Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 4 [All]

Author Topic: another birth in the making...  (Read 6064 times)

0 Members and 1 Guest are viewing this topic.

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
another birth in the making...
« on: September 05, 2008, 07:56:00 PM »

Well after all the delays and another one these last couple days my Silver SERG will be here at 9:30 tomorrow morning!!!  I will go down for the birth and then they will PDA it and I'll ride it home tomorrow afternoon....the long way!   Will finally quit drooling over everyone else's here that was kind enough to share pics and post remarks   :bananarock: :bananarock:   :2vrolijk_21:  I will post pics but it already looks like we have it covered.  How bout one of me with a sh!t eating grin........
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Sierramadre

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 537
  • "Badges? We don't need no stinkin' badges!"
Re: another birth in the making...
« Reply #1 on: September 05, 2008, 08:17:56 PM »


Awesome.  You're gonna love it.  Be sure they check the air pressure in the rear shocks.  Mine was delivered with zero which explained the rough ride at first.
Logged

planenut

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1457
  • life is short enjoy the ride
    • NJ


    • CVO1: 2022 Road glide Limited Wicked orange Pearl and Blackhole
    • CVO2: 18 115 cvo limited anniversary #1068(sold)
    • CVO3: 15 cvo Limited Maroon and silver (sold)
Re: another birth in the making...
« Reply #2 on: September 05, 2008, 10:30:02 PM »

 :2vrolijk_21: :2vrolijk_21: :bananarock: :worthless: :worthless: :worthless: :worthless: :worthless:
Logged
Fullsac headpipe TAb Performance 4.5 slash 2.5 baffles
SERT program   horsepower hd cam
freedom shields 13 in
Custom Dynamics full lighting Ft and rear
Soundz 6 speaker set up 1k amp
Legends Axeo ft and Revo A in rear

SBB

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 16404
  • Go fast or go home! EBCM member # 2.36 .01%
    • CVO2: 2011.5 SEUC
    • CVO3: 2012 SERG
Re: another birth in the making...
« Reply #3 on: September 05, 2008, 10:34:14 PM »

Well after all the delays and another one these last couple days my Silver SERG will be here at 9:30 tomorrow morning!!!  I will go down for the birth and then they will PDA it and I'll ride it home tomorrow afternoon....the long way!   Will finally quit drooling over everyone else's here that was kind enough to share pics and post remarks   :bananarock: :bananarock:   :2vrolijk_21:  I will post pics but it already looks like we have it covered.  How bout one of me with a sh!t eating grin........

Congrats sblair!

Give us all the details Saturday!

 :2vrolijk_21:
Logged

2012      SERG  "Nu Blue"
2018      Goldwing   
2003      HD Electra Glide Classic Silver and Black, of course!                
2 2012   Suzuki Burgmans
2018      Shelby GT350, 963 crank hp, 825 rear wheel hp

HogDude

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1327

    • CVO1: Gone-05 SEEG2(never should have let her go)
    • CVO2: 2013 CVO Road King
Re: another birth in the making...
« Reply #4 on: September 05, 2008, 10:42:48 PM »

Congrats... try to get a couple of hrs. sleep.  :2vrolijk_21:
Logged

Guilty

  • Got Dead?
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 996
Re: another birth in the making...
« Reply #5 on: September 06, 2008, 12:02:45 AM »

Who said that we have enough pictures? Enjoy your ride tomorrow and post some pics of your first ride.
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #6 on: September 06, 2008, 02:20:00 PM »

Out of the womb
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #7 on: September 06, 2008, 02:20:47 PM »

Shedding the protection
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #8 on: September 06, 2008, 02:21:44 PM »

out in the sun
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #9 on: September 06, 2008, 02:23:00 PM »

Last one this morning.  More to come when I pick her up this afternoon.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #10 on: September 06, 2008, 02:23:36 PM »

OK, 1 more.....
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: another birth in the making...
« Reply #11 on: September 06, 2008, 06:21:02 PM »

beautiful bike! Hope you've enjoyed riding it home by now. Ride safe!
Logged

planenut

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1457
  • life is short enjoy the ride
    • NJ


    • CVO1: 2022 Road glide Limited Wicked orange Pearl and Blackhole
    • CVO2: 18 115 cvo limited anniversary #1068(sold)
    • CVO3: 15 cvo Limited Maroon and silver (sold)
Re: another birth in the making...
« Reply #12 on: September 06, 2008, 09:39:35 PM »

thanks for the pics keep them comming :2vrolijk_21:



good luck :bananarock: :bananarock: safe riding


jon
Logged
Fullsac headpipe TAb Performance 4.5 slash 2.5 baffles
SERT program   horsepower hd cam
freedom shields 13 in
Custom Dynamics full lighting Ft and rear
Soundz 6 speaker set up 1k amp
Legends Axeo ft and Revo A in rear

