Topic: 04 Pumpkin, Stop turn run signal kit (Read 2562 times)

CVOwner · « **on:** October 21, 2005, 07:11:25 AM »

Does the MOCO have the stop-turn-run brake light setup for the 04's? I found the visor trim rings and red lenses. I cant find the plugin. I have the Kuryakyn, laydown LED stoplight and would like to have the plug in like I have on my 99 Heritage. HELP! [smiley=nixweiss.gif]

mr_magoo · « **Reply #1 on:** October 21, 2005, 08:53:11 AM »

I gottem on my 04, it is an HD part will post the part # when I get home.

JCZ · « **Reply #2 on:** October 21, 2005, 10:47:14 AM »

I just put it on my 04 about two weeks ago. Don't know the part number, but it appears to be the same for all bikes as it wasn't model specific and it's the same one that I put on Terri's Dyna Low Rider last week.

grc · « **Reply #3 on:** October 21, 2005, 11:03:55 AM »

Quote

Does the MOCO have the stop-turn-run brake light setup for the 04's? I found the visor trim rings and red lenses. I cant find the plugin. I have the Kuryakyn, laydown LED stoplight and would like to have the plug in like I have on my 99 Heritage. HELP! [smiley=nixweiss.gif]

You won't find one listed for the FLHTCSE due to the narrow light bar.

BobP · « **Reply #4 on:** October 21, 2005, 05:02:01 PM »

Another option for running lights, brake lights and turn signals is to use the Biketronics unit:
http://www.biketron.com/item.html?PRID=1112045

porthole · « **Reply #5 on:** October 21, 2005, 07:10:53 PM »

I bought the kit for the FLH and then the red lens kit with the trim rings (which are plastic,

).

I really don't care if the lens spread is legal, I like the all red look out back anyway. Besides there is so much chrome on the red bike I think the LE won't "notice" it.

Evil

?

e4seter · « **Reply #6 on:** October 21, 2005, 09:40:25 PM »

Quote

You won't find one listed for the FLHTCSE due to the narrow light bar.

CVOwner · « **Reply #7 on:** October 22, 2005, 08:54:42 PM »

Quote

Another option for running lights, brake lights and turn signals is to use the Biketronics unit:
http://www.biketron.com/item.html?PRID=1112045

BobP · « **Reply #8 on:** October 24, 2005, 02:13:36 AM »

Quote

I've never seen or heard of this product before. This unit plus two red bulbs and I'd be in business. I worry about the aftermarket electronics though. You say no problems with the alarm? or check engine light?

Biketronics is located in Ventura County, CA and may be more locally popular than elsewhere.

spydglide · « **Reply #9 on:** October 24, 2005, 08:19:59 AM »

Does anyone know if someone makes a TrueRed bulb to use in the turnsignals on rear like the TrueAmber or NaturalAmber bulbs for the front? So we wouldn't have the color melt/peel off of the red bulbs. I'm thinking of changing to this biketronics unit that BobP lists from Ventura, Ca. Sounds like a good unit to offer all functions to the rear turnsignals and good track record too. 8-) spyder

Twolanerider · « **Reply #10 on:** October 24, 2005, 11:03:23 AM »

Quote

Does anyone know if someone makes a TrueRed bulb to use in the turnsignals on rear like the TrueAmber or NaturalAmber bulbs for the front?

grc · « **Reply #11 on:** October 24, 2005, 12:15:29 PM »

Quote

Red bulbs?

Red bulbs for the rear turn signals if you intend to use clear or smoked lenses with a multifunction (run/stop/turn) controller.

spydglide · « **Reply #12 on:** October 24, 2005, 12:20:20 PM »

Quote

Red bulbs?

Yep, to allow the continued use of the smoked turnsignal lens on the rear after adding the stop/run functions to those lights. 8-)

Twolanerider · « **Reply #13 on:** October 24, 2005, 01:06:38 PM »

Quote

Yep, to allow the continued use of the smoked turnsignal lens on the rear after adding the stop/run functions to those lights.

Twolanerider · « **Reply #14 on:** October 24, 2005, 01:14:32 PM »

Have to remember boys and girls that whenever you're looking for anything weird; look to eBay.

spydglide · « **Reply #15 on:** October 24, 2005, 02:10:32 PM »

thanks 2lane.......just bought 'em........hope they work. [smiley=nervous.gif] spyder

CVOwner · « **Reply #16 on:** October 31, 2005, 01:11:48 AM »

Quote

Another option for running lights, brake lights and turn signals is to use the Biketronics unit:
http://www.biketron.com/item.html?PRID=1112045

grc · « **Reply #17 on:** October 31, 2005, 08:48:38 AM »

Quote

Bob,

How can it be run/turn/brake if its only a single filament bulb? Is the HD one brake/turn only? Does the unit from Biketronics actually add running capabilities to it??? [smiley=nixweiss.gif]

CVOwner

There are several different companies offering run/brake/turn controllers, including Biketronics, Kuryaken (gotta learn how to spell that), H-D, etc.

spydglide · « **Reply #18 on:** October 31, 2005, 10:44:09 AM »

AMEN to that, Brother Jerry!

spyder

mrmagloo · « **Reply #19 on:** October 31, 2005, 11:31:12 AM »

As an FYI, I installed the Kuryakyn #4859 on my FXSTDSE2 and ran into the same issues with regards to the rear turn signal bulbs. On the first day with the stock ambers, I got pulled over, so I figured I better get this resolved quickly.

