www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: GMR-PERFORMANCE on March 01, 2017, 09:06:16 AM

Title: CVO 117 build with Fullsac DX and his new mufflers
Post by: GMR-PERFORMANCE on March 01, 2017, 09:06:16 AM
Not like the 117 kit is new or that we have not built countless kits at this point. However I was able to install the FS DX head pipe and his new complete muffler. these have the 2.0 core. Great sound nice rumble not as loud as the cursher mellows , ( i like that ) but twist the throttle and they sound great .

Build wise the specs are on the sheet. I had a touch of slip down low but the customer wanted me to back off on spring rate .. Not like he is going to be doing 2000 RPM pulls . Some noise in the sheet it was due for tires they where chopped badly .. Overall the Alberta boys are happy campers . ( we built two of these )


 More tq than we have seen before with a great curve .   Hats off to you Steve outstanding job on the mufflers

(https://c1.staticflickr.com/1/692/33146221936_c791f194be_b.jpg) (https://flic.kr/p/Sv23Z7)CVO 117 (https://flic.kr/p/Sv23Z7) by GMR Performance (https://www.flickr.com/photos/146449314@N07/), on Flickr
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: Snakepit on March 01, 2017, 09:40:12 AM
beauty! What compression at?
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: ultrarider123 on March 01, 2017, 09:48:36 AM
Steve, that 117 build looks great.  Usable power all across the scale.  I was really looking at your 113 (based on the results Joevibe received on his build) but this 117 looks dang good, too.  Decisions, decisions....
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: Scott7d on March 01, 2017, 10:08:02 AM
You could either pull a horse trailer, or throw wings on it and take flight. Very nice!!
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: rockytop117 on March 01, 2017, 02:32:36 PM
Stock heads?
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: JoeVibe on March 01, 2017, 04:10:02 PM
Quote from: Haird on March 01, 2017, 09:48:36 AM
Steve, that 117 build looks great.  Usable power all across the scale.  I was really looking at your 113 (based on the results Joevibe received on his build) but this 117 looks dang good, too.  Decisions, decisions....

Go for it Haird! The 113 is fun but the 117 is funner!
Title: Re: CVO 117 build with Fullsac DX and his new mufflers
Post by: BADRDE on March 01, 2017, 08:09:22 PM
Nice Numbers Steve, I have to say those are what I am looking for once I do my intake valve and port my heads, also install your 600 cam. I just got my 117 done today. used the whole kit except pistons, went with 10.7:1 from Suburban speed.  End up with 121/130 with the 259e and Xtreme True Duals. Love the sound and what a difference over that 110.