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #13 on: September 06, 2008, 11:11:38 PM »

Here are some from picking it up
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #14 on: September 06, 2008, 11:12:25 PM »

Thanks buyearly and planenut!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

HogDude

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1327

    • CVO1: Gone-05 SEEG2(never should have let her go)
    • CVO2: 2013 CVO Road King
Re: another birth in the making...
« Reply #15 on: September 06, 2008, 11:15:06 PM »

Looks great !  :2vrolijk_21: Enjoy
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #16 on: September 06, 2008, 11:16:12 PM »

one more for the night.  Went for a short ride then pulled it in the garage and pulled off all the reflectors.  Just scoured the rear one with a util knofe and then broke it off.  On the others I heated them up with a hot gun and then used fishing wire attached to 2 bolts and sheared them off.  Finished it off with goof off on a rag and wax.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #17 on: September 06, 2008, 11:23:37 PM »

A ride report for the short trip.  It handles much better than my 06 RG.  Feels light and responsive.  Like others have reported, the throttle is sensitive.  The ride is a little stiffer than my other one but I did not check shock pressure.  The seat is pretty damn firm probably because its a low profile.  I am 5'6" and I sit on it flat footed with no room to spare.  The handlebars feel normal to me but then again I'm used to my other RG's standard bars which I tilted forward just a bit so for me my arms are slightly bent.  Just a couple miles and I'm over 50.  Tomorrow I'll be out there so I'll report more.  Need to take the jeep back to the dealer..all my parts are here except the tour pack and lock.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Guilty

  • Got Dead?
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 996
Re: another birth in the making...
« Reply #18 on: September 07, 2008, 12:04:36 AM »

Beautiful...enjoy the ride!
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #19 on: September 07, 2008, 07:01:56 AM »

Thanks Guilty!  Same to you on your new orange SERG!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

customryder

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 365
  • I'LL be your Huckelberry.

    • CVO1: fxr4 2000 orange
    • CVO2: flhtcse 2004 blue/black
    • CVO3: CVO3 2005 elecrta glide CVO4 2009 roaglide CVO5 2012 roadglide skunk CVO6 2013 cvo roadglide atomic orange
Re: another birth in the making...
« Reply #20 on: September 07, 2008, 10:52:01 AM »

Congrats! post more pic!
Logged
2009 cvo road glide...2007 streetglide...................... cvo member #513
2009 f-350 Harley edt.

just-us-6

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 149
  • FLHRSEI.ORG
Re: another birth in the making...
« Reply #21 on: September 08, 2008, 02:36:59 PM »

Congrats on the new ride, It looks great!
Logged
2009 SERG Orange - Heavy breather, catless headpipe, fullsac 2.25", Cyclerama heads, T-man 625 cams, Chrome inner primary, diamond cut heads and cylinders, Hawgwired amp and speakers, Xenon Hid headlights, Led front turn signals, passenger foot boards and pegs moved to crash bars, chopped tour pack, remote alarm, Harley radar detector, SE Pro tuner, Cee Bailey Windshield, VPC clutch, front saddlebag guards, dash oil temp gauge, led spoilers for saddlebags and tourpack, reflectors removed!

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Re: another birth in the making...
« Reply #22 on: September 08, 2008, 02:44:57 PM »

Oh yeah!  Fine job, best of luck, classy silver bike...
Logged

Hugh Janis

  • Jim
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6121

    • CVO1: FLHTCUSE2 Cherry and Black
Re: another birth in the making...
« Reply #23 on: September 08, 2008, 03:06:50 PM »

THAT, my friend is a sweet looking ride!  Thanks for the pics and report.  Congratulations on the bike!
Logged
"I don't mind coming to work,
But that eight hour wait to go home is a bitch."

Click link for BBQ song..   http://www.collegehumor.com/video:1825742

amigo Jorge

  • LDR #00372
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7176
    • FL


    • CVO1: '20 FLHTCUTGSE Trike CVO
Re: another birth in the making...
« Reply #24 on: September 08, 2008, 04:18:53 PM »

Congrats for the new bike....it looks great  :2vrolijk_21:
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #25 on: September 08, 2008, 06:02:25 PM »

Here's a pic with the new docking hardware for the rack or tourpack.  Very easy to install!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #26 on: September 08, 2008, 06:03:38 PM »

And here's one of the rider backrest,
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #27 on: September 08, 2008, 06:05:06 PM »

Did I tell you I really love the rear end...but then again I'm a butt man through and through!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32641
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: another birth in the making...
« Reply #28 on: September 08, 2008, 06:13:18 PM »

Did I tell you I really love the rear end...but then again I'm a butt man through and through!
Just thinking out loud here... Wonder how a frenched in license plate w/self illumination (so you wouldn't have to have that light sticking out) would look on the rear fender? I think that would really clean up the fender of that bike. The more and more I look, the more and more I'm liking the rear on the SERG (not that I ever disliked it). :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #29 on: September 08, 2008, 06:17:53 PM »

