Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[68 XLCH]

The procedure that I followed:  (best that i can remember)

1  Have a USB without any files on it, at least 8G  ( the nav updates that i downloaded were 3.4 G)

2  Press the trip button to get the electric going on the bike.

3  Turn on the Infotainment system, it boots, accept screen goes away now automatically.

4  Inserted the USB

5  Setup

6  System Info

7  Navigation

8  Exp for Update

9  Select the USB

This was the process to get the finger print, i was amazed it took 2 to 3 minutes.



Then brought the USB in the house, went to the  HD Navi web site and logged in

Opened the Naaviextras software on my computer

Had to log in, in my software.

It said i did not have a device plugged in.

I plugged the USB into the computer.

It said there was an important update, (this was Navi extras software update) I clicked to update the software

Then I think it said an update (maps) was available, and i clicked Install.

2.5 hours later the software was downloaded to the USB.


In the morning, I again went to the bike pressed the trip meter for power

Turned on the Infotainment system

After it booted i loaded the USB

It recognized it and asked if I wanted to update

I think i then clicked OK

About an hour and twenty minutes later it had finished updating the Nav on the bike.



Reference the number of files on the USB: I honestly don't recall, there may have been 3, but as long as there were no files when you started the process it should not be an issue because you are not moving/copying or anything to the files.  The infotainment will recognize what it needs and install the update.
If it is missing a file or some other download issue exists then you would have to delete the files and do the finger print and download again.

[mjb765]

it is doing an update on the bike now....we will see what I have when it's done

UPDATE---It's done and now I have to 2017 maps.......took over an hour.

Thanks for all the suggestions....wish I could say for sure what worked...but I did the exact same thing twice and it worked the 2nd time.....

[Paradigmtilt]

I followed these steps and everything went fine until it gets to 25% or so of the download and I get a message saying the download has been interupted please re-insert the usb drive. I have done this a dozen times and still get to the same point and get this message again.
Any thoughts?

[dm930]

it is doing an update on the bike now....we will see what I have when it's done

UPDATE---It's done and now I have to 2017 maps.......took over an hour.

Thanks for all the suggestions....wish I could say for sure what worked...but I did the exact same thing twice and it worked the 2nd time.....

Mike, do you see any difference visually from 2016 to 2017 version?

[mjb765]

Mike, do you see any difference visually from 2016 to 2017 version?

I haven't used the GPS yet and just went in to see the version. It's just a map update...I doubt there will be any visually noticeable difference.

[dm930]

Got my fingerprint done successfully.  Now to go to my buddies house to use his PC to download the software update cause I use a Mac.... 

By the way, are there any infotainment updates we should be looking at as well???

[68 XLCH]

I followed these steps and everything went fine until it gets to 25% or so of the download and I get a message saying the download has been interupted please re-insert the usb drive. I have done this a dozen times and still get to the same point and get this message again.
Any thoughts?

If you have a good internet connection then it may be the Navi website that is having an issue.

I would delete whatever is on the usb, do another fingerprint, and then try again.

If the same thing occurs, then i would wait until much later or tomorrow and try again.

If you have the same issue then, I would try another USB.

[Paradigmtilt]

Thanks for the reply, I should have been more specific. I did the thumbprint and took that to the navi toolbox and verified and downloaded the update along with the NA map. It installed on the usb and completed. I took the sub to the bike in Acc mode and installed the sub and the download started. Here is where I get to my previous post. On the bike the update process stops and the interrupt message appears.
Now the bike is stuck in update mode when you shut down and restart .  :confusedI'm thinking of pulling the main fuse to see if I can get back to normal infotainment system 

[Paradigmtilt]

And I also have the files on 2 different sub in case one was bad

Thanks

[dm930]

So, I've gotten my fingerprint, downloaded the correct software to the usb drive in 15 minutes.  Booted up the infotainment, loaded the usb onto the bike, it immediately recognized it, and now it's "AUTHENTICATING".  Has been doing that for 10-14 minutes so far.  Do I just let it continue?  Trickle charger is on also.

UPDATE...   I cancelled the AUTHENTICATING part after 20 minutes and began the process over again.  This time it AUTHENTICATED in 4 minutes, I hit YES and the update is now installing as of 10:44 pm...  Hopefully within the next hour it will be completed...

2ND UPDATE... The update completed in 1 hour and 15 minutes with no apparent issues.

Thanks to the great folks of this forum once again, especially 14CVOultra!

[Cat Eye]

Did the update....but now my compass is backwards!

North-South Ok
East-West is reversed!!!

Anyone else seeing this?

[OBB]

Did the update....but now my compass is backwards!

North-South Ok
East-West is reversed!!!

Anyone else seeing this?

Haven't messed with it to be honest with ya.

[Cat Eye]

Riding to MV today ... Was heading west on turnpike and the red needle was pointing to the right then heading south the red needle was pointing down??

[WTF Chuck]

Just for info anyone trying to doe map update make sure the firmware is at 1 20 1 some have not been able to do the map update on older firmware.  In the Valley now so won,t be on here much.

[mjb765]

Just for info anyone trying to doe map update make sure the firmware is at 1 20 1 some have not been able to do the map update on older firmware.  In the Valley now so won,t be on here much.

Wish we were in the Valley with ya......had to cancel the trip this year...