Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Chief]

http://www.bakerdrivetrain.com/cruisedrive/index.htm#dd7

[hard10]

http://www.bakerdrivetrain.com/cruisedrive/index.htm#dd7

"DD7: Direct drive 7-speed transmission
The BAKER DD7 is scheduled to be available august 1, 2008 so reserve yours now!"

Just in time for the '09 line up?

[Fired00d]

"DD7: Direct drive 7-speed transmission
The BAKER DD7 is scheduled to be available august 1, 2008 so reserve yours now!"

Just in time for the '09 line up?

So you going to get one in your '09 SERG (O/B of course)?

 
Ride Safe,
Fired00d
 

[grc]

I'm waiting for the infinite ratio CVT.  If I wanted to spend all day shifting I'd drive a big rig through the mountains.

Jerry

[mr_magoo]

Where will it all end 7 speed tranny's.  No mention of price yet, been looking at an Andrews 30 tooth sprocket because i hate pulling the trailer with that high a first gear.  Might be worth looking at as an option.  The cruise drive tranny doesn't shift that well to me.

[grc]

If you want to see photo's of an install, they have a full write-up in the current American Iron mag.

Jerry

[Twolanerider]

Haven't read a thing on these.  So if info is readily available forgive my laziness here.

Are the top two gears OD?  Or just the top gear?  I they shoehorn six gears between first gear and their comparative equivalent of 1:1 I'm not really sure I want to be shifting that much.

[RedDevil]

I'm going to hold off until Baker comes out with the DD10...8 forward and 2 reverse...now that's a tranny!

    

[hard10]

So you going to get one in your '09 SERG (O/B of course)?

 
Ride Safe,
Fired00d
 

Only problem is they won't give me anything for my '07 as a trade. They told me I'd have to pay them to take it      

Where will it all end 7 speed tranny's...

I don't use the six gears I have.  No need for a seventh.

[RedDevil]

Haven't read a thing on these.  So if info is readily available forgive my laziness here.

Are the top two gears OD?  Or just the top gear?  I they shoehorn six gears between first gear and their comparative equivalent of 1:1 I'm not really sure I want to be shifting that much.

They shortened up 1-6 and 7th is 1.0.  Just one OD still.   Lots more shifting.

 

[Twolanerider]

They shortened up 1-6 and 7th is 1.0.  Just one OD still.   Lots more shifting.

 

Good grief.  Getting cramps in my foot just sitting here thinking about it.

[RedDevil]

Good grief.  Getting cramps in my foot just sitting here thinking about it.

I guess I'm not concerned about "hole-shots", so my first gear works just fine for me.  I don't think it's too tall that I need to shorten the ratios on the first sixth and then add a 7th for overdrive.  Dayum, how many more speeds do we need?   

 

[Serkcus]

Great news, I will sure have to look at these. I have hated the too tall 1st gear and the fact that I need to be going at least 110 ( that's kilometers    ) to even get it comfortably in 6th gear. A lot of my driving means  using fifth gear at around 3K . This new tranney sounds like it will be perfect.

[sportygordy]

I decided to wait for the DD8

[BIGDOG]

I decided to wait for the DD8

I would rethink that ! don't tell any one but I heard a two speed rear end is on it's way so 6 will get you 12 

[9 1/2 Beers]

Great news, I will sure have to look at these. I have hated the too tall 1st gear and the fact that I need to be going at least 110 ( that's kilometers    ) to even get it comfortably in 6th gear. A lot of my driving means  using fifth gear at around 3K . This new tranney sounds like it will be perfect.



not to mention the noise that 5th gear makes

[SPIDERMAN]

Where will it all end 7 speed tranny's.  No mention of price yet, been looking at an Andrews 30 tooth sprocket because i hate pulling the trailer with that high a first gear.  Might be worth looking at as an option.  The cruise drive tranny doesn't shift that well to me.

I'm just guessing, but I believe the idea here is for Baker to produce a trans that does what their famous DD6 does PLUS gives you the overdrive gear you get with H-D and others. Baker's DD6 is a Direct Drive 1/1 final gearing as opposed to H-D's .86/1. The Baker DD6 gives you better pull throughout the 6 gears, but the 6th is not much better than a standard 5-speed for fuel economy and reduced engine speed. Sooooooo, I believe that Baker is trying to give you the best of both worlds. My guess would be you'll never see 7th gear unless you're out on a superslab with 100 miles to the next gas stop.  Just my guess, so if you want to bash this post, feel free. I'm talking out my a$$ mostly - - - - I think 

B B

[BIGDOG]

I'm just guessing, but I believe the idea here is for Baker to produce a trans that does what their famous DD6 does PLUS gives you the overdrive gear you get with H-D and others. Baker's DD6 is a Direct Drive 1/1 final gearing as opposed to H-D's .86/1. The Baker DD6 gives you better pull throughout the 6 gears, but the 6th is not much better than a standard 5-speed for fuel economy and reduced engine speed. Sooooooo, I believe that Baker is trying to give you the best of both worlds. My guess would be you'll never see 7th gear unless you're out on a superslab with 100 miles to the next gas stop.  Just my guess, so if you want to bash this post, feel free. I'm talking out my a$$ mostly - - - - I think 

B B

YA whats NEW. But we like hearing the rumble anyway

[sportygordy]

I would rethink that ! don't tell any one but I heard a two speed rear end is on it's way so 6 will get you 12 

Oh Boy,, then I'm defiantly waiting,, i want 14 

[SPIDERMAN]

I would rethink that ! don't tell any one but I heard a two speed rear end is on it's way so 6 will get you 12 

Honda did something of the sort with an extra gear on a jackshaft making a 5 x 2 ----10 speed on their 900 CB's back in the early 80's

B B

[BIGDOG]

Honda did something of the sort with an extra gear on a jackshaft making a 5 x 2 ----10 speed on their 900 CB's back in the early 80's

B B

I had one and it was a blast for it's time . But as only Honda can do it had the worst seat for any ride over 25 miles. Just another bike in a list of way to many. The pic is from the BIGDOG arcives, It's not the best pic but you get the idea.

[Dan_Lockwood]

I've thought about all the different ways to "fix" the 1st gear launch problems, but clutch basket or drive sprocket, both get you more rpms at the top end. 

I'm happy with my rpms at the cruise speed top end and I don't feel that I'm lugging the bike at all at 70 mph.

Just a lower 1st gear would be a big help and if it means 7 speeds instead of just the 6, so be it.

Anyone have any feedback yet on the use of a Baker DD7?

Thanks.

[Gecko]

I'm waiting for the same report from somebody.   I, too, want to keep the low highway revs but increase the ratio in first and second.  Taking off takes too much clutch slippage or fear it's going to stall, and a comfortable rpm in second is about 5 mph faster than city traffic.  Somebody on here said several months ago they were going to put one in; I guess they never did.  If I go through with my "make it stop sounding like it will blow up at any second" engine rebuild this spring I plan to do the DD7 swap.