Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Iglide]

After gettin all the parts together (some not supplied with the kits), I believe this is what is needed to install the passanger floorboards and move the passanger pegs up to rider highway pegs.

Thanks to you who posted the necessary parts!

[Iglide]

Here's some pics of em mounted...

[Iglide]

more stuff:

[Iglide]

And more:

[Screamin]

Looks good I.

[roady]

That looks good. That is the way it should have come from the factory. Oh but wait Harley wouldnt make even more money off of us. My parts should be here by the end of the week to do mine.

[Iglide]

Thanks for the comments!

The bright side: The parts I received are "top shelf". Very heavy, substantial, the fit is perfect... So many aftermarket parts from other manufact's ... well.... don't exactly fit, line up; and you are forced to "Make It Work".

These MOCO parts are nice, the chrome is perfect and everything fits as it should. The directions aren't always right and some times you don't get the right stuff...., but this time it all worked out!

[MikeD]

Thanks for the comments!

The bright side: The parts I received are "top shelf". Very heavy, substantial, the fit is perfect... So many aftermarket parts from other manufact's ... well.... don't exactly fit, line up; and you are forced to "Make It Work".

These MOCO parts are nice, the chrome is perfect and everything fits as it should. The directions aren't always right and some times you don't get the right stuff...., but this time it all worked out!

Amen Brother!!! Did the rumble collection floor boards come as a set?

[MikeD]

You know, looking at the picture, I was reminded that HD sells the rear passenger foot board as a "kit."  Kit my @ss!!! I had to go back and get the springs and balls.

[Iglide]

No it just wasn't that easy. Not a set in the way I would think.

Some of the boxes were  marked as "kits", but that only means more than one part and not necessarily all you need to install that.

I needed floorboard pans, floorboard inserts, floorboard mounting brackets, and then some small parts to put it together: steel balls, springs, and 4 pivot pins.

The short angle offsets for the highway pegs were complete, but that passanger stuff is all bought in pieces as far as I can tell. It's all good stuff though no complaints there.

I believe this all started on your thread Mike, thanks I am very happy with the results.

[roady]

Mike

I got all the parts I thought I needed then. Can you please post the part numbers needed for the springs and balls.

Thanks

[MikeD]

Mike

I got all the parts I thought I needed then. Can you please post the part numbers needed for the springs and balls.

Thanks

Roady, I'll get you those in the am, going to HD.  I'll get the number for you.  I'm going to try to get the Rumble passenger floor boards.  Also the wife can't live with  the seat on the longer rides, which she never complains about riding.  So, I'm going to way out my options. 

[Iglide]

See if your numbers match these:
Don't forget the hinge pins you will need 4

[tlr]

Looks great.  I thought that the rumble collection was not available yet.  I have looked at HD.com and did a search here.  what gives and can you supply the part numbers for them.  Thanks, Ted

[Iglide]

This is basically matching up a bunch of parts, the Rumble Collection part is the floorboard inserts. You will also need the Pans,(there are several to choose from) that's what the floorboards fit down into. Then, the pans attach to the brackets that mount to the frame. In order to attach the pans to the mount brackets you will need the pivot pins, springs, and balls.

Here's the Rumble inserts:

The following are the part numbers for the swept wing (passenger) rumble collection footboard inserts:
51502-09
51510-09
right side/left side...I don't know which is right/left though.
MSRP - $109.09 each