Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: FLHTCUSE troubles  (Read 6883 times)

0 Members and 1 Guest are viewing this topic.

Goretto

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • www.CVOHARLEY.com

FLHTCUSE troubles
« on: January 13, 2019, 09:51:55 AM »

I live in Jakarta, Indonesia and I recently purchased a FLHTCUSE with, wait for it, 9,000 miles on it, although I'm under no illusion that is correct. The bike is stock except for free flow modified original exhaust.

I would like to preface with this: roads in Jakarta are congested to say the least. A lot of traffic jams and intense, humid heat during the day. Roads are in poor conditions with a lot of pot holes and uneven roads. Motorbikes are not allowed on the motorway so we rarely get to ride the bike fast unless we go touring outside of the capital but even then it's still no motorway, just quieter (and beautiful) roads. Maybe we do about 45MPH on average during those times.

First troubles came on the way home when I lost the clutch due to heat in traffic jams. Got the hydraulic fluid changed and so far so good.

Then I started getting troubles like in this video:



When the bike gets hot and I stop somewhere and restart the bike shortly after, the above occurs. Sometimes I can restart in the first try sometimes after the 5th or more time. The last time this occurred was this morning after I had oil coming out of the air cleaner. It was quite a bit of oil, spraying allover the crank case, exhaust, bags and yours truly, with a lot of white smoke when it hit the hot bits (excluding me).

At this stage I felt the engine was very hot to the point where it was uncomfortable on my legs. Stopped the bike for a couple minutes and had some troubles starting again like on the video.

Later that day, I stopped again for a few minutes and had even more troubles starting the bike.

The owner of the garage is a friend and while not a mechanic himself, he's been riding Harleys for a long time and owns several show rooms. He reckons the oil is bad, as in the wrong kind. It's dark and too liquid according to him. It wouldn't surprise me because it looks like the bike got some shoddy work done to it in the past. I will replace the oil this week.

I also have an engine light coming on after starting. So I turn the ignition, flick the on switch, engine light comes on (normal) while the fuel pump does its thing, then I start the bike and the engine light comes back on for a couple seconds then off.

Last week, after facing similar troubles, I ended up with a solid engine light and battery charge light. Took it to the mechanic who showed me a busted rotor. He fixed that along with some electric issues in the fairing as well as a busted front motor mount.

After replacing the mount (Drag Specialties, old style kind), I've noticed some fairly strong vibrations at low rpm. Say, I'm stopping at a stop light, as soon as the needle crosses down the 2k mark, I feel those vibrations through he fairing, crotch and floor boards.

Next, I feel that from 3rd to 4th gear, I don't get much engine pull at all. Feel very sluggish, like I tist the throttle but the bike hardly pushes.

There is also this noise that I can clearly hear from the air cleaner, a kind of "knocking" sound on rhythm with the engine although I feel this is the cooling system kicking due to heat. I tried to look around for something lose, even the push rod covers, air cleaner, etc. Nothing that I can see externally.

Oh and I also had an error code for idling problems. I can't remember exactly, something about irregular idle.

So to sum up:
- hard start when hot with smoke coming out of the air cleaner
- oil coming out of air cleaner when bike is very hot
- engine light coming on for a couple seconds after engine start
- knocking sound coming from air cleaner (that's where I hear it lost but feels like the sound is inside the engine and coming out through the air cleaner)
- low pull in 3rd and 4th gear (haven't event had the chance to go to 5th geary yet).
- vibrations at idle

Aside from the above, anything I should be looking out for? I've already read extensively about the cam chain tensioners, so I shall get those checked soon.

Thank you in advance for your help.
« Last Edit: January 13, 2019, 09:58:51 AM by Goretto »
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6708

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
FLHTCUSE troubles
« Reply #1 on: January 13, 2019, 02:11:02 PM »

Not a fan of the Drag Motor Mount and if mine I would and did rid of the drag motor mount and put a Harley back on it will help diminish the vibration,  I just dealt with this.

Also make sure the torque spec is right many over tighten and don’t use a torque wrench.

Noise out of the throttle body could be normal

Sounds like the bike is over heated a lot you might want to consider jug cooling and oil cooling

https://www.ultracoolfl.com/

Love jugs for heads or similar

You might consider a compression test and a leak down to see the health of cylinders rings piston

Are you starting the bike in neutral ?    You could have compression releases not opening.   Maybe needing cleaning or replacing

Arm chair diagnostics -  please verify and validate
« Last Edit: January 13, 2019, 02:49:06 PM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Goretto

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • www.CVOHARLEY.com

Re: FLHTCUSE troubles
« Reply #2 on: January 13, 2019, 11:48:47 PM »

Noted on the mounts, I might consider swapping again.

