Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: While I am asking questions  (Read 270 times)

0 Members and 1 Guest are viewing this topic.

TonyO77

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2004 SEEG
While I am asking questions
« on: June 08, 2021, 04:31:52 PM »

Does anyone know if the breather valve assemblies that come with the stock cam service kit work oh me 04SEEG Heads?
Logged

SIKBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 524
  • www.CVOHARLEY.com
    • AL


    • CVO1: 2004 FLHTCSE: Orange Pearl & Jet Black
Re: While I am asking questions
« Reply #1 on: June 08, 2021, 05:28:04 PM »

Since you’ve got it opened up, do yourself a favor and put some Rocker Lockers in.  I used Rockout Brand $15 on eBay, John is a great guy and you’ll get o-rings plus an extra sleeve with his kit.
Logged

TonyO77

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • www.CVOHARLEY.com
    • GA


    • CVO1: 2004 SEEG
Re: While I am asking questions
« Reply #2 on: June 08, 2021, 05:49:34 PM »

What are these Rocker lockers you speak of?
Logged

SIKBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 524
  • www.CVOHARLEY.com
    • AL


    • CVO1: 2004 FLHTCSE: Orange Pearl & Jet Black
Re: While I am asking questions
« Reply #3 on: June 08, 2021, 06:57:30 PM »

Basically they are brass sleeves designed to keep your rocker arms from moving on the rocker plate bolts.  They will quiet down that top end ticking.  Tons of youtube videos on them.  I wouldn’t tear into the top end just to install them but if I were already in there, I wouldn’t put it back together without them.  They really worked for me and got rid of that annoying tick.
Logged

SIKBIRD

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 524
  • www.CVOHARLEY.com
    • AL


    • CVO1: 2004 FLHTCSE: Orange Pearl & Jet Black
Re: While I am asking questions
« Reply #4 on: June 08, 2021, 07:05:47 PM »

And while the helpful hints are flowing...torquing the rear bolts on the rear cylinder is a real beyotch so I took an old 7/16 socket and ground it down to where just the head of the bolt sat in it to give me room to get my torque wrench in there.  My grind isn’t perfectly level but you get the idea.
Logged
 

Page created in 0.109 seconds with 21 queries.