Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[stripclub]

Was wondering on recommendations for a hitch and trailer wiring harness with isolator for my 2015 FLTRUSE? The hitch needs to be 1 1/4" receiver type to work with a N-Line trailer 1 1/4" receiver. Thanks in advance.

[Yellow09SERG]

I used Bushtec on the wiring and have been happy. I am sure some others will chime in but I understand that there are a couple other aftermarket companys that are making the isolator and people seem pleased with them also.

[Chains]

Me too, Bushtec to me seems the simplest one to install.  That being said, I have no experience with others, all 4 of my bikes that I pulled trailers with were Bushtec setups.

[OBB]

High Maintainence planning on doing more shopping on your Canada trip? 

[DCFIREMANN]

I have the Bushtec hidden hitch and wiring harness. I like the setup and they are soooooooo easy to install.

Be Safe

THE DAWG

[Yellow09SERG]

If you deal with Bushtec be sure to tell them what connector you are using otherwise they will send the isolator for the Bushtec trailer. 4, 5, or 6 wire and depending on your trailer you may have to buy the trailer pigtail and splice back in to get everything correct.

[stripclub]

High Maintainence planning on doing more shopping on your Canada trip? 

She can fill up a trailer on a overnight trip.

[stripclub]

Thanks to everyone for the response. It seems like Bushtec is a favorite among everyone. After checking several hitches, who had what in stock, and all I ended up ordering a Khrome Werks with the 1 1/4" receiver that will work with the NLine trailer make receiver. I also ordered the correct plug n play wire isolator with trailer harness for a 4 wire. I should have all items hopefully by this weekend. I will respond with a review on the hitch and wiring isolator.


Sent from my iPhone using Tapatalk

[stripclub]

This is the hitch, even though I do not need the ball receiver, the NLine male receiver will plug right in


Sent from my iPhone using Tapatalk

[Jbbrown73]

I bought a new Roadstar and had the hitch and light harness installed by the factory traveling Bushtec folks while in Thunder Beach last weekend. Great guys, did a nice job installing it.