The mechanic closest to me did not use a torque wrench so I was careful to not let him overtighten the engine mount bolt. Got some loctite on too. Next time I got to another garage I'll ask them to re-torque everything. Or I might just buy a torque wrench and do it myself.

This model has an oil cooler but no fan on it. However your comment prompted me to check that the cooler is indeed working. I just got it cleaned up with some compressed air and some engine flush. Will check temps with a laser thermometer.

Does this bike have a thermostat valve for the oil cooler?

Love jugs seem very cool, it would be perfect for the stop and go traffic. However they're quite expensive, by the time I add shipping and import duty, the price has almost doubled.

And yes I do start the bike in neutral most of the time. Sometimes neutral is quite hard to find though. Thanks for the compression test tip, I will keep that in mind.
Logged

timo482

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 860
Re: FLHTCUSE troubles
« Reply #3 on: January 16, 2019, 07:50:47 PM »

its geared very tall for 45mph.. cruising rpm 2500 to 3000 - won't ever be in 6th at those speeds  6th is for 70 and up.

there are ways to gear it down to operate better at low speeds - love jugs or harley parade fan would help a lot

Logged

Wunderkind

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 89
  • The older the bull the harder the horn!


    • CVO1: FLHTCUSE 5 Riptide blue/Titanium dust
    • CVO2: FLSTFAE 2005 (First CVO engine - 95 ! cui) denim black/24K Tank Cloisonne
    • CVO3: FLHR 1996, vivid Black, only 10K mls when bought in 2021!
Re: FLHTCUSE troubles
« Reply #4 on: January 17, 2019, 02:38:39 PM »

Hey Bro!

I read your posts a couple of times and here are my 10cents

Have you changed the oil directly?? All your heat problems are related to OIL/Oilpump/Filter. If you didn´t do that already, take care of a good Synthetic Oil. not only 20W50 you can give a fine 10W60 a chance.

The 'noise' you hear from your engine..... seems to me like a problem I already had last year on my 2010. Lifters..... So that you can sort out try this link

It´s a wining noise similiar to that



If that figures out as your problem don´t operate the bike further. Don´t worry.... you can fix that in the beginning....  :)

mike
Logged
V8 or V2 - nothing else!

don´t trailer - ride!

Goretto

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • www.CVOHARLEY.com

Re: FLHTCUSE troubles
« Reply #5 on: January 18, 2019, 02:16:29 AM »

its geared very tall for 45mph.. cruising rpm 2500 to 3000 - won't ever be in 6th at those speeds  6th is for 70 and up.

there are ways to gear it down to operate better at low speeds - love jugs or harley parade fan would help a lot

Thanks for the suggestion, I will look into the gear ratio.

Hey Bro!

I read your posts a couple of times and here are my 10cents

Have you changed the oil directly?? All your heat problems are related to OIL/Oilpump/Filter. If you didn´t do that already, take care of a good Synthetic Oil. not only 20W50 you can give a fine 10W60 a chance.

The 'noise' you hear from your engine..... seems to me like a problem I already had last year on my 2010. Lifters..... So that you can sort out try this link

It´s a wining noise similiar to that



If that figures out as your problem don´t operate the bike further. Don´t worry.... you can fix that in the beginning....  :)

mike

I have since then changed the oil (Harley SAE 50) but haven't had a chance to try riding the bike for a long time, hitting traffic, etc. I also cleaned the oil cooler and made sure it was running at high temp with a laser thermometer.

The noise on my bike sounds different. It's more of a clapping noise. But I will double check and report if it does indeed sound the same.

Thanks for your help everyone, keep'em coming!
Logged

jachd17

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 595
  • 1*
    • MA


    • CVO1: 08 FLHTCUSE3
Re: FLHTCUSE troubles
« Reply #6 on: January 18, 2019, 05:09:11 PM »

Thanks for the suggestion, I will look into the gear ratio.

I have since then changed the oil (Harley SAE 50) but haven't had a chance to try riding the bike for a long time, hitting traffic, etc. I also cleaned the oil cooler and made sure it was running at high temp with a laser thermometer.

The noise on my bike sounds different. It's more of a clapping noise. But I will double check and report if it does indeed sound the same.

Thanks for your help everyone, keep'em coming!


These motors call for SYNTHETIC oil. Synthetic stands up to heat much better than Dino oil. My bike seems to like Redline synthetic 20W60. Clapping type sound could be the compensator, a problematic item in some CVO's.


Logged

fastfreddy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1650
  • MY CVO
    • IA

    • CVO1: 2013 FLTRXSE traded
    • CVO2: 2016 FLTRUSE
Re: FLHTCUSE troubles
« Reply #7 on: January 18, 2019, 05:52:20 PM »

 my 2 cents is, it needs a compensator...   all four that I replaced on my  13 RG kicked back when starting and each one made its own noise of some sort
Logged
SERGU aka the RENTAL ... never home & always broke...Thnx FF

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: FLHTCUSE troubles
« Reply #8 on: January 21, 2019, 09:20:25 AM »

my 2 cents is, it needs a compensator...   all four that I replaced on my  13 RG kicked back when starting and each one made its own noise of some sort

Agree!!

