Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2] 3  All

Author Topic: 2010 cvo S. G. 122 hp  (Read 5874 times)

0 Members and 1 Guest are viewing this topic.

cvobiker

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2643
Re: 2010 cvo S. G. 122 hp
« Reply #15 on: December 28, 2010, 11:08:40 PM »

Just saying' it just seems these newer cranks (06 up) dont hold up to big horsepower... Lots of reports on this board and many others discussing this issue. With your numbers definitely should have welded and plugged the crank. Curious, are you running gear drive cams?
Logged

laylonlor

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1046
  • I love YaBB 1G - SP1!
Re: 2010 cvo S. G. 122 hp
« Reply #16 on: December 29, 2010, 12:36:20 AM »

CHAIN DRIVE CAMS , THE MOTOR WASN'T OUT OF THE BIKE JUST HEADS CAMS AND OTHER GOODIES, WASN'T TAKING THE MOTOR OUT FOR THAT, I'LL CROSS THAT BRIDGE LATER IF I NEED TO
Logged

Proctor

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 82

    • CVO1: 2010 CVO Street Glide
Re: 2010 cvo S. G. 122 hp
« Reply #17 on: December 29, 2010, 04:06:26 PM »

Just saying' it just seems these newer cranks (06 up) dont hold up to big horsepower... Lots of reports on this board and many others discussing this issue. With your numbers definitely should have welded and plugged the crank. Curious, are you running gear drive cams?

That's exactly why I sent my crank out!!! Balanced, welded and timken upgrade.  No worries!!!
Logged
Ported 11.1 heads, Wiseco pistons, T-mans 662-2 cams, SE 58mm T-body, SEST, V&H power duals with Hi Output, Timken bearing, welded and balanced crank .     129.62hp 127.22tq

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3119
Re: 2010 cvo S. G. 122 hp
« Reply #18 on: December 29, 2010, 05:47:56 PM »

Gee wizz leave the guy alone. He is an adult and was well aware of the crank issue before he did the build. It has already been well documented and leave it at that. He is enjoying the ride let it be.
Logged

timtoolman

  • never enough torque!!!!!!!
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 447

    • CVO1: Hillside Stg 4 117, S&S 66 T.B. Woods 400-6, Rush 2-1 Wrath
Re: 2010 cvo S. G. 122 hp
« Reply #19 on: January 06, 2011, 10:28:55 AM »

yeah!  what he said!
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3119
Re: 2010 cvo S. G. 122 hp
« Reply #20 on: January 31, 2011, 04:33:13 PM »

This is the dyno.
Good job to the dealer wrench and Dave at JDs
Logged

laylonlor

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1046
  • I love YaBB 1G - SP1!
Re: 2010 cvo S. G. 122 hp
« Reply #21 on: January 31, 2011, 08:20:14 PM »

yea thats me , i got  2k miles on the build now, been in Fl. blasting around, been running good :bananarock:
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 2010 cvo S. G. 122 hp
« Reply #22 on: January 31, 2011, 08:38:56 PM »


been riding my 2010  S.G., with the new up grades,... feels like a new bike, ended up  130/130, ....to the rear wheel 122/122, ...


CHAIN DRIVE CAMS , THE MOTOR WASN'T OUT OF THE BIKE JUST HEADS CAMS AND OTHER GOODIES, WASN'T TAKING THE MOTOR OUT FOR THAT, I'LL CROSS THAT BRIDGE LATER IF I NEED TO

I'm confused (not uncommon).  How'd you get the 130/130 dyno number at the crank if the engine was never out of the bike?
Logged

bigjohn

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 206
  • "Glorified Briggs and Stratton engine"
Re: 2010 cvo S. G. 122 hp
« Reply #23 on: January 31, 2011, 09:02:14 PM »

Its usually done by calculation.

very nice build laylonor     :2vrolijk_21:

here is some reading on dyno's, I forget most of the story but this explains a little.

