Topic: winter mods (Read 6818 times)

FlatoutKrazy · « **Reply #15 on:** February 04, 2008, 08:45:46 PM »

THe kit moves it to the rearmost hole and provides a plug for the middle hole

FlatoutKrazy · « **Reply #16 on:** February 04, 2008, 08:46:31 PM »

another angle

FlatoutKrazy · « **Reply #17 on:** February 04, 2008, 08:47:49 PM »

the detachable sissy installed

FlatoutKrazy · « **Reply #18 on:** February 04, 2008, 08:48:51 PM »

now to the exhaust and intake. first a shot of the bike with the stock exhaust and intake removed

FlatoutKrazy · « **Reply #19 on:** February 04, 2008, 08:49:46 PM »

Right side was the easy one

FlatoutKrazy · « **Reply #20 on:** February 04, 2008, 08:50:24 PM »

muffler

FlatoutKrazy · « **Reply #21 on:** February 04, 2008, 08:51:05 PM »

slash cut tip

FlatoutKrazy · « **Reply #22 on:** February 04, 2008, 08:52:36 PM »

left side was more involved. 2 extra clamps and an extra bracket.
header pipe just goes across to left side

FlatoutKrazy · « **Reply #23 on:** February 04, 2008, 08:56:05 PM »

next pipe clamps to header (first extra clamp), goes backwards, down, then backwards to the muffler clamp.

FlatoutKrazy · « **Reply #24 on:** February 04, 2008, 08:57:19 PM »

The 2nd extra clamp and the extra mounting bracket go where the pipe goes up and down. The extra bracket bolts to the rear foot peg mount hole.

FlatoutKrazy · « **Reply #25 on:** February 04, 2008, 08:58:21 PM »

left side muffler and slash down

FlatoutKrazy · « **Reply #26 on:** February 04, 2008, 08:59:08 PM »

rear aeleron boards

FlatoutKrazy · « **Reply #27 on:** February 04, 2008, 08:59:34 PM »

and again

FlatoutKrazy · « **Reply #28 on:** February 04, 2008, 09:00:39 PM »

big air intake

FlatoutKrazy · « **Reply #29 on:** February 04, 2008, 09:01:06 PM »

another shot