www.CVOHARLEY.com
CVO Technical => Electronic Toys and Gadgets => Topic started by: naitram on June 23, 2005, 11:25:50 AM
-
i just got my Garmin Quest in today, i havent decided how i'm going to mount it yet but i'm interested in a comparison of what i recieved to what you get from H-D.
WFP, can you take a couple of pics of the cradle that came with yours? i'll do the same with mine. if they are interchangeable you can save a lot of money by getting the garmin unit
-
I have these two from my previous post, let me know if you want a different angle:
(http://flhrsei.org/attachments/2-removablemount.JPG)
(http://flhrsei.org/attachments/1-fixedbase.JPG)
-
I have these two from my previous post, let me know if you want a different angle:
(http://flhrsei.org/attachments/2-removablemount.JPG)
(http://flhrsei.org/attachments/1-fixedbase.JPG)
do you have a shot of the back of the cradle?
-
do you have a shot of the back of the cradle?
No, will see what I can do when I get home. Took a long trip today to Northampton for work. Mine worked flawlessly and I am becoming dependent upon having it! True speed (70 when the speedo reads 73)..especially passing a cop with my radar detector blasting a laser detection when I was doin' 82 on the GPS.
It is 3-d trapezoidal in the back and slides in the fixed base where there are the 4 connectors and 2 pins.
/Bill
-
i also bought the motorcycle kit and a handlebar kit, not sure which i'll end up using,
i'll be curious when HD updates the dealer db if i'll be able to load it up
-
also not sure if you saw it but ther's a software update available as of last week
http://www.garmin.com/support/collection.jsp?product=010-00306-00
-
i also bought the motorcycle kit and a handlebar kit, not sure which i'll end up using,
i'll be curious when HD updates the dealer db if i'll be able to load it up
I also hope that it is loadable in the Mapsource program so that when planning a trip on the computer, they are available as stops. I have already loaded many in Streets & trips, but this would be better.
-
.
-
.
-
.
-
motorcycle mount and handlebar mount front sides
-
back sides
-
Note, there was a Jun 14, 2005 Software update...some power issues:
http://www.garmin.com/support/download_details.jsp?id=615
-
I need to modify the 120v indoor cradle I have. I want to be able to add the garmin external Antenna for indoors use. The current mount allows usb connection, which I just used to update the firmware but it blocks the external antenna connector.
/Bill
-
also not sure if you saw it but ther's a software update available as of last week
http://www.garmin.com/support/collection.jsp?product=010-00306-00
you mean this update [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]
i also signed up for notifications of updates
-
I need to modify the 120v indoor cradle I have. I want to be able to add the garmin external Antenna for indoors use. The current mount allows usb connection, which I just used to update the firmware but it blocks the external antenna connector.
/Bill
the "charger" mount that came with mine allows access to both ports
-
you mean this update [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif] [smiley=huepfenjump3.gif]
i also signed up for notifications of updates
GEEK !!
(yeah, I know, me too)