on his brown CVO glide and they had to do longer lines. If I remember right it looked just like stock cables.
I just sent the Local HD dealer service manager and e-mail about it as they did the work on the other CVO with the apes.
Dave thank you so much this will be helpful. I am debating between 12 and 14 inch bars but want to find lines that match. I know some might see this as ridiculous, but it would drive me crazy if the lines don't match.......
-
Sounds reasonable to me.
-
So I have a vendor telling me the only black stainless lines they can get are from Magnum Shielding and that I would need to replace all of the brake lines because the upper magnum brake line to the abs box, will not work with stock lines for mid and lower.....
Has anyone heard of this?
-
BS! You can change only the tops, but I don't think they will match the stock lower lines. Cosmetically, the Magnum are nicer looking.
-
So I have a vendor telling me the only black stainless lines they can get are from Magnum Shielding and that I would need to replace all of the brake lines because the upper magnum brake line to the abs box, will not work with stock lines for mid and lower.....
Has anyone heard of this?
Not true...buddy with 14" apes on his 2012 CVO Road Glide just had to change the clutch and top brake line only and was able to use the stock lines from the ABS module and the lowers. However, they don't match "exactly"...not a big deal to him but if you are one of those "detailed" type of individual (I'm guilty), it would drive me nuts!
-
My dealer is telling me Burley makes black braided cables that are a close match to stock, that is what they have used on two other CVOs with 14 apes.
-
Well I got a sample from Magnum on their Black Pearl lines, and it's completely different than the stock lines, but looks fantastic IMO, tries to photograph but not coming out good in the picks, nice dar black weave pattern and clear tubing over it.
Was told by a vendor that the upper line for Magnum is 2 piece and not 1 piece and that's why if I went with their setup could not just swap the upper line.
Still haven't decided on handlebars though......
-
yes, the upper is 2 piece (personally didn't like that), still don't see what that has to do with swaping the lower line?
-
yes, the upper is 2 piece (personally didn't like that), still don't see what that has to do with swaping the lower line?
Nothing except that the magnum stuff doesn't match my stock stuff........
-
oh, yes that is true, I do not see any compatability issues though. The one thing I didn't like when I ran the Magnum lines on my RG was that the connection for the 2 piece upper line was right where the bend was was. The upper portion went from the master cylinder into the fairing, then there was a connector to the piece that went back to the ABS module. The connector was right in the arch in the fairing (hope that makes sense).
-
oh, yes that is true, I do not see any compatability issues though. The one thing I didn't like when I ran the Magnum lines on my RG was that the connection for the 2 piece upper line was right where the bend was was. The upper portion went from the master cylinder into the fairing, then there was a connector to the piece that went back to the ABS module. The connector was right in the arch in the fairing (hope that makes sense).
I have never seen it but I understand what you mean, this is how it was explained to me as well. Magnum says they do it this way because then if you change bars later you only need to replace the first part.......
-
Paul Yaffee tells me "If you want to choose a taller bar we do have install kits in Black Diamond." He also said he runs the 10" on his road glides, one year he did 12" but the following went back to 10" These are the road glides he rides to Sturgis each year. He say his seat is 3 inches lower than stock, he is 6'.
He tells me PYO 10" no cable or wire change needed, the 12" require new lines and wire extenders.
Decisions decisions.
I was shocked when it was Paul who replied to two of my e-mails and talked to me on the phone.
-
Paul Yaffee tells me "If you want to choose a taller bar we do have install kits in Black Diamond." He also said he runs the 10" on his road glides, one year he did 12" but the following went back to 10" These are the road glides he rides to Sturgis each year. He say his seat is 3 inches lower than stock, he is 6'.
He tells me PYO 10" no cable or wire change needed, the 12" require new lines and wire extenders.
Decisions decisions.
I was shocked when it was Paul who replied to two of my e-mails and talked to me on the phone.
Good to know, he's very involved, I found out when I was helping a buddy with his RG last year and he ordered a bunch of stuff and we would call with some questions and he would answer, lol.
-
Well my handlebars shipped from Dr. V-Twin today. Went with the 14" Wild 1 Outlawz in Black, and they're setting me up with a complete ABS brake line kit and Clutch cable from Magnum in Black Pearl. Will be doing the install weekend after this one.
Just got my stealth rack, 4 point docking hardware, sissy bar/pad, and rider backrest buttoned up the last couple of days.
Starting to come together.