www.CVOHARLEY.com

CVO Technical => Intake/Exhaust/ECM => Topic started by: Davermag on February 22, 2019, 04:11:44 PM

Title: SE products
Post by: Davermag on February 22, 2019, 04:11:44 PM
Greetings...so I realize this is only my 2nd post lol, but I felt this would be worth posting. So I just picked my 2019 CVO SG in Nov. I wanted to open her up a little, but due to all the engine issues, stay with OEM. So I purchased the SE High Flow Exhaust system (which comes w/o the cat) and the new High Flow Street Cannons (where each comes with the high flow cat). I also added the SE Tuner, but at the last minute I picked the all new SE Ventilator Extreme air cleaner which comes with the K&N filter. So I was trying to achieve some more torque, HP and some sound. I can tell you that I achieved all three!! As it has great acceleration with what I feel is plenty of power.
I understand that there other ways to go; aftermarket, but I really wanted to give this a try.  So I went from 89Hp and 104ft/lbs to 102Hp and 115ft/lbs. Plus the sound is worthy so I think if someone wanted to stay within the warranty and such, that this is a pretty good way to go. I have attached the dyno sheet as well...I hope lol

Ride with Pride Electraglide!
Title: Re: SE products
Post by: bisounours on February 22, 2019, 04:45:30 PM
Nice !
With the SE tuner, what base map do you've loaded ?
How do you've adjusted the base MAP ?

Thanks
Title: Re: SE products
Post by: fastfreddy on February 22, 2019, 05:49:01 PM
welcome to the site , and can I ask what was the cost of all the SE parts. also would be nice if HD would take the RPMs up a lill higher.... who really wants limits on their bike
Title: Re: SE products
Post by: Davermag on February 23, 2019, 09:59:53 AM
Freddy
The SE High Flow exhaust system is prt #64800062 satin black $1500.00, which includes the new High Flow Street Cannons;  SE tuner $299.00. As far as the new air cleaner I can use my existing backing plate so all I had to buy was the K&N filter $94.00 and
 the Ventilator Extreme Air Cleaner Cover prt #61300994 $169.00
I bought everything on Black Friday so I could get my dealers FREE Labor. Added a pic of the filter setup
I'm telling ya, it runs like a champ!
Title: Re: SE products
Post by: wiliturk on February 25, 2019, 10:02:39 PM
I've wondered about the hiflow exhaust. Moving the cat to the mufflers must help.
Title: Re: SE products
Post by: Alex_McB on March 03, 2019, 04:14:38 AM
Nice Stage 1 and numbers increase.

I really like Your new Air Intake.
On my 2017 CVO Street Glide I have a Screamin Eagle Ventilator (chrome version).

If I well understood I just need to purchase the new KN filter (part number 29400400) and the new Extreme Cover (part number 61300993 for the chrome version) because I can use the base plate of my Ventilator air filter.
Is it correct?
Title: Re: SE products
Post by: Mofo67 on March 03, 2019, 07:23:30 AM
Nice set up, one other thought is adding the HD auto tuner with wide band O2 sensors. I ran a similar set up on my ‘17 CVO Limited and ‘18 RGS. I had the S&S full exhaust with hi-flow cats in the mufflers and used the SEPST and HD auto tuner. 50 state compliant and keeps HD happy.
Enjoy the ride....
Title: Re: SE products
Post by: Phreakyz on March 03, 2019, 08:20:17 AM
 Would you be willing to post a picture of the bike with all of the stuff on it?     Would love to see how it looks.   
Title: Re: SE products
Post by: Davermag on March 12, 2019, 12:44:27 PM
Here's some photos
Title: Re: SE products
Post by: Davermag on March 12, 2019, 12:45:28 PM
here's another photo
Title: Re: SE products
Post by: Davermag on March 12, 2019, 12:55:02 PM
last full pic...
Title: Re: SE products
Post by: FLSTFI Dave on March 16, 2019, 08:24:10 AM
I do like that air cleaner.  Looks like it should provide plenty of air.
Title: Re: SE products
Post by: Twism_23 on March 22, 2019, 09:39:32 AM
I really like the looks of that air cleaner. Currently running a Trask Air Assault but with the blow back from these engines have I need to clean the glass every once in a while which is a hassle.