Topic: increase rocker arm ratio???? (Read 1388 times)

timtoolman · « **on:** February 21, 2010, 08:57:04 AM »

im doing a 96 to a 106 build (s&s kit becsuse liner is thicker). i have a andrews 54h already in it, question is i thought of installing s.e. incresased ratio rockers for just a little more lift, will the stock springs work? the are good to .600 lift. i think the final lift would be around 585???

HD Street Performance · « **Reply #1 on:** February 21, 2010, 10:08:19 AM »

I have run Woods 5s with stock springs @ .575 and those lobes are more agressive, but they were shimmed to 145# on the seat.

timtoolman · « **Reply #2 on:** February 21, 2010, 10:49:34 AM »

ok so what would u do? i do have a woods 400-6 with 650 lift but that is for another time when i get you to do the heads for that cam, but for now would the rocker arm work ok on the stock heads? for what i want now?

HD Street Performance · « **Reply #3 on:** February 21, 2010, 11:31:54 AM »

Probably fine, be sure to check piston to valve clearance.

Author Topic: increase rocker arm ratio???? (Read 1388 times)

timtoolman

increase rocker arm ratio????

HD Street Performance

Re: increase rocker arm ratio????

timtoolman

Re: increase rocker arm ratio????

HD Street Performance

Re: increase rocker arm ratio????