http://www.hotrod.com/thehistoryof/113_0603_dynojet_chassis_dyno/index.html

http://forums.gogodiesel.com/showthread.php?13465-whats-the-difference-between-dynojets
« Last Edit: January 31, 2011, 09:30:33 PM by bigjohn »
Logged
Hang on Newt......she's headed for the buckwheat
__________________________________________

HILLSIDECYCLE.COM

  • Banned
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2085
Re: 2010 cvo S. G. 122 hp
« Reply #24 on: February 01, 2011, 06:49:07 AM »

He is probably refering to actual numbers, and the SAE was 122/122.
IF the powerplant was on a engine dyno, then expect to see approx. 15% or more, as the driveline gobbles up that much.
Scott
Logged

Mr. Warlock

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 781

    • CVO1: 2014 CVO Limited - unnamed
    • CVO2: 2011 Softail Convertable "Bourbon Betty" - Traded
    • CVO3: 2005 SE FatBoy - Sold
Re: 2010 cvo S. G. 122 hp
« Reply #25 on: March 17, 2011, 11:54:19 AM »

Seriously............. after looking at the outcome of this build and many others, what would / could be better than this configuration for a new 110? Is there a down side to this build?

Thanks, Rick
Logged
Lived hard and fast, laughed harder than humans have a right to and continue to do so.

sadunbar

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11416
  • EBCM # Stealth - SSBS # 1.1 - SoA # Z&E2525 .01%
    • IL


    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2000 FXR4
Re: 2010 cvo S. G. 122 hp
« Reply #26 on: March 17, 2011, 12:02:39 PM »

Somebody please tell me Charlie Sheen hasn't purchased a CVO.... :nervous:


Just kidding!!!!   :huepfenjump3: :huepfenjump3:
Logged
2007 Screamin Eagle Ultra Classic - Light Candy Cherry and Black Ice
Screamin Eagle 120r
Revolution Performance EMS
Fuel Moto Jackpot headpipes and 4.5" Pro Touring Mufflers
HPI 55mm Throttle Body w/5.3 injectors
BDL clutch w/VPC92T
Traxxion AK-20
Legend Air Suspension
Brembo Brake Calipers/Rotors
Garmin Zumo
575 Chubby's
Bushtec Quantum

Proctor

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 82

    • CVO1: 2010 CVO Street Glide
Re: 2010 cvo S. G. 122 hp
« Reply #27 on: March 17, 2011, 12:17:17 PM »

WINNING...

I like the idea that I kept mine a 110, so when people ask, I say it's a 110, see the badging... 8)
« Last Edit: March 17, 2011, 04:45:48 PM by Proctor »
Logged
Ported 11.1 heads, Wiseco pistons, T-mans 662-2 cams, SE 58mm T-body, SEST, V&H power duals with Hi Output, Timken bearing, welded and balanced crank .     129.62hp 127.22tq

Dr.D

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1109

    • CVO1: 09 SEDFB Sunrise Yellow and Black Quartz
    • CVO2: 2014 CVO Limited silver/orange
    • CVO3: 2015 Indian Vintage Custom 57 Chevy Blue
Re: 2010 cvo S. G. 122 hp
« Reply #28 on: March 17, 2011, 01:36:56 PM »

What are the threshold numbers  for doing a crankcase improvement?
Logged

Mr. Warlock

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 781

    • CVO1: 2014 CVO Limited - unnamed
    • CVO2: 2011 Softail Convertable "Bourbon Betty" - Traded
    • CVO3: 2005 SE FatBoy - Sold
Re: 2010 cvo S. G. 122 hp
« Reply #29 on: March 17, 2011, 04:39:05 PM »

Somebody please tell me Charlie Sheen hasn't purchased a CVO.... :nervous:


Just kidding!!!!   :huepfenjump3: :huepfenjump3:


Sorry, I'm not getting it???

I'm getting ready to do mine and this looks like a very good all around package to me.
Logged
Lived hard and fast, laughed harder than humans have a right to and continue to do so.
Pages: 1 [2] 3  All
 

Page created in 0.159 seconds with 25 queries.