www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: gordy on March 17, 2011, 11:13:07 PM

Title: Lifter replacement
Post by: gordy on March 17, 2011, 11:13:07 PM

I am going to install new cams in my SERG 110" and am wondering if the SE lifters are any better than the stock ones?
Are the stock lifters #18538-99B?  Thanks   

Title: Re: Lifter replacement
Post by: hd-dude on March 18, 2011, 12:30:40 AM

Stay with the stock lifters or the Fueling HP+ lifters.

Title: Re: Lifter replacement
Post by: cvobiker on March 18, 2011, 02:02:12 PM

Black Ops are a good choice... and the icing on the cake are the Woods Directional Roller Lifters, but $$$$ :-X

Title: Re: Lifter replacement
Post by: VANAMAL on March 18, 2011, 02:55:56 PM

Im using the feuling hp lifters and its super quiet. sounds like a sewing machine ( almost ) :bananarock:

Title: Re: Lifter replacement
Post by: bigdave110 on March 18, 2011, 03:40:25 PM

I like the S&S lifters.
They dont bleed down so no noise on cold start.
They have worked fine for me in all my motors.
Good luck with what ever you choose.
Dave

Title: Re: Lifter replacement
Post by: Talon on March 18, 2011, 04:10:00 PM

If you stay stock, don't reuse the old ones get a new set.

Craig

Title: Re: Lifter replacement
Post by: reo on March 18, 2011, 08:57:37 PM

AMS lifters would be my choice

http://www.automotivemachine.com/index.php?option=com_content&view=article&id=46&Itemid=53 (http://www.automotivemachine.com/index.php?option=com_content&view=article&id=46&Itemid=53)