So I've got over 250 miles on her and thought I'd update on a couple things.  First off, someone previousle in another thread complained about intake noise and starving for air.  NOPE, it's a hi flow intake and it sounds just like all my other vehicles when you romp on it and it starts sucking air.  The seat is still hard and the wife complained...   The suspension is quite different from previous models and you need to run more air.  Typically on my other RG I run 14 psi with the wife and tour pack.  On this one just with the wife it feels like its bottoming out.  I pumped it up to 20 today and it felt much better than yesterday.  I'll put the wife on it later and see how that does.  This bike is more like a ferrari.  Suspension is very tight but it likes to go fast in the corners.
  Now for the KW 12" windshield.  At 70 I can start to feel the helmet buffet.  I'm only 5'6" so some of you taller folks beware.  There is some wind noise.. more than with my Clearview on the other RG but no where near what it was on the Dyna.  Have not made up my mind about the KW.  Still open for other suggestions.
  One last thing, and I will post it separately also is when I was installing the docking kit for the tour pack, I was also going to install the antenna relocation kit.  Well, its not going to work in its present state.  The supplied bracket will work on everything but the SERG.  The L tail light is in the way.  So I sat there and contemplated for a few minutes.  
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

SBB

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 16404
  • Go fast or go home! EBCM member # 2.36 .01%
    • CVO2: 2011.5 SEUC
    • CVO3: 2012 SERG
Re: another birth in the making...
« Reply #30 on: September 08, 2008, 06:20:26 PM »

Just thinking out loud here... Wonder how a frenched in license plate w/self illumination (so you wouldn't have to have that light sticking out) would look on the rear fender? I think that would really clean up the fender of that bike. The more and more I look, the more and more I'm liking the rear on the SERG (not that I ever disliked it). :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Hows this for what your looking for dOOd?


Logged

2012      SERG  "Nu Blue"
2018      Goldwing   
2003      HD Electra Glide Classic Silver and Black, of course!                
2 2012   Suzuki Burgmans
2018      Shelby GT350, 963 crank hp, 825 rear wheel hp

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #31 on: September 08, 2008, 06:21:05 PM »

   Well, you need the rest of the hardware but so I just bent the existing bracket ever so slightly so the antenna adapter will screw on and I re-adjusted the original connector to get a couple more threads on top.  The only issue with this is you will have to pull out the L saddlebag to connect it when you put on the tour pack.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #32 on: September 08, 2008, 06:34:05 PM »

d00d;
  It would look really awesome if we could just figure out how not to screw up the paint.  I have not looked into it to read the details.  Might have to check it out....
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32641
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: another birth in the making...
« Reply #33 on: September 08, 2008, 06:40:06 PM »

Hows this for what your looking for dOOd?



Something like that I think might really clean up the back of the SERG. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #34 on: September 08, 2008, 06:43:14 PM »

you know it might be alright but...I really hate the french!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32641
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: another birth in the making...
« Reply #35 on: September 08, 2008, 06:44:56 PM »

you know it might be alright but...I really hate the french!
You can call it something else then. ;) ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

MikeD

  • Guest
Re: another birth in the making...
« Reply #36 on: September 08, 2008, 08:33:54 PM »

Here's a pic with the new docking hardware for the rack or tourpack.  Very easy to install!

Didn't you have to bend it up?
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #37 on: September 08, 2008, 11:41:58 PM »

Mike;
  Bend what up?  The docking kit went on picture perfect.  The ant mount I bent the lower horizontal part down just a hair and now the ant leans to the left slightly in preparation for the adapter you need to install to hook up the ant cable coming from the tour pack.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

MikeD

  • Guest
Re: another birth in the making...
« Reply #38 on: September 09, 2008, 06:32:05 AM »

Ok, I get it now.  I did see that there was an antenna relocation kit that I turned down when I bought the mounting hardware, only because I want a ghost antenna.
Logged

GregKhougaz

  • It's a Two Wheeled World.
  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 9543
    • CA


    • CVO1: '22 BMW Grand America
    • CVO2: '18 Porsche C4 GTS
    • CVO3: '22 Porsche Macan GTS and my mountain bike.
Re: another birth in the making...
« Reply #39 on: September 09, 2008, 12:06:41 PM »

Sblair, Beautiful bike and congratulations!  Yours too, MikeD.  The rest of us keep waiting....

MikeD is right.   Why do the antenna relocation when you can put a powered antenna inside the fairing?  Ghost Antenna:  Dakota Digital  P/N: DS-250034, about $68,  The HD Antenna Relocation Kit P/N 76556-09 is the same price and does not help your reception.... Nor does it help the appearance.  Just thinkin' out loud, so to speak.  I used this on my 04 RG and it worked great.  Since you do have to remove the fairing, a pair of J&M speakers is about a 200% improvement for another $109.  Both are a very easy install. 
 