I did a ton of searches for Red 1156 bulbs and did order the 10 pack from the guy on Ebay. Unfortunately, those bulbs look almost pink next to the deep rich red of the stock tail lamp.

Next, I tried buying a set of those red colored bulb covers and those on top of the red bulbs helped create a deeper red. The problem was, the covers add a weird effect to the bulbs with the reflector, which is a little hard to explain, but it looked ridiculous.

Finally, I just ran to the HD dealer and bought the red lens from the kit mentioned above with clear bulbs and it looks pretty good. At least the red matches pretty good across all three lamps. And, the rear visability at night is a remarkable improvement.

While I still would love to find some red bulbs that will work with the stock smoked lenses, until I find something, this set up works pretty good and will keep the cops off my back. I have thought of smoke tinting the red lens too, but I'll hold off on that as a last resort. Hopefully, I stumble on some decent red bulbs somewhere.

grc · « **Reply #20 on:** October 31, 2005, 12:00:33 PM »

I haven't ordered anything from this place yet, but these look promising.

mrmagloo · « **Reply #21 on:** October 31, 2005, 01:08:48 PM »

FWIW, the LB1156RJ look very similar to the bulbs I have that look pink. Imho, the darker ones just above LB1156RS look pretty interesting.

BobP · « **Reply #22 on:** November 01, 2005, 03:20:48 PM »

Quote

Quote from CVOwner on Oct 30th, 2005, 10:11pm:

Bob,

How can it be run/turn/brake if its only a single filament bulb? Is the HD one brake/turn only? Does the unit from Biketronics actually add running capabilities to it???

CVOwner

There are several different companies offering run/brake/turn controllers, including Biketronics, Kuryaken (gotta learn how to spell that), H-D, etc. They get the running light feature with a single element bulb by reducing the current for run & going to full current for brake. Not as dramatic as going from no light to full output when braking, but IMHO every extra bit of light in the rear, either running or braking, is a plus. If you've ever had some brain dead yo-yo rear end you on your bike, like I have, you know what I mean.

Jerry

CVOwner,
My apologiies for not seeing your question until now but my thanks to Jerry for answering your question so well.
My evaluation of Biketronics two level voltage for running vs brake light signal intensity is that they are very similar to the levels seen on the stock tail light.

And to echo Jerry's comments about being as conspicuous as possible, I also added these LED strips under the tourpak. All of the strips act as running and stop lights and the outboard strips work as signal lights as well.

CVOwner · « **Reply #23 on:** November 02, 2005, 06:07:35 AM »

Quote

And to echo Jerry's comments about being as conspicuous as possible, I also added these LED strips under the tourpak.

Twolanerider · « **Reply #24 on:** November 02, 2005, 11:01:58 AM »

Quote

I like the look of those led's. I dont have a tour pack yet but have decided on the spoiler light when I do get it, (which will be soon). Is it a direct plugin? Or (dread) do I have to do some fancy wiring? Because, if I do, I need someone to help me with it.

CVOwner

CVO, the spoiler light is a direct plug in.....

At least it is if you don't mind having to remove the seat prior to removing the tour pak. The harness that comes with the spoiler lights connects up at the accessory connector in front of the batter. So obviously you have to remove the seat and unhook it first if you want to take off the tour pak.

If you're going to mount a fixed tour pak it's really no big deal. If you're going to mount a detachable pack you lose some of the detachable's convenience. The only thing you have to do, however, is get a matching set of connectors and turn the one long harness in to two shorter ones. Leave yourself a connection down by the strut so you can unplug it without having to first raise the seat. It's really not a difficult chore for the added convenience.

WFP · « **Reply #25 on:** November 02, 2005, 11:09:57 AM »

Quote

CVO, the spoiler light is a direct plug in.....

At least it is if you don't mind having to remove the seat prior to removing the tour pak.

Twolanerider · « **Reply #26 on:** November 02, 2005, 11:17:03 AM »

So kind of an intermediate approach Bill? I'd not even thought of that. I placed the new connector back tucked kind of "inside" the rear filler strip. It's in that area and partially exposed above it when it's connected to to the tour pak and hidden completely behind it when the tour pak is off. Both ways are going to make it easier though. [smiley=xyxthumbs.gif]

spydglide · « **Reply #27 on:** November 05, 2005, 07:26:20 PM »

Quote

I did a ton of searches for Red 1156 bulbs and did order the 10 pack from the guy on Ebay. Unfortunately, those bulbs look almost pink next to the deep rich red of the stock tail lamp.

Hopefully, I stumble on some decent red bulbs somewhere.

Well, I hate to hear that, 'cause I bought the same 10 bulb pack of red bulbs from the eBay dude, too. Have not had a chance to try them yet, but if they're 'pinkish', will have to find some red ones....let me know if you find some. How about those LED bulbs that fit into the bulb socket like a reg. bulb? Do they come in Red? [smiley=nixweiss.gif] spyder [smiley=nixweiss.gif]

Author Topic: 04 Pumpkin, Stop turn run signal kit (Read 2562 times)