First thing I thought when I saw the video  on the starting issue " Compensator " mine was doing the same thing blowing back out the intake also exhaust back fires.

New compensator it no longer does any of the above.

The oil in the intake you may need to pull the rocker covers and check the CCP release dieiframs between the rocker shafts if they are faulty they'll let oil  be pulled into the intake

My 3 pents worth
« Last Edit: January 21, 2019, 09:33:31 AM by longlast »
Logged

skratch

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2003
    • LA

    • CVO1: 2013 FLTRXSE2 Roman Gold/Burnt Emerald
Re: FLHTCUSE troubles
« Reply #9 on: January 21, 2019, 04:56:46 PM »

how is the battery?  when my battery was getting low, i would get that when trying to start sometimes.  after i replaced the battery, went away.  in my case, it wasn't doing it as often as yours, and i also had the battery actually die on me after stopping one time, requiring that i replace it.
Logged
I understand the concept of reality, but find it too confining as a way of life

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5465
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: FLHTCUSE troubles
« Reply #10 on: January 22, 2019, 09:08:56 AM »

how is the battery?  when my battery was getting low, i would get that when trying to start sometimes.  after i replaced the battery, went away.  in my case, it wasn't doing it as often as yours, and i also had the battery actually die on me after stopping one time, requiring that i replace it.
Had same problem on my ‘07 and took it to dealer thinking compensator. Tech came back with printout indicating bad battery. I didn’t believe him as I always kept it on tender and it really didn’t seem sluggish when cranking. But I did get a new battery a few weeks later and lo and behold the starting problem was resolved.


Sent from my iPhone using Tapatalk
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: FLHTCUSE troubles
« Reply #11 on: January 22, 2019, 07:09:29 PM »

Had same problem on my ‘07 and took it to dealer thinking compensator. Tech came back with printout indicating bad battery. I didn’t believe him as I always kept it on tender and it really didn’t seem sluggish when cranking. But I did get a new battery a few weeks later and lo and behold the starting problem was resolved.


Sent from my iPhone using Tapatalk

That is true as well a low cranking Voltage can create starting issues.  By using a volt tester you can eliminate the battery.

A good battery fully charged would be around 12.5 to 12.8 volts

To check the cranking Voltage put the tester on the battery positive to positive  negative to negative then looking at the tester hit the starter,....at the point of starter engagement the tester will drop from the 12.5/8 volts to NO LOWER then 10.5 volts.

It's best to do the test with the plug wires pulled, if the battery Voltage drops straight away under 10.5V change the battery .

On my 07 Ultra  I'm on my second battery and it's in its (5) fifth year now
Logged

Goretto

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • www.CVOHARLEY.com

Re: FLHTCUSE troubles
« Reply #12 on: January 23, 2019, 08:20:22 PM »

The battery is fine, it was changed in December and when tested it showed normal charging levels.

However, I did have a problem with the battery not charging. The battery charging and engine warning light came on. Turned out I needed a new stator rotor, it was busted.

After that, battery charging warning light went away.

The only times I have the smoke coming out on failed start is when the engine is very hot. On a cold engine, bike starts immediately.
Logged

longlast

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4055

Re: FLHTCUSE troubles
« Reply #13 on: January 24, 2019, 03:07:52 AM »

The battery is fine, it was changed in December and when tested it showed normal charging levels.

However, I did have a problem with the battery not charging. The battery charging and engine warning light came on. Turned out I needed a new stator rotor, it was busted.

After that, battery charging warning light went away.

The only times I have the smoke coming out on failed start is when the engine is very hot. On a cold engine, bike starts immediately.

That's exactly what mine did good on cold starts except for the odd times an exhaust back fire.

But when hot I never knew how it was going to start,...sometime straight away,..sometime crank, crank, crank,.....or miss fire back thru the intake.  (Smokin)  made people's heads turn  ;)

Since I've changed the compensator I don't have any more starting issues.      This is not to say a new compensator would fix your problem      but the symtoms your describing are very similar.

Let us know how you get on.
« Last Edit: January 24, 2019, 03:11:12 AM by longlast »
Logged

fastfreddy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1650
  • MY CVO
    • IA

    • CVO1: 2013 FLTRXSE traded
    • CVO2: 2016 FLTRUSE
Re: FLHTCUSE troubles
« Reply #14 on: January 24, 2019, 06:35:37 PM »

  ^^^ yup   :2vrolijk_21:
Logged
SERGU aka the RENTAL ... never home & always broke...Thnx FF
Pages: [1] 2  All
 

Page created in 0.213 seconds with 24 queries.