www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: Fatboy on June 15, 2006, 01:52:23 PM

Title: Re: Exhaust Leak Test:
Post by: Fatboy on June 15, 2006, 01:52:23 PM

Two ways I've heard of:

1: Spray a really soapy water solution around every connection while the bike is cold....start the bike and watch for bubble's or spitting.

2: Using a candle type lighter start the bike and run the flame along all connections looking for the flame to flicker or blow out.

Title: Re: Exhaust Leak Test:
Post by: magicl1 on June 15, 2006, 03:35:40 PM

Quote

Two ways I've heard of:

1: Spray a really soapy water solution around every connection while the bike is cold....start the bike and watch for bubble's or spitting.

2: Using a candle type lighter start the bike and run the flame along all connections looking for the flame to flicker or blow out.

Thanks Fatboy!  Too simple for me to figure out :o

[highlight]Update:  No leaks![/highlight]  [smiley=huepfenjump3.gif]