Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[how2]

NO POWER ON THE TRIGGER WIRE WHEN PRESSING THE START SWITCH.  HELP WHERE ID THE RELAY ON A 2019 CVO STREET GLIDE I CANNOT FIND IT ANY WHEAR.

[Twolanerider]

In the fuse panel.

[08glide]

just a thought, but try the KILL switch. I always shut mine off & onn with the kill switch. maybe you hit it by mistake

[how2]

There is no fuse box for the starter

[Twolanerider]

There is no fuse box for the starter

Not a separate starter fuse panel. The bike has no such panel.  In the main fuse panel.

[how2]

it has fuse panel but all fuses are good

[Joel]

Do this to confirm battery and starter are ok.
Put bike in neutral,  cycle on off on to listen for fuel pump operation.
If you can hear the pump cycle, confirm bikes in neutral and use a jump wire from main battery cable at starter to the igniter wire ( small wire on solenoid) crank over the engine and see if it starts.
Did you check for codes?

[kojak]

Check battery in remote?

Does your fuel pump prime? If your starter isn’t spinning,it should be fairly easy to diagnose.

[how2]

did all of that and everything works? no juice on the wire at the starter ,the trigger wire

[VANAMAL]

sounds like fob batteries to me. Ck new ones too before install.

[how2]

all-new batt

[Twolanerider]

it has fuse panel but all fuses are good

Check the relay too.  It's in the panel but it's not a fuse.

[how2]

just to let everybody know it was the BCM MODULE.   BUT HOW DO REPROGRAM THE SECURITY SYSTEM