Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[aclass]

Understood!  Thanks for the helpful info.
Looks like Ms Claus forgot the gasket between the inner primary and the crankcase so I'm dead in the water until a trip across the mountain to FireDood's part of the State.  Since the bike is internally stock I'll probably save myself the $$ an opt out on the SE unit.

I did notice some pretty strange marks on the piece that slides into the sprocket,  dont think I've notice that before on older bikes I've had apart.

[spydglide]

I did notice some pretty strange marks on the piece that slides into the sprocket,  dont think I've notice that before on older bikes I've had apart.

Hmmmmmm, sometimes (my) imagination is a terrible thing.  spyder

[Hogvet70]

How can we be sure it is on the new CVO bikes. Anyone got the part's list for the 2010 CVO's yet.

I have the (2010 parts list/2010 Service manual touring/2010 Service manual SE). I do not see any parts listed as is indicated in the attachment thread above. I am not a mechanic but the following are not listed in the parts manual.

"The perfect addition to a complete performance upgrade, and complements the installation of the Screamin' Eagle® Performance Clutch Hub P/N 37976-08. (Available September 2008)

 40274-08"

Am I looking at the wrong material?

Gary

[Hogvet70]

Here are the pages from the 2010 Parts manual. I hope this helps.

[Hogvet70]

Sorry pg 2.

[djkak]

I have the (2010 parts list/2010 Service manual touring/2010 Service manual SE). I do not see any parts listed as is indicated in the attachment thread above. I am not a mechanic but the following are not listed in the parts manual.

"The perfect addition to a complete performance upgrade, and complements the installation of the Screamin' Eagle® Performance Clutch Hub P/N 37976-08. (Available September 2008)

 40274-08"

Am I looking at the wrong material?

Gary

Items highlighted on page 3 of the I-Sheet for the 40274-08 SE sprocket are identical to items 16 and 17 on page 2 of your parts book attachment.

[Hogvet70]

Items highlighted on page 3 of the I-Sheet for the 40274-08 SE sprocket are identical to items 16 and 17 on page 2 of your parts book attachment.

Got it! Thanks for clearing that up. Makes me feel better. Gary

[HDDOCFL]

You should feel better, it will cost 09 110" owners $250.00 to upgrade.   Doc

[CVOStreetglide]

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448772595&FOLDER%3C%3Efolder_id=2534374309041056&ASSORTMENT%3C%3East_id=2534374309041056&bmUID=1248786680797&bmLocale=en_US  Looks like all the 2010 CVO 110" gets this new update also besides the Tri Glide.  Doc

Doc

You got my curiosity up. So I looked at the 2010 FLHXSE Parts Catalog p/n 99433-10.

On page 44-45 the Compensator Assembly Index Number 16 is 83935-09.  

It would seem that the 2010's and maybe the 2009's CVO's have a newer version.

I hope it holds up as well as your experience with the SE  Compensator.

Regards

[HDDOCFL]

The 2010 110"  got it, not the 09 110" but the Triglide 09 had it. The major parts from the 08 SE Compensator are are in the 2010 110" motors and Tri glides as stock.   Doc

[djkak]

The Softail Rockers have a comp sprocket design similar to the SE unit. The part numbers for the sprocket and spring-pac are different, but visually it looks the same.

[aclass]

Here is a picture of the "strange" marks on my compensator.

[sadunbar]

Here is a picture of the "strange" marks on my compensator.

Any chance for a better picture?  My first reaction - as best as the current picture can be viewed - is not good....   

[aclass]

Unfortunately that was the best one out of about 6 clicks with this POS camera.  I've already fastened everything up so I cant get a better one.

The marks were red,  both inside the sprocket(only about half the circumference of the surface was marked up) and also on the splined piece. (the spline piece was marked up most all the way around it.   I dont know where they came from or understand it.

[HDDOCFL]

From the picture I see looks like the assembly had no assembly lube on it on fire up. Or low primary oil.   Doc