www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin' Eagle® Deuce® => Topic started by: kobi04sed on September 30, 2006, 03:19:15 PM
-
Just installed the Ness air filter kit and having issues with the tear drop cover hitting the bolt holding the back plate to the front head. Anyone have issues here?? I would like to keep the SE tear drop cover. If I add a 1/8" washer to the cover it holds it away, but the cover is not held firm to the filter rubber. Thoughts?? Thanks, Kurt
-
Thicker gasket between the filter & cover? [smiley=nixweiss.gif] [smiley=xyxthumbs.gif]
-
Kurt,
As SEULTRA suggested, a thicker gasket on the filter along with your 1/8" washer should do the trick. Try some self-stick closed cell foam weatherstripping from a hardware store, approximately 5/16" to 3/8" wide and 1/4" thick. You will need the harder version, not the easily compressed stuff. Just stick the weatherstrip material to the existing gasket.
Jerry