www.CVOHARLEY.com

CVO Technical => Milwaukee-Eight => Topic started by: upsjim on August 17, 2021, 10:13:30 PM

Title: CVO ULTRA 2020
Post by: upsjim on August 17, 2021, 10:13:30 PM
2020 CVO break down  once in MY, NEXT IN VIRGINIA
codes blown..
p1100c,
p1511c
p2135c
c1100c
also
1510
1511
throttle sensor checked ok
all wires checked
found no bad wires
5 hours looking at it on road
could not duplicate
made it home to INDIANA  from VIRGINIA,
bike now has,17,000 miles on it
has anyone experience this.
called corporate , gave me reference  number for the dealer.  any thoughts or ideas?
both breakdowns  I was in fast lane, when throttle just stopped  any input appreciated
Title: Re: CVO ULTRA 2020
Post by: HD Street Performance on August 18, 2021, 05:35:20 PM
Have the bars been changed,?
Title: Re: CVO ULTRA 2020
Post by: HOGMIKE on August 18, 2021, 06:00:00 PM
Any mods to the bike?
Bone stock?
 :nixweiss:
Title: Re: CVO ULTRA 2020
Post by: upsjim on August 18, 2021, 06:06:30 PM
No all stock nothing has been altered
Title: Re: CVO ULTRA 2020
Post by: HOGMIKE on August 18, 2021, 10:28:04 PM
No all stock nothing has been altered

If it were me I’d let the dealer fix it under warranty.
 8)
Title: Re: CVO ULTRA 2020
Post by: oe542bob on August 19, 2021, 12:59:07 PM
2021 Streetglide CVO, 310 miles at the time of the codes
I had intermittent limp mode ( would only last a few seconds ), brief ghosting of the throttle
2 codes: P2138 & P1510
Turned out to be a wire under the fairing that didn’t properly snap into the plastic plug. It was crimped ok, but was losing contact because it could move slightly. Tech replaced the crimp connector, which he said firmly snapped into the plug housing. Cleared codes. All good now.