www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2012 FLHTCUSE new gauges  (Read 4799 times)

0 Members and 1 Guest are viewing this topic.

TexasBowhunter

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 335
  • 09 Street Glide
2012 FLHTCUSE new gauges
« on: October 29, 2011, 09:59:31 AM »
I need some help here guys...
I noticed when the street glide came out with the new composite looking gauges I thought they looked sweet...however they did not offer the other 2 gauges offered for fitting in all the holes...(The S/G with the tweeters in the dash 2011?) Not the titanium face
I think I saw that the 2012 FLHTCUSE have the complete set of gauges...
I'm needing the numbers so I can order them...
Also does Harley offer the Oil Temp Gauge yet in that pattern?
thanks
paul
Logged
Ride safe

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50545
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 2012 FLHTCUSE new gauges
« Reply #1 on: October 29, 2011, 10:16:22 AM »
You're wanting to lose the tweeters to gain the two gauges back?
Logged

NorEaster

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 139
  • FLHRSEI.ORG

    • CVO1: 2006 FLSTFSE2 Nebula Yellow / Cobalt Blue
    • CVO2: 2012 FLHXSE3 Ruby Red / Typhoon Maroon
Re: 2012 FLHTCUSE new gauges
« Reply #2 on: October 29, 2011, 10:56:20 AM »
Quote from: Twolanerider on October 29, 2011, 10:16:22 AM
You're wanting to lose the tweeters to gain the two gauges back?

From his signature he appears to have an 09' SG so would not have the tweeters.  Sounds like he is just looking to upgrade his current gauges with the CVO ones.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50545
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 2012 FLHTCUSE new gauges
« Reply #3 on: October 29, 2011, 11:24:18 AM »
Quote from: NorEaster on October 29, 2011, 10:56:20 AM
From his signature he appears to have an 09' SG so would not have the tweeters.  Sounds like he is just looking to upgrade his current gauges with the CVO ones.

I've got the signatures turned off in the site settings so never see those.  Just saw the Street Glide listed on the left and mentioned in the post.   :oops:
Logged

TexasBowhunter

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 335
  • 09 Street Glide
Re: 2012 FLHTCUSE new gauges
« Reply #4 on: October 29, 2011, 11:43:00 AM »
Quote from: NorEaster on October 29, 2011, 10:56:20 AM
From his signature he appears to have an 09' SG so would not have the tweeters.  Sounds like he is just looking to upgrade his current gauges with the CVO ones.
\This is what I'm after
I presently have the spun aluminum and am seeking different look
Thanks
paul
Logged
Ride safe

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: 2012 FLHTCUSE new gauges
« Reply #5 on: October 29, 2011, 01:44:47 PM »

I don't see a kit listed in the accessory catalog for the Diamond Cut gauges, just the Titanium, but the following individual part numbers might do the trick.  There is an oil temp gauge for the Titanium set, but I can't find one for the Diamond Cut.

Speedo, MPH       -  70731-10      $271.00
Tachometer         -  74740-10        208.00
Oil Pressure         -  74727-10         72.99
Fuel                   -  74741-10         85.00
Volt Meter           -  74743-10         55.00
Air Temp             -  74742-10         72.99


Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

TexasBowhunter

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 335
  • 09 Street Glide
Re: 2012 FLHTCUSE new gauges
« Reply #6 on: October 29, 2011, 03:52:42 PM »
Quote from: grc on October 29, 2011, 01:44:47 PM
I don't see a kit listed in the accessory catalog for the Diamond Cut gauges, just the Titanium, but the following individual part numbers might do the trick.  There is an oil temp gauge for the Titanium set, but I can't find one for the Diamond Cut.

