www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: O2 sensors  (Read 2663 times)

0 Members and 1 Guest are viewing this topic.

burbey

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
O2 sensors
« on: February 23, 2012, 07:16:29 PM »
Is there an easy way to identify what o2 sensor is tied to each cylinder?  I don't think I swapped them when I did my exhaust but want to be 100% sure they are correct?
Logged

Lever

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1482
  • keep the rubber side down
Re: O2 sensors
« Reply #1 on: February 23, 2012, 07:27:34 PM »
i thought the pigtails are colored coated  ....black and greyish 
if so i think black is back cyl.  but i maybe wrong 
Logged
2010 CVO Convertible  crimson red sunglo/Autumn Haze with Metal Grind Graphics
2014 113  motor 10.8 compression
SAE smoothing #5  125.7 hp / 122.9 tq
2017 Road King M8
stage IV

xsdbs

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 158
  • 2012 CVO Street Glide
    • Vincent's Web Page
Re: O2 sensors
« Reply #2 on: February 23, 2012, 08:23:21 PM »
Quote from: burbey on February 23, 2012, 07:16:29 PM
Is there an easy way to identify what o2 sensor is tied to each cylinder?

There is a letter "B" next to the rear cylinder 02 hole, which matches to the black 02 wiring harness connector.
There is a letter "G" next to the front cylinder 02 hole, which matches to the gray(grey) 02 wiring harness connector.

 
« Last Edit: February 24, 2012, 03:20:13 PM by xsdbs »
Logged

AXIL

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2579
Re: O2 sensors
« Reply #3 on: February 23, 2012, 08:44:46 PM »
   What year bike?
Logged
I CAME INTO THIS WORLD WITH NOTHING AND I GOT MOST OF IT LEFT  
AHH,MOONSHINE THE OTHER WHITE MEAT

burbey

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: O2 sensors
« Reply #4 on: February 23, 2012, 09:27:51 PM »
2012 street glide
Logged

Steve Cole

  • Manufacturer TTS
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1430
Re: O2 sensors
« Reply #5 on: February 24, 2012, 01:32:42 PM »
Follow the O2 sensor to the end of the wire and look at the color of the plug. As said above BLACK is Back Cylinder.
Logged
The Best you know, is the Best you've had........ not necessarily the Best.

burbey

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: O2 sensors
« Reply #6 on: February 24, 2012, 03:29:52 PM »
Good thing I checked they were swapped.  Thanks guys!
Logged
 

Page created in 0.125 seconds with 25 queries.