Thanks for the input. I already watched the video, have done exactly what they say. Im not on the bike, dont even touch it, i quickly turn ign on & instantly push both turn signals. Now, my speedometer/tach is different than video. I have factory CVO speed/tach combo. As soon as i try this, alarm instantly beeps. No change on speedo to put 5 digit code. Tried goin super fast also waited 1 sec, no difference. Tried turning key to ACC as well to try..... no luck !!!
I have a video on my phone of ME doing the little song and dance to get it started without the fob. I have had the fob near the bike in the garage......started it....went for a two hour ride....stopped for fuel...and find out I don't have a fob!!did the same thing. hanging on a coat hangar near bike in garage. stopped at an overlook. oh well!! :-\
yes just replaced fob battery.
Keep holding the turn signals. It looks like you're letting go too soon.
"Quickly (within 2 seconds of turning ignition switch) hold both turn signal switches in until confirmation."
The chirps are not the alarm going off, they are a pre-alarm warning.
"Once armed, if the motorcycle is moved or lifted up off of its jiffy stand or if the ignition switch is turned to IGNITION and the fob is not present, the alarm will warn the operator with three alternate flashes of the turn signals and a chirp of the optional siren."
Yes Jerry, I tried "on off on off on" then turn signals. Alarm beeps instantly. Thanks but still nothing.
...............................................
Starting to believe my HFSM/TSM could be faulty. Maybe module was never programmed all the way? Defect from module manufactuerer??
Just curious, & maybe it doesnt matter, but do any of you have the same speedometer/tach that i do??? I havent seen any other bikes with the same as mine.
FINALLY, figured it out.
After turning ign on, press both turn signals fast & realease, dont press & hold like manual says, holding turn signals in makes alarm go off.
I turned ign & lightning fast pushed both turn signals & released fast, ability to enter code popped up. I entered code & it worked!