www.CVOHARLEY.com

CVO Technical => General CVO discussion => Topic started by: TimBone on August 14, 2013, 07:55:23 PM

Title: Hyd Clutch line length
Post by: TimBone on August 14, 2013, 07:55:23 PM

Need help see if anyone can tell me the length of the Hyd Clutch line length on
a 2007 FLHTCUSE2.
Putting 14" bars on it and want to get this thing on order before tearing into the fairing.

Thanks for the help.
TimBone

Title: Re: Hyd Clutch line length
Post by: redbeard719 on August 15, 2013, 08:30:21 PM

You can shop by bike at Magnum Shielding's website.

For 14" bars, +6 would probably do, depending on the bars. When I installed Yaffe 14" bars, +8 was perfect, but the bars were closer to 16".  YMMV.

Title: Re: Hyd Clutch line length
Post by: GMONEY on August 17, 2013, 10:56:16 PM

Johnny Vaughn at HDBikeParts(dot)com is the cable guru

Title: Re: Hyd Clutch line length
Post by: TimBone on September 01, 2013, 05:38:31 PM

Quote from: fish eye on August 15, 2013, 08:30:21 PM

You can shop by bike at Magnum Shielding's website.

For 14" bars, +6 would probably do, depending on the bars. When I installed Yaffe 14" bars, +8 was perfect, but the bars were closer to 16".  YMMV.

Great, thanks for the scoop n that.

Title: Re: Hyd Clutch line length
Post by: TimBone on September 01, 2013, 05:39:41 PM

Quote from: GMONEY on August 17, 2013, 10:56:16 PM

Johnny Vaughn at HDBikeParts(dot)com is the cable guru

Thanks dude, great looking bars on your Road Glide!

Title: Re: Hyd Clutch line length
Post by: DLSSOJC on September 01, 2013, 09:31:42 PM

I used a +4" line for 12" bars, so +6" should work fine.