www.CVOHARLEY.com
Custom Vehicle Discussions => Screamin’ Eagle® Ultra Classic® Electra Glide® => Topic started by: Devious on August 11, 2017, 11:02:39 AM
-
I ordered the Khrome Works 10 inch rise 1 inch bars 12 inch center width. Im a do it yourself kinda person and before I got into taking it apart I was wondering if anyone knew if I would need to get new brake and clutch cables. My bike has the clear plastic coated braided cables. Thank you
-
Hi Devious... I installed LA Chopper Twin Peaks Bagger Bars (10") and used the stock lines (hydraulic). I did mock things up before fully disassembling to see if there was enough line there. My biggest issue was re-running all the wires - recommend just taking time and making sure it is done right. Sorry I can't be of more help... Bear
-
Thanks for the info. I got it done. Once i got the fairing off there was plenty of slack. I probably could have gone higher if i wanted too. Thanks again
-
Glad the bars worked out for you.
I sure like the Khome Werks 12" Bobber Apes that I installed on mine.
Had to extend the wires but the brake and clutch lines were plenty long enough with minor rerouteing.
-
I didn't have to extend any wires. I cut a few zip ties under fairing and it worked out just fine. I'm going to take a pic tomorrow and post it here