www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: New PM Wheels on SEEG  (Read 3845 times)

0 Members and 1 Guest are viewing this topic.

tntdse

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
New PM Wheels on SEEG
« on: June 04, 2007, 11:34:47 PM »
Greetings all!

Thought I would post a pic of the new PM wheels I recently installed with the single rotor up front. The wheels are Performance Machine Roulette 18" rear with a 150 and 21" front. The braking seems to be as good as the stock duals and I don't drag the stand as frequently. I also had the Freedom power package installed this past weekend.

Regards,

tntdse
Logged

Free

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 280
  • FLHRSEI.ORG
Re: New PM Wheels on SEEG
« Reply #1 on: June 04, 2007, 11:43:33 PM »
tntdse

looks great.  I went with the Wrath PM wheels 21/18. 

how do you like the ride?
Logged

tntdse

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: New PM Wheels on SEEG
« Reply #2 on: June 04, 2007, 11:46:48 PM »
I've got close to 1K miles on them and about half that is two up and I kinda like it. Feels a little more responsive. Corners seem fine so far...no wobble yet..hehe

tntdse
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: New PM Wheels on SEEG
« Reply #3 on: June 05, 2007, 12:17:45 AM »
Lookin' good, but the reflector on the leg has got to go!....

What did you have FCC do?
Logged

tntdse

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: New PM Wheels on SEEG
« Reply #4 on: June 05, 2007, 12:21:39 AM »
Yeah, I was afraid someone was going to nail me on the reflectors. I tried to pop them with some 40lb fishing line before the picture and kept breaking it so I said what the hell. I will get them off this week. Any ideas? I had freedom put the pipes on and dyno tune. Dropped off Friday afternoon and picked up on Saturday afternoon. Got dumped on friday going through Truckee. I posted the dyno sheet in the SEEG thread regarding dynos. Let me know what you think HD.

tntdse
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: New PM Wheels on SEEG
« Reply #5 on: June 05, 2007, 12:25:54 AM »
Quote from: tntdse on June 05, 2007, 12:21:39 AM
Yeah, I was afraid someone was going to nail me on the reflectors. I tried to pop them with some 40lb fishing line before the picture and kept breaking it so I said what the hell. I will get them off this week. Any ideas? I had freedom put the pipes on and dyno tune. Dropped off Friday afternoon and picked up on Saturday afternoon. Got dumped on friday going through Truckee. I posted the dyno sheet in the SEEG thread regarding dynos. Let me know what you think HD.

tntdse

Try heating up the leg with a heat gun first, then u use a strong pick to grab the reflector and pull it off.

I checked out your sheet and the numbers look good, Nice to see Brad using SAE corrected runs as well.
Logged

jeffj

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1201
  • "Teach a man to swim, but not while he's drowning"

    • CVO1: 2004 Orange Pearl and Jet Black FLHTCSE & 2002 Candy/Brandywine FLHRSEI
    • CVO2: 2006 Autumn Haze FLHTCUSE Sold - 11-11-12 Bought another 2006 SEUC
    • CVO3: 2003 Gold FLHRSEI2 Sold CVO4: 2002 Purple FLHRSEI Crashed
Re: New PM Wheels on SEEG
« Reply #6 on: June 05, 2007, 06:30:32 AM »
Wow, I really like those wheels 

I hope with just a single brake on the front that you can get stopped quickly with all that Freedom Power

Scooter, looks good  :2vrolijk_21:



jeffj
Logged

TankerPig

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 138
  • Be careful, sobriety can make you do silly things!
Re: New PM Wheels on SEEG
« Reply #7 on: June 07, 2007, 02:31:55 PM »
The ride looks great.  How long did it take for you to get the wheels?  I just ordered a set of PM contrast cut gassers and was told to expect an 8-10 week wait.  From what I was told, PM has a reputation of taking a little long with orders.
Logged
2005 Screamin Eagle Fatboy
V&H Big Shots Staggered
Zipper's High Flow Air Cleaner
PCIII USB
PM Contrast Cut Gasser wheels, pulley, rotors

tntdse

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: New PM Wheels on SEEG
« Reply #8 on: June 07, 2007, 04:15:20 PM »
Thanks! They told me 6 to 8 weeks and I got them in 7 weeks.

tntdse
Logged

theslash

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 152
  • 2019 FLHXSE
Re: New PM Wheels on SEEG
« Reply #9 on: June 07, 2007, 04:31:31 PM »
very nice
Logged
SLASH

hogasm

  • Guest
Re: New PM Wheels on SEEG
« Reply #10 on: June 07, 2007, 05:25:42 PM »
Quote from: tntdse on June 04, 2007, 11:34:47 PM
Greetings all!

Thought I would post a pic of the new PM wheels I recently installed with the single rotor up front. The wheels are Performance Machine Roulette 18" rear with a 150 and 21" front. The braking seems to be as good as the stock duals and I don't drag the stand as frequently. I also had the Freedom power package installed this past weekend.

Regards,

tntdse

What did you do to the front fender to get clearance for the 21" wheel
Logged

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: New PM Wheels on SEEG
« Reply #11 on: June 07, 2007, 05:49:44 PM »
When I got the pumpkin home last weekend, I just grabbed the reflector by hand and pulled.  Once the reflector was off, I just peeled off the sticky then cleaned up the fork with some chrome polish...
Logged
2012 Black/Orange SEUC

tntdse

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 80
Re: New PM Wheels on SEEG
« Reply #12 on: June 07, 2007, 08:29:08 PM »
Thanks for all the comments and ideas! To answer the clearance question, the 21"X3.5" with a 120x70x21 Metzler will fit without any mods. I did oversize the rear mounting holes on the front fender to adjust the attitude a little. It should fit without modification.

tntdse
Logged

TexasBowhunter

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 335
  • 09 Street Glide
Re: New PM Wheels on SEEG
« Reply #13 on: June 07, 2007, 08:41:10 PM »
Well let me be the first to say I didn't like them when I opened the thread and I saw them for the first time...
hey each to his own...
But times do change as well as opinions...
They are beginning to really grow on me...The more and more I see them the more I think they rock...
Good choice and they look good on the eeg...
paul
Logged
Ride safe

DW6019

  • Banned
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 576
Re: New PM Wheels on SEEG
« Reply #14 on: June 23, 2007, 10:16:05 PM »
A friendly warning to those buying the Anodized Contrast Cut wheels. Anodizing will fade fast if not cared for and the contrast cut part is bare alum. It is good quality alum, but has no coating. It will pit, dull, spot etc if not constantly cared for. Sunlight (UV), brake dust (read change to a/m ceramic pads fast) and almost any brake dust product will dull the anodizing at a pretty significant rate.
Not sure how to properly care for them, but a friend had them on a crotch rocket and he couldn't keep up, so finally found a Powdercoat place and had his powdered clear over the anodizing. Now they shine very nice and are easy to clean, but Powdercoat guy would not guarantee it as it was first time he had done that type work.
Logged
Pages: [1] 2  All
« previous next »
 

Page created in 0.158 seconds with 21 queries.