Topic: Starter Cover (Read 1002 times)

MJZ · « **on:** August 14, 2006, 10:36:30 PM »

Has anybody seen this starter cover in person? Did it look cheesey? http://www.eglidegoodies.com/id162.html

110tHunDer · « **Reply #1 on:** August 14, 2006, 10:43:59 PM »

Mark, beware of EglideGoodies: http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1151425677

MJZ · « **Reply #2 on:** August 15, 2006, 09:58:19 AM »

Yea, I've been following those threads and am quite surprised. I've gotten at least 6 orders from them and never had any problem at all.

110tHunDer · « **Reply #3 on:** August 15, 2006, 11:39:38 AM »

OK. Sorry, I haven't seen the piece in your photo, but just wanted to make sure you had seen the problems others had experienced with this vendor.

3hawgs · « **Reply #4 on:** August 16, 2006, 06:49:05 AM »

Personally I don't like the looks of it and would also be concerned about the extra heat that it would trap which could be detrimental to the life of the starter. Plus its just another hard to get at piece to keep clean!

Twolanerider · « **Reply #5 on:** August 17, 2006, 12:02:51 AM »

Quote

Has anybody seen this starter cover in person? Did it look cheesey? http://www.eglidegoodies.com/id162.html

Yeah, it looks cheap and cheesy. Not terribly smoothly formed parts, fitting together only averagely, pinned with screws. Even if it was nice metal work putting an ugly bell around the starter wouldn't look too hot anyway.

MJZ · « **Reply #6 on:** August 17, 2006, 09:38:59 AM »

Thanks, I agree. That saved me a couple of bucks, now I need to read on here and find something else for my OCD habit.

Author Topic: Starter Cover (Read 1002 times)

MJZ

Starter Cover

110tHunDer

Re: Starter Cover

MJZ

Re: Starter Cover

110tHunDer

Re: Starter Cover

3hawgs

Re: Starter Cover

Twolanerider

Re: Starter Cover

MJZ

Re: Starter Cover