well i have started my winter project with my cvo
i purchase HPI 55mm throttle body to 58mm intake 1.8
5.3 injectors
Woods TW-8 Cams
SE 10.5 piston set
pro rivera pro clutch with tpp
fueling cam plate and oil pump
S&S roller rockers and lifters, allready have there push rods
cometic .030 head gaskets
Headwork by Hillside cycle
few days ago my Indy started tearing down my motor ..found out @ approx 7,000 miles on bike i have approx 4 thousandth runout on crank and my oil pump housing has alot of scaring
so to make along story short my lower end and my new SE pistons are on the way to Dark Horse they are going to install timkin bearing replace the
rods cause the top end of the cvo rods are tapered and may be a weak leak and my pistons will need some machine work to fit new rods
pro plug crank and balance all necessary stuff
Dyno Tunning will be done by "stroker"