www.CVOHARLEY.com

CVO Technical => Electronic Toys and Gadgets => Topic started by: bpalmersheim on June 04, 2007, 10:18:40 PM

Title: CVO SERK Smart Siren II
Post by: bpalmersheim on June 04, 2007, 10:18:40 PM

This may have been covered before and I apologize for not performing a more thorough search...

I know my 2007 CVO SERK has the HD Factory Security System with Siren, but don't know if it is the Smart Siren or Smart Siren II. 

Anyone know for sure before I run out and buy the upgraded module?  I want the pager functionality like my 02 Dyna Street Bob I had.

Any help would be appreciated.

Title: Re: CVO SERK Smart Siren II
Post by: Coyote. on June 04, 2007, 10:24:14 PM

It is NOT the smart siren II. If you want to add the pager, you'll need to replace the siren module as well.

Title: Re: CVO SERK Smart Siren II
Post by: bpalmersheim on June 04, 2007, 10:28:33 PM

Thanks for the speedy reply.  I will hook up with the dealer and purchase the Smart Siren II module and the pager receiver.

Title: Re: CVO SERK Smart Siren II
Post by: Fired00d on June 04, 2007, 10:31:17 PM

It's a simple install to upgrade to the Siren II (all thumbs mechanic me did it). On my bike it was simply removing side cover, taking to bolts loose on the ECM so you can get to siren behind it, unplugging old siren, installing new one, and running the transmit wire for pager per instructions. You then follow the directions on the pager to mate it to Alarm/Siren and you're good to go.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Title: Re: CVO SERK Smart Siren II
Post by: Coyote. on June 05, 2007, 12:13:39 AM

Take a look at this mod if you have the time. I wrote about this some time back.

http://www.cvoharley.com/smf/index.php?topic=12004.msg186648#msg186648