www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Limited => Topic started by: 4fun on April 12, 2017, 11:38:19 AM
-
Finally decided to change the bars after getting pains in the arm. I didn't want to go above the fairing so I went with the 10" Twin Peaks.
Install wasn't all that bad. About 5 hours. Wires went in the bars fairly easy.
Although the height is better, I am not sure I gained too much since the pull back is less. I didn't test ride yet (raining now) but I do like the hand position better.
(https://uploads.tapatalk-cdn.com/20170412/514a83a11c8af1df25cc91f18860aa7e.jpg)(https://uploads.tapatalk-cdn.com/20170412/0c53b99e9f89a60f03d1aeac984553e4.jpg)
Sent from my SM-G930V using Tapatalk
-
Looks good Brother !!! Hope they work out for you.
Dante
-
This is my 2015 Limited with 12" KST Bars fitted.
-
Looks good Brother !!! Hope they work out for you.
Dante
Thanks, got take it out for an hour this afternoon. I like the hand position on these bars. Seems like it is easier to dive into corners , could just be my imagination. I do need to rotate the bars back further. At least I am now an expert at taking the fairing apart.
Sent from my SM-G930V using Tapatalk
-
This is my 2015 Limited with 12" KST Bars fitted.
They look nice, I was trying to keep the bars below the fairing for the cooler temps.
Sent from my SM-G930V using Tapatalk