www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Throttle body replacement  (Read 1533 times)

0 Members and 1 Guest are viewing this topic.

gearida

  • Laugh until the light turns green!
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 74

    • CVO1: 2012 Ultra Classic
Throttle body replacement
« on: October 07, 2012, 09:51:43 PM »
My little brother has broken off an aircleaner plate bolt in the throttle body and after many hours failure has caused us to buy a new throotle body. Probably will buy the stock unit, but does he have any small upgrade choices? 103 in a 2011 Utra Limited. Thanks.
Logged
Custom built bikes by GearHead Cycles.
2012 CVO Ultra

prodrag1320

  • AMRA & AHDRA P/D record holder
  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 917
Re: Throttle body replacement
« Reply #1 on: October 08, 2012, 07:23:05 AM »
if your not doing any headwork,your better off with the stock unit
Logged

hogasm

  • Guest
Re: Throttle body replacement
« Reply #2 on: October 08, 2012, 09:26:52 AM »
Call HP Inc and tell them your situation. They should be able to remove the broke screw and bore out the TB if you want it larger. If not there are some for sale on Ebay
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6708

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Throttle body replacement
« Reply #3 on: October 08, 2012, 10:01:51 AM »
Brian,

Don't believe the 10's and 11's were boreable that is why they came out with the 55mm where they take the electronics from your throttlebodies and sell you a 55mm  and put your electronics in it.    If memory serves me thought only the 08,09 were boreable and then they cut the backs off and put on a larger intake manifold.
« Last Edit: October 08, 2012, 10:22:33 AM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

gearida

  • Laugh until the light turns green!
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 74

    • CVO1: 2012 Ultra Classic
Re: Throttle body replacement
« Reply #4 on: October 08, 2012, 03:37:59 PM »
Ordered factory set up, not too bad in price tag. I spent that much time in labor trying to fix it, drill bit broke off inside broken stud which caused me to eat my lunch on it. Duh... :oops:
Logged
Custom built bikes by GearHead Cycles.
2012 CVO Ultra

hogasm

  • Guest
Re: Throttle body replacement
« Reply #5 on: October 08, 2012, 05:52:43 PM »
Quote from: Unbalanced on October 08, 2012, 10:01:51 AM
Brian,

Don't believe the 10's and 11's were boreable that is why they came out with the 55mm where they take the electronics from your throttlebodies and sell you a 55mm  and put your electronics in it.    If memory serves me thought only the 08,09 were boreable and then they cut the backs off and put on a larger intake manifold.

Forgot to read the fine print :oops:
Logged

hogasm

  • Guest
Re: Throttle body replacement
« Reply #6 on: October 08, 2012, 07:55:01 PM »
Quote from: Unbalanced on October 08, 2012, 10:01:51 AM
Brian,

Don't believe the 10's and 11's were boreable that is why they came out with the 55mm where they take the electronics from your throttlebodies and sell you a 55mm  and put your electronics in it.    If memory serves me thought only the 08,09 were boreable and then they cut the backs off and put on a larger intake manifold.

Did a little research http://www.fuelmotousa.com/throttlebody.htm  not a bad price either
Logged
 

Page created in 0.134 seconds with 21 queries.