Topic: Pics of FXDWG 2/3 without fairing (Read 11162 times)

KLars1 · « **on:** December 17, 2005, 11:55:41 AM »

Please post pics of FXDWG 2s/3s without the mini fairing!! Also, do anybody have pics of the FXDWG 2/3 with the Billet Headlight from Harley P/N 67704-03

Twolanerider · « **Reply #1 on:** December 17, 2005, 01:11:22 PM »

Quote

Please post pics of FXDWG 2s/3s without the mini fairing!!

KLars1 · « **Reply #2 on:** December 17, 2005, 03:59:20 PM »

Nice! Thanks for the link...I have been thinking that the Harley headlight might be a little too big for my liking. Headwinds appear to have a really nice product.

Thanks again,

Kevin

Twolanerider · « **Reply #3 on:** December 17, 2005, 04:41:48 PM »

Quote

Nice!

nidan · « **Reply #4 on:** December 26, 2005, 12:14:09 PM »

Personally , I think the headlight cover on the FXDWG2/3 is one of the key styling elements . I am looking at changing the bulb to an HID with a brighter low beam though.

CVO WG3 · « **Reply #5 on:** January 12, 2006, 07:30:55 PM »

Wish I'd taken some pics this weekend - had the fairing off to put a new bulb in. Stock headlamp housing is a bit too small for the bike, IMO.

LT · « **Reply #6 on:** January 15, 2006, 03:25:32 PM »

Here's a picture of mine with the Harley headlight housing.

CVO WG3 · « **Reply #7 on:** January 15, 2006, 07:14:18 PM »

LT, what seat is that?

LT · « **Reply #8 on:** January 16, 2006, 02:20:57 PM »

A Corbin Gunfighter done in grey leather with a light grey side/top panel. The funny thing about the seat is that it's a screw up on Corbin's part. I actually wanted faux ostrich for the side/top panel (to somewhat mimic the stock seat) and this is what they sent. I was going to return it but instead decided to see what it looked like on the bike. I got a lot of positive comments so I decided to keep it (I actually like the looks of it, too). It sure made a difference in comfort for me. The stock seat killed my lower back after a 50 miles or so.

KLars1 · « **Reply #9 on:** January 19, 2006, 12:46:20 AM »

Quote

Here's a picture of mine with the Harley headlight housing.

LT-

Thanks! That was exactly what I was looking for. Awesome looking WG3. How about some closeups of the seat?

And tell us about that motor! [smiley=xyxthumbs.gif]

CVO WG3 · « **Reply #10 on:** May 06, 2006, 09:57:27 AM »

KLars1... the bike looks ok with the standard headlight. I wish I'd taken a pic of mine w/o the fairing. The stock headlight housing is chromed, and I think it's the standard WG headlight. It looks pretty good. I know some feel the fairing is part of the package and the way the bike is supposed to look, but I've never cared for it. Pulling the fairing off is a fairly quick job, if you have the right tools lying around. If not, $20 at any decent auto parts store or hardware store will get you what you need. (Torx bit and an extension.) I'll attach a shot (lousy quality) of mine with an aftermarket headlight...

CVO WG3 · « **Reply #11 on:** May 06, 2006, 09:58:43 AM »

uh... sorry, this should be a better size...

KLars1 · « **Reply #12 on:** May 13, 2006, 09:59:39 AM »

Nice bike CVO WG3!

What kind of headlight is that?

Also, how happy are you with the removable sideplates and turn signal relocation kit?

CVO WG3 · « **Reply #13 on:** May 14, 2006, 05:35:59 PM »

KLars1,

This is the headlamp...

CVO WG3 · « **Reply #14 on:** May 14, 2006, 05:38:00 PM »

I'm pretty sure you CAN'T use the bobtail rack with the detachable sideplates.

CVO WG3 · « **Reply #15 on:** May 14, 2006, 05:39:33 PM »

I'll take a close up pic of the relo kit in the next couple of days...

CVO WG3 · « **Reply #16 on:** May 27, 2006, 07:34:36 PM »

Will try to post a few pics of the bike with and without the detachable sideplates....

CVO WG3 · « **Reply #17 on:** May 27, 2006, 07:37:45 PM »

CVO WG3 · « **Reply #18 on:** May 27, 2006, 07:38:14 PM »

CVO WG3 · « **Reply #19 on:** May 27, 2006, 07:39:23 PM »

KLars1 · « **Reply #20 on:** June 05, 2006, 02:26:13 AM »

Thansk CVO WG3 for the pics. I appreciate it...the relo kit looks pretty good.

It looks like you got your bike nice and shined up! Looking Good! [smiley=xyxthumbs.gif]

KL

floridashowbike · « **Reply #21 on:** September 29, 2006, 02:26:51 PM »

I like the looks of a WG3 without the fairing but hated the stock headlight ring. i purchased a chrome ring extension from harley and it looks great.

SPIDERMAN · « **Reply #22 on:** October 03, 2006, 02:37:32 PM »

Quote

I like the looks of a WG3 without the fairing but hated the stock headlight ring. i purchased a chrome ring extension from harley and it looks great.

Beauty is in the eye of the beholder. Once of the things I liked about this model was the bikini fairing. It was a nod to the custom FXR's of the early 90's. (Dyna's replacing FXR's in the H-D lineup)

B B

floridashowbike · « **Reply #23 on:** October 06, 2006, 09:59:07 AM »

Looks awesome!

RJ749 · « **Reply #24 on:** March 12, 2007, 10:01:29 AM »

This goes back awhile but I just came across a couple of pics without the fairing on my G3.

RJ749 · « **Reply #25 on:** March 12, 2007, 10:55:42 AM »

Another

Author Topic: Pics of FXDWG 2/3 without fairing (Read 11162 times)

SPIDERMAN