Logged


"We've got some tall tales we love to tell.  They may not be true but we sure do remember them well." 
 Sawyer Brown

When you come to a fork in the road... take it!

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #40 on: September 09, 2008, 04:34:41 PM »

HMMM, thanks for the great info.  I'll have to check into these mods!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

MikeD

  • Guest
Re: another birth in the making...
« Reply #41 on: September 09, 2008, 06:06:01 PM »

Sblair, Beautiful bike and congratulations!  Yours too, MikeD.  The rest of us keep waiting....

MikeD is right.   Why do the antenna relocation when you can put a powered antenna inside the fairing?  Ghost Antenna:  Dakota Digital  P/N: DS-250034, about $68,  The HD Antenna Relocation Kit P/N 76556-09 is the same price and does not help your reception.... Nor does it help the appearance.  Just thinkin' out loud, so to speak.  I used this on my 04 RG and it worked great.  Since you do have to remove the fairing, a pair of J&M speakers is about a 200% improvement for another $109.  Both are a very easy install. 
 

Yea, I'm going for the whole thing when the tour pack comes in.  I'm gonna do the hidden antenna, and hawg wired speakers / amp.
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #42 on: September 10, 2008, 04:00:38 PM »

Well, I just bought the J&M's and pulling the trigger on the Dakota Digital.  I'll send the relocation kit back and keep the tour pack clean.  Thanks for the info.... now what about pipes and a download??????  and I have this little rash.........
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

GregKhougaz

  • It's a Two Wheeled World.
  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 9543
    • CA


    • CVO1: '22 BMW Grand America
    • CVO2: '18 Porsche C4 GTS
    • CVO3: '22 Porsche Macan GTS and my mountain bike.
Re: another birth in the making...
« Reply #43 on: September 10, 2008, 04:34:32 PM »

Don't touch it!  The rash, that is.
Logged


"We've got some tall tales we love to tell.  They may not be true but we sure do remember them well." 
 Sawyer Brown

When you come to a fork in the road... take it!

Greaseball

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 87
Re: another birth in the making...
« Reply #44 on: September 10, 2008, 09:15:29 PM »

and I have this little rash.........


Can we get back to trashing the French??
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #45 on: September 12, 2008, 04:28:26 PM »

LOL...    While flying to Libya...ooops my nuke let go and we are right over France!!!   bummer.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

bribe36

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 874

    • CVO1: 2009 SERG
Re: another birth in the making...
« Reply #46 on: September 27, 2008, 11:59:44 PM »

Great looking bike, enjoy
Logged

Smiler

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1009
Re: another birth in the making...
« Reply #47 on: September 28, 2008, 02:53:08 PM »

That's a beautiful bike, does anyone have a yellow version?

Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: another birth in the making...
« Reply #48 on: September 29, 2008, 09:55:18 PM »

I think 1 person has picked a yellow one up.  Have not seen any pics yet.  More yellow ones should be hitting the dealers any time!!!
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Re: another birth in the making...
« Reply #49 on: September 29, 2008, 10:25:20 PM »

Congratulations...Sweet and classy ride there !
Logged

MikeD

  • Guest
Re: another birth in the making...
« Reply #50 on: September 30, 2008, 06:18:56 AM »

I think 1 person has picked a yellow one up.  Have not seen any pics yet.  More yellow ones should be hitting the dealers any time!!!

Definitely interested in seeing the yellow, especially outside.  The yellow pearl has always been a great color.
Logged

ccr

  • SEEG Cult Senior Member
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6352
Re: another birth in the making...
« Reply #51 on: September 30, 2008, 06:47:41 AM »

Looking fantastic.  Seeing MikeD's RG this last weekend makes you enjoy it even more.  Great looking bike. Congratulations.  :cherry:
Logged

Smiler

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1009
Re: another birth in the making...
« Reply #52 on: September 30, 2008, 04:38:36 PM »

I think 1 person has picked a yellow one up.  Have not seen any pics yet.  More yellow ones should be hitting the dealers any time!!!

Come on my old love, at this stage I shouldn't really need to ask......               :worthless: :worthless: :worthless: :worthless: :worthless: :worthless: :worthless: :worthless: :worthless: :worthless: :worthless:


Logged

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6731

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: another birth in the making...
« Reply #53 on: October 03, 2008, 11:31:40 AM »

Great looking Sliver SERG

I have yet to see one in person, I bet it looks better than the pics.

I saw a Orange one at the Tunder Beach rally, and it looks better in person than the pics.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,
Pages: 1 2 3 4 [All]
 

Page created in 0.233 seconds with 21 queries.