Topic: Relocated 7-Pin Docking Point On '11 FLHXSE2 (Read 7688 times)

DOC.COFFIN · « **on:** May 10, 2011, 01:59:47 AM »

I thought I should share this as it impressed me...As y'all may know the addition of intercom or CB on the '11 FLHXSE2 isn't like the previous year's model...where a new dash piece is retrofitted to include the dockin point for the 7-pin cord that attaches to the headset. On the '11 there is a double sided tape cord retainer that basically glues to your tank...and it looks like S*%# as well. One of the techs at the dealership got a little creative and hid it pretty successfully. Therefore I thought I'd share some pics with the forum. Left side heat shield...here they are...

Doc

DOC.COFFIN · « **Reply #1 on:** May 10, 2011, 02:04:20 AM »

Another..

DOC.COFFIN · « **Reply #2 on:** May 10, 2011, 02:05:06 AM »

And the underside of the heat shield...

DOC.COFFIN · « **Reply #3 on:** May 10, 2011, 02:07:28 AM »

And the last one...

Harleypingman · « **Reply #4 on:** May 10, 2011, 11:19:55 AM »

Very clever; thanks for the pictures. I've seen a powerlet (?) 12V outlet installed in the deflector, but never drew the parallel to mounting the rider headset connector there. I'm going to edit the thread on installing the Boom Audio & Intercom Kit, p/n 77108-09 (now -09A) with a link to this thread to provide an alternative mounting location for the headset connector instead of the kit's clip and tape procedure.

Thanks, again.

Carl

CVODON · « **Reply #5 on:** May 10, 2011, 10:44:27 PM »

Very slick, I am going to install the intercom in the next couple weeks and this is what I needed. I have had the kit for awhile but did not want it taped to the tank. THANKS!

vettmann · « **Reply #6 on:** May 12, 2011, 07:46:11 PM »

Nice Job

LincolnUSA · « **Reply #7 on:** May 12, 2011, 10:28:42 PM »

Did you add those heat shields to your bike? Mine didn't come with any.

CVODON · « **Reply #8 on:** May 12, 2011, 11:09:01 PM »

Regular ole Harley accessory heat deflectors. Plastic but paintable. In the catalog for several years now.

Harleypingman · « **Reply #9 on:** May 15, 2011, 01:17:22 PM »

This is one of those clever mods that is simply too good not to do. I used the p/n 58022-07A kit for '01-'08 bikes, Mid Frame Air Deflectors. Unfortunately, as clever and effective as the mod is, it was also the biggest PITA I've ever experienced over the past 6 years and many, many far more involved mods I've done; this kit simply was not designed for folks with above-average hand size. It was made a bit more difficult because I retained the chrome mid-frame covers which adds a bit of thickness/distance between the deflectors and the various threaded inserts used to attach the deflectors to the bike which was partially dealt with by using longer bolts. Perhaps the '09 and newer bikes with the newer frame will have an easier time with the installation.

That said, it was still very worthwhile and thanks, again, to Doc for posting it.

Carl

Fireguy · « **Reply #10 on:** May 15, 2011, 01:31:51 PM »

Thanks for the post. It's just what I was looking for. Here is a pic of what mine looks like now. Going to do the mod this week before the big ride.

Wayne G · « **Reply #11 on:** May 15, 2011, 03:41:24 PM »

That is a sweet mod.
Sometimes I just shake my head and wonder what the f@#k Harley was thinking when I read some of thier mod. directions. Its like they get tired of the "task" and say "thats good enough" ship it !!!!
Wayne

Harleypingman · « **Reply #12 on:** May 15, 2011, 05:30:46 PM »

Quote from: Fireguy on May 15, 2011, 01:31:51 PM

Thanks for the post. It's just what I was looking for. Here is a pic of what mine looks like now. Going to do the mod this week before the big ride.

Fireguy, I had no paint issues after removing the headset connector from the gas tank. A slight amount of the double-sided tape/adhesive was left, but it was easily removed with 3M Auto adhesive remover used sparingly.

Carl

Fireguy · « **Reply #13 on:** May 15, 2011, 05:40:52 PM »

Thank you Harleypingman. Can't wait to get this project done. Like a freakin kid in a candy store.

Fireguy · « **Reply #14 on:** August 17, 2011, 10:31:23 AM »

After installing the kit on the mid air deflector, any ideas for the rear connection? It looks a little "cheesy" the way they mounted it. Think we can come up with a better idea.

DOC.COFFIN · « **Reply #15 on:** August 17, 2011, 11:28:35 AM »

Quote from: Fireguy on August 17, 2011, 10:31:23 AM

After installing the kit on the mid air deflector, any ideas for the rear connection? It looks a little "cheesy" the way they mounted it. Think we can come up with a better idea.

None so far and I agree it does look cheesy...however, the same as anyone elses intall. I will say this it has cramped the fitment of my bag lid on that side to the extent that it makes the lid a little difficult to open, but the biggest issue I have is that it has rubbed the paint and lid pretty significantly in that spot. Thank goodness it's only seen when you open the lid...

So Fireguy, or anybody else for that matter, if you come up with a more stealth install for the rear, then please post the pics!!!

Doc

bandit · « **Reply #16 on:** August 17, 2011, 01:00:51 PM »

what about this option, - if you have a topcase -, which
a friend of mine did on his FLTRSE3?

bandit · « **Reply #17 on:** August 17, 2011, 01:01:34 PM »

near view

bandit · « **Reply #18 on:** August 17, 2011, 01:02:05 PM »

closest view

bandit · « **Reply #19 on:** August 17, 2011, 01:04:16 PM »

only with a rack, put it
under the rack.

Fireguy · « **Reply #20 on:** August 17, 2011, 01:57:23 PM »

May have an idea with attaching the PPT/connector on the detach rack and adding a 12 pin plug. The only time I will have the tour pak on is when my wife is riding. So when I take off the TP, the PTT/connector switch will come off also. Post some pics along the way.

Cvostu · « **Reply #21 on:** September 03, 2011, 11:15:55 AM »

What is a ctek?

SpeedshifterZ06 · « **Reply #22 on:** September 03, 2011, 11:23:09 AM »

Quote from: cvostu on September 03, 2011, 11:15:55 AM

What is a ctek?

Battery trickle charger.

Cvostu · « **Reply #23 on:** September 03, 2011, 11:28:41 AM »

Ahh. I see. Thanks. I have TP off way too much. I have mine installed the old fashion way. Neet idea though.

Fireguy · « **Reply #24 on:** September 05, 2011, 02:11:38 PM »

A buddy of mine came up with this idea for the passenger communication. This works for me beacause the only time the TP will be on is when my wife is on the back. This will help to make the bike have a cleaner look.

Fireguy · « **Reply #25 on:** September 05, 2011, 02:13:18 PM »

Fireguy · « **Reply #26 on:** September 05, 2011, 02:14:11 PM »

There are two wire harnesses that go to the connecter. One pig tail that comes off the PTT switch and the other comes from the fairing. He cut and spliced the wires to make one long harness. Under the seat he cut the harness and put in a 12 pin connecter for when he takes off the TP.

Fireguy · « **Reply #27 on:** September 05, 2011, 02:15:28 PM »

Author Topic: Relocated 7-Pin Docking Point On '11 FLHXSE2 (Read 7688 times)