Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roadrunner]

I had the dealer install the bars while rebuilding my bike, and the tech said he had to lenghten the control wires to the bars 3 inches (about 32 wires).  I hadn't read anyone having to extend the wires.  Does this sound right?  He did run the wires inside the handlebars.  Thanks

[MObe]

I have put these bars on 2 seegs, an 04 and an 05 and did not have to lengthen the wires on either.......Mike
 

[ccr]

Your mechanic that ran the wires was either lazy or you got jacked.

Mike

Thanks MFG, just reminded me that I got ripped off again, on my stainless steel cables I was told had to be replaced.  Getting a worse and worse sense of fullfilment as the days go by.  [smiley=nervous.gif]

[ccr]

Call them up in your usually calm and persistant demeanor and question the bill and offer them the wonderful opportunity to reimburse you with product that you want not the stuff they thought that you wanted.

[JR]

Thanks MFG, just reminded me that I got ripped off again, on my stainless steel cables I was told had to be replaced.

[MObe]

 Brake lines have to be replaced with 2" over stock.
 Throttle cables only need to be rerouted.
  Clutch line is fine.
    Mike

[WaSEEG]

For those of you who haven't made the change to the 575's Custom Chrome part number 26145 (one piece clamp )will work for the SEEG's ( and I presume all electra glides) without modification.  The mounting holes are already recessed and its a direct bolt on.  It can be found at page 4.52 of the '05 CC catalog and costs a mere $15.24.

Dan

[roadrunner]

Anyone had a 6 speed trans and have to replace the clutch cable to?  Dealer says it is to tight.