CVO Technical > Intake/Exhaust/ECM

Question about tuning

(1/1)

TonyO77:
When I put this 51mm throttle body on my 2004 SEEG is it even going to be rideable before I have it tuned?
Everything inside the engine is bone stock except for the cam plate, pushrods and oil pump, it’s a 103” with Rinehardt true duals.
Or should I haul it to a tuning shop?

rayson56:
It'll need to be tuned ASAP but whether you ride it in or trailer it in (I think that's your question) depends on how far it is to the shop. A short run should be ok but a little common sense will go a long way on this one. It's never a good idea to ride any distance on a bad tune, although I ass-ume running rich for a bit is better than running lean.

Good Luck

TonyO77:
I have toyed with the idea of putting a restrictor plate on it, until I can get it tuned, I live in po’ dunk so I’m gonna have to take it about 70-80 miles to get it tuned and who knows when they can do it.
Not looking forward to losing and bottom end power, but unless I can come up with a stock tb or a shaft for the one I have, it is what it is

Navigation

[0] Message Index