Speedo, MPH       -  70731-10      $271.00
Tachometer         -  74740-10        208.00
Oil Pressure         -  74727-10         72.99
Fuel                   -  74741-10         85.00
Volt Meter           -  74743-10         55.00
Air Temp             -  74742-10         72.99


Jerry

Thanks Jerry
paul
Logged
Ride safe

Cvostu

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5135

    • CVO1: 2023 Whiskey Neat road glide custom
    • CVO2: 2019 Mako Shark Fade road glide custom
Re: 2012 FLHTCUSE new gauges
« Reply #7 on: November 04, 2011, 07:20:16 AM »
Why would anyone want the air temp gauge? :nixweiss:
Logged

glenn bob

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 88
  • 2012 CVO Ultra
Re: 2012 FLHTCUSE new gauges
« Reply #8 on: November 25, 2011, 11:47:24 AM »
Especially (air temp) in analog.  2012 has them. They must have needed to fill a hole.
Logged
Glenn bob

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: 2012 FLHTCUSE new gauges
« Reply #9 on: November 25, 2011, 11:51:58 AM »
I wish that Harley would wake up and use an oil temp gauge instead of air temp.  At least offer it as an option for those of us that have the SE gauges...
Logged
2012 Black/Orange SEUC

RedDevil

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6170
  • EBCM #747.2 It's all good

    • CVO1: '11 FLTRUSE Gray Ghost
    • CVO2: '12 FLHXSE3 Hot Citrus/Antique Gunstock
Re: 2012 FLHTCUSE new gauges
« Reply #10 on: November 25, 2011, 12:16:46 PM »
Quote from: erniezap on November 25, 2011, 11:51:58 AM
I wish that Harley would wake up and use an oil temp gauge instead of air temp.  At least offer it as an option for those of us that have the SE gauges...
I'm sure they'll come out with one Earnie.  They have for all the previous CVO gauges.  But I'm with you.  I've never understood the ambient air temp gauge.  That has never made sense to me.

:devil:
Logged

2012 FLHXSE3
Hot Citrus/Antique Gunstock

2k

  • My ignorance is just as good as your knowledge, when my information changes, I alter my conclusions
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7988
  • monter le cheval de fer (French)
    • NC


    • CVO1: 2013 SERK-Dressed in BLUE of course.
    • CVO2: 2002 Supercharged HD F150 512 RWHP
    • CVO3: 1956 BelAir Sports Coupe
Re: 2012 FLHTCUSE new gauges
« Reply #11 on: November 28, 2011, 10:00:41 AM »
Why put it in at the Factory, when they know 80% of riders will change it out :soapbox:
Logged
Most Honda Goldwing riders will blink when hit in the head  with a ball-peen hammer (sans helmet)

RedDevil

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6170
  • EBCM #747.2 It's all good

    • CVO1: '11 FLTRUSE Gray Ghost
    • CVO2: '12 FLHXSE3 Hot Citrus/Antique Gunstock
Re: 2012 FLHTCUSE new gauges
« Reply #12 on: November 28, 2011, 10:44:13 AM »
Quote from: 2ksoftail on November 28, 2011, 10:00:41 AM
Why put it in at the Factory, when they know 80% of riders will change it out :soapbox:
Oh, that's a very simple answer...$$$$$$.  Why give someone something when you know you can turn around and get more money out of them for an after-the-sale install?  Just makes good business sense, and we all drink the kool-aid and go along with it. 

:devil:
Logged

2012 FLHXSE3
Hot Citrus/Antique Gunstock

olli

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 63

    • CVO1: FLHTCUSE4
Re: 2012 FLHTCUSE new gauges
« Reply #13 on: November 28, 2011, 02:11:03 PM »
Quote from: cvostu on November 04, 2011, 07:20:16 AM
Why would anyone want the air temp gauge? :nixweiss:
I used it the following way: Purchased a VDO mechanical air pressure gauge, disassembled it and disassembled the air temp gauge too. Obtained the glass, face and needle from the air temp g and assembled into pressure gauge. Looks now similar than other small gauges except that the needle is in the center of the gauge :). (Here in Eu they don´t sell pressure gauges that has needle axle at the lower section of the face.) Now I can see the relative pressure in my Legend rear shocks! 8)
Logged
 

Page created in 0.154 seconds with 22 queries.