Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: anyone e have pics of Foglights and highway pegs on small engine gaurd?  (Read 1587 times)

0 Members and 1 Guest are viewing this topic.

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America

Looking to xfer over the LED foglights and highway pegs to the 19 Roadglide but worried it will look horrible and to busy on the smaller engine guard. Has anyone done that (or either) that can post some pics? Even thought of maybe just doing the foglights and going with the Ciro highway pegs that attach under the floorboards but not sure they will fit with the larger boards of the RG. I really don't want to give up either one as I constantly use the highway pegs and live in the boonies and need that extra light down low getting through the pitch black twisties at night on the way home.
Hoping someone has already done it on a 18 RG and it looks ok!
Logged
Alan

VaEagle

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2553
    • VA


    • CVO1: 06 FLHTCUSE Autumn Haze -SOLD
    • CVO2: 09 FLTRSE3 Orange- sold
    • CVO3: Who knows what?
Re: anyone e have pics of Foglights and highway pegs on small engine gaurd?
« Reply #1 on: August 26, 2018, 10:30:19 AM »

Logged

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: anyone e have pics of Foglights and highway pegs on small engine gaurd?
« Reply #2 on: August 26, 2018, 11:05:47 PM »

Maybe you could look at Motolights?
https://motolight.com/product/light-set-caliper-mount/
My problem is I already have both the HD LED Foglights and highway pegs and Harley has agreed to install on new bike. Obviously installing pegs no issue but running the wires through the crash bars is a task but don't want to have them do it just because they committed to it and then not have it look right. Why I am hoping someone has done it and looks ok.
Logged
Alan

bobbym

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 191
Re: anyone e have pics of Foglights and highway pegs on small engine gaurd?
« Reply #3 on: September 12, 2018, 08:11:23 PM »

I put the Ciro pegs on they hit running board and  the road glide is an inch lower! So if you ride aggressively be careful there is no give at all ! So I did not use them a little to low for my liking!  Good luck!


Sent from my iPhone using Tapatalk
Logged

SDCVO

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2917
  • 19 CVO RG-12 CVO RG
    • CA


    • CVO1: 2019 Mako Shark Roadglide
    • CVO2: 2012 Maple Roadglide
    • CVO3: 2019 BMW K1600 Grand America
Re: anyone e have pics of Foglights and highway pegs on small engine gaurd?
« Reply #4 on: September 12, 2018, 11:52:10 PM »

I put the Ciro pegs on they hit running board and  the road glide is an inch lower! So if you ride aggressively be careful there is no give at all ! So I did not use them a little to low for my liking!  Good luck!


Sent from my iPhone using Tapatalk
I was thinking about them so thats really good info, thanks!
Logged
Alan
 

Page created in 0.118 seconds